14.04.2014 Views

PEHA Product Catalogue 2008 - US Ship Supply

PEHA Product Catalogue 2008 - US Ship Supply

PEHA Product Catalogue 2008 - US Ship Supply

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Article Designation Colour Packed Article No. Code No. R<br />

Easywave adapter receiver<br />

SCHUKO adapter, 230 V, 50 Hz.<br />

Up to 32 transmitters can be assigned to one receiver. 1 4611 FU-E ST 381413 3<br />

Selectable functions:<br />

• 2-pushbutton operation with ON/OFF functions<br />

• 1-pushbutton operation with ON/OFF/ON functions,<br />

OFF with operating time longer than 1.5 sec.<br />

• Staircase lighting, t = 7 min. (fixed)<br />

Technical data:<br />

Protection class: IP 20<br />

Switching capacities:<br />

Filament lamps 230 V<br />

2300 W<br />

High voltage halogen lamps 230 V 1500 W<br />

Transformers and inductive loads 600 VA<br />

Inrush current<br />

max. 80 A/20 ms<br />

Electronic ballasts approx. 4 electronic ballasts directly switchable<br />

(dependent on model).<br />

Note electronic ballast peak inrush current.<br />

When switching more a power relay must be used.<br />

Easywave diagnostic tool<br />

Easywave diagnostic tool for checking the<br />

Easywave radio signal strength,<br />

dimensions: W 66 x H 112 x D 23 mm, 1 460 TEST 378613 3<br />

battery: 9 V Block (not supplied)<br />

Easywave radio<br />

Aerial for series flush-mounting receiver<br />

External aerial with magnetic base.<br />

Improves the reception of Easywave series flush-mounting receivers,<br />

that are installed in distribution boards with metal doors. 1 460 ANT 378213 3<br />

For connecting to an Easywave series flush-mounting receiver<br />

article no. 461 FU-E, 462 FU-E, 463 FU-E or interface.<br />

Cable length: 2.50 m<br />

Dimensions: Magnetic base Ø 29 mm<br />

Overall height 96 mm<br />

Easywave PHC interface<br />

The Easywave PHC interface allows a connection to be set up<br />

between the Easywave transmitters and receivers and the<br />

PHC system, 72 mm wide (4 module widths). 1 940 FU 260617 7<br />

Receive characteristics:<br />

The interface can receive radio telegrams from Easywave<br />

transmitters, e.g. 32 x 2-channel wall transmitters or 16 x 4-channel<br />

wall transmitters can trigger PHC activities.<br />

Transmit characteristics:<br />

The interface can transmit radio telegrams to Easywave receivers<br />

and trigger activities from the PHC system.<br />

The Easywave PHC interface 940 FU has to be programmed with<br />

the PHC software from version 2.6.<br />

Technical data:<br />

Power supply: 24 V via the PHC bus<br />

Power consumption: 75 mA (normal mode)<br />

100 mA (programming)<br />

Operating controls: 2 pushbuttons "Program" and "Send/Clear",<br />

5 pole address selector switch<br />

Display elements: 2 LEDs for transmit and receive<br />

(within the cover),<br />

2 x 7-segment displays for channel setting<br />

(under the cover)<br />

Connections: Aerial socket for an external aerial<br />

(460 ANT is needed),<br />

2 Western connectors for bus connection<br />

Easywave<br />

radio<br />

45

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!