Microplate Barcode Labeler User Guide - Agilent Technologies

134
Chapter 6: Running a print job
VCode User Guide
3. In the Data Schema Selection box, define the schema for each side
of the plate that you want to label:
a. Select the row corresponding to the first side of the plate that
you want to label.
b. Double-click in the Schema column and select the schema to
use from the list box that appears.
Repeat for other sides of the plate as needed, using [no schema] for
sides that will not be labelled.
Saving a print job
To save a print job:
1. In PlateTag, navigate to Jobs > Save.
2. Navigate to the folder in which you want to save the print job, enter a
name for the file, and click Save.
Opening a print job
To open a print job:
1. In PlateTag, navigate to Jobs > Open.
You can only have one print job open at a time.
Related information
For more information about...
See...
Creating one or more schemas “Creating a schema” on page 125
The label format for the print job
“Workflow for designing a label format”
on page 87
Starting PlateTag “Starting PlateTag” on page 58
Starting the labelling operation for
a production run
“Starting a production labelling run” on
page 135