TurboCAD Pro V15 - Construction Drawings - Textual Creations

2D Door Profiles
The door profiles will now be created in much the same manner.
The first profile will be the Stile profile – working toward the shape indicated below.
Switch to World Plan view.
Select the Rectangle tool from the Line toolbar.
Select Green from the color dropdown menu on the Property toolbar.
G SEKE snap the first point of the rectangle to a grid intersection in a clear area of the drawing. Move
the cursor in a right upwardly direction for a short distance and then Tab into the Inspector Bar and enter
6 1/2 in the Size A field and 1 3/4 in the Size B field. Press Enter.
Select the Parallel tool from the Line toolbar.
Select the right line of the new rectangle as the line to go parallel from. Tab into the Inspector Bar and
enter 1/2 in the Offset field. Press Enter.
Select the Rectangle tool from the Line toolbar.
V SEKE snap the first point of the rectangle to the top vertex of the offset line. Move the cursor in a left
downwardly direction for a short distance and then Tab into the Inspector Bar and enter 1/8 in the Size
A field and Size B fields. Press Enter.
44