TurboCAD Pro V15 - Construction Drawings - Textual Creations

G SEKE snap the first point of the rectangle to a grid intersection in a clear area of the drawing. Move
the cursor in a right upwardly direction for a short distance and then Tab into the Inspector Bar and enter
1.75 in the Size A field and 1.5 in the Size B field. Press Enter.
V SEKE snap the first point of the next rectangle to the lower right corner of the first rectangle. Move
the cursor in a right upwardly direction for a short distance and then Tab into the Inspector Bar and enter
6 1/16 in the Size A field and 7/16 in the Size B field. Press Enter.
Select the Edit Tool from the Select toolbar.
Select the longer horizontal rectangle as the object to edit. Place the cursor over the upper left node and
when the four directional arrow cursor appears left mouse click to pick up the node. In progress below.
Move the cursor upward to the middle of the right line of the left rectangle and M SEKE snap the node
in place. In progress below.
35