Microplate Barcode Labeler User Guide - Agilent Technologies
Microplate Barcode Labeler User Guide - Agilent Technologies
Microplate Barcode Labeler User Guide - Agilent Technologies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 6: Running a print job<br />
VCode <strong>User</strong> <strong>Guide</strong><br />
109<br />
Setting the locations of stored files<br />
Introduction<br />
PlateTag saves information in XML files and text files stored in folders of<br />
your choice. The default storage location is in the default VCode<br />
installation folder: C:\\Program Files\Velocity11\VCode.<br />
If you want to store the information on a networked file server or other<br />
storage disk, you can change the location.<br />
We may ask you to send one or more of these files if we are helping you<br />
to troubleshoot a problem.<br />
Before you start<br />
This procedure assumes that PlateTag is already open.<br />
Procedure<br />
For each type of information, there is one XML file or text file. Even if you<br />
define three schemas, all the information will be saved in one schema<br />
XML file.<br />
To set the location of a stored file:<br />
1. In PlateTag, select Edit > Preferences.<br />
The PlateTag Preferences dialog box opens.<br />
2. Click the ellipsis button next to one of the saved files.<br />
3. In the browser dialog box, navigate to the folder in which you want<br />
to save the file, and click Open.<br />
4. Click OK to close the PlateTag Preferences dialog box.