TurboCAD Pro V15 - Construction Drawings - Textual Creations
TurboCAD Pro V15 - Construction Drawings - Textual Creations TurboCAD Pro V15 - Construction Drawings - Textual Creations
Right mouse click and select Close from the local menu. Press Ctrl + K to open the Select by Colors dialogue. Select Green and click OK. Press Delete to remove the trace aids. It will be a little while before getting back to this last profile. Switch to Isometric SE view. Select the door stile profile, expansion gasket profile and the raised panel profile. Press D SEKE and relocate (V SEKE) the reference point to the lower left corner, as indicated in the picture below. Left mouse click on the reference point of the selection to pick it up. Move the cursor to the lower left corner of the threshold profile and V SEKE snap the selection in place. In progress below. With the profiles still selected Tab into the Inspector Bar and enter 1/8 in the Delta X field and 1 15/16 in the Delta Z field. Press Enter. 57
Select the Simple Extrude tool from the 3D Object toolbar. Select the horizontal raised panel profile as the object to extrude. Move the cursor to upward and left mouse click when the top of the extrusion passes beyond the vertical raised panel profile. In progress below. Select the vertical raised panel profile as the object to extrude. Move the cursor to the left and left mouse click when the side of the extrusion passes beyond the horizontal raised panel profile. In progress below. Select the 3D Intersect tool from the Boolean & Facet toolbar. 71
- Page 1 and 2: TurboCAD Pro V15 - Construction Dra
- Page 3 and 4: Table of Contents __________ Table
- Page 5 and 6: through experience, but hopefully s
- Page 7 and 8: Save the drawing now with the file
- Page 9 and 10: Select Blue from the color dropdown
- Page 11 and 12: G SEKE snap the first point of the
- Page 13: Press the Space Bar to exit the too
- Page 17 and 18: Select the 3D Add tool from the Boo
- Page 19 and 20: Press Ctrl + T to open the Select b
- Page 21 and 22: Switch to Isometric SE view. Select
- Page 23 and 24: Select the Wireframe tool to end th
- Page 25 and 26: Select the bottom six dowel pins. T
Select the Simple Extrude tool from the 3D Object toolbar.<br />
Select the horizontal raised panel profile as the object to extrude. Move the cursor to upward and left<br />
mouse click when the top of the extrusion passes beyond the vertical raised panel profile. In progress<br />
below.<br />
Select the vertical raised panel profile as the object to extrude. Move the cursor to the left and left mouse<br />
click when the side of the extrusion passes beyond the horizontal raised panel profile. In progress below.<br />
Select the 3D Intersect tool from the Boolean & Facet toolbar.<br />
71