TurboCAD Pro V15 - Construction Drawings - Textual Creations

Left mouse click the two extrusions to perform the intersection. In progress below.
This intersection has created the upper left corner of one raised panel.
Select the Simple Extrude tool from the 3D Object toolbar.
Select the stile profile as the object to extrude. Tab into the Inspector Bar and enter 80 in the Height
field. Press Enter.
Press the Space Bar to exit the tool.
Select the raised panel corner and then left mouse click the blank box next to the Raised Panels name on
the Design Director. This assigns the selection to the layer and the object disappears from the drawing as
the layer is turned off.
Alternately a user can select the layer name from the layer dropdown menu on the Property toolbar to
assign the selection to the desired layer. Note too that layers can be turned off and on and locked and
unlocked through this dropdown menu. Select the two blue raised panel profiles and assign them to the
2D Profiles layer. In progress below.
72