PEHA Product Catalogue 2008 - US Ship Supply

Article Designation Colour Packed Article No. Code No. R
Thermoelectric actuator 24 V AC/DC
for operating valves in combination with a PHC output module. white 1 681/24 TSA 947997 7
Identical to thermoelectric actuator 681 TSA, 230 V.
Technical data:
Operating voltage: 24 V AC/DC, +20%...-10%, 0–60 Hz
Current consumption: 75 mA/approx. 1.8 W
Inrush current: 250 mA (max. 2 min.)
Important: The 24 V supply must be from a separate power
supply, and not from the PHC power supply of the PHC modules.
PHC
To mount on the valve a separate adapter is required
which must be ordered.
Valve adapter for thermoelectric actuator
article no. 681 TSA and 681/24 TSA 1 680-50 948297 7
for valves manufactured by: Honeywell&Braukmann, Reich,
Landis&Gyr, MNG or Cazzaniga
Valve adapter for thermoelectric actuator
article no. 681 TSA and 681/24 TSA 1 680-80 948397 7
for valves manufactured by: Heimeier, Herb, Onda,
Oventrop (M 30 x 1.5) and Schlösser (from 1993)
Valve adapter for thermoelectric actuator
article no. 681 TSA and 681/24 TSA 1 680-78 948497 7
for valves manufactured by: Danfoss RA
Valve adapter for further manufacturers on request.
PHC
Easywave PHC interface
The Easywave PHC interface allows a connection to be set up
between the Easywave transmitters and receivers and the
PHC system, 72 mm wide (4 module widths). 1 940 FU 260617 7
Receive characteristics:
The interface can receive radio telegrams from Easywave
transmitters, e.g. 32 x 2-channel wall transmitters or 16 x 4-channel
wall transmitters can trigger PHC activities.
Transmit characteristics:
The interface can transmit radio telegrams to Easywave receivers
and trigger activities from the PHC system.
The Easywave PHC interface 940 FU has to be programmed with
the PHC software from version 2.6.
Technical data:
Power supply: 24 V via the PHC bus
Power consumption: 75 mA (normal mode)
100 mA (programming)
Operating controls: 2 pushbuttons "Program" and "Send/Clear",
5 pole address selector switch
Display elements: 2 LEDs for transmit and receive
(within the cover),
2 x 7-segment displays for channel setting
(under the cover)
Connections: Aerial socket for an external aerial
(460 ANT is needed),
2 Western connectors for bus connection
Easyclick PHC/PHC Compact interface
The Easyclick PHC/PHC Compact interface allows a connection
to be set up between the Easyclick radio transmitters and the
PHC system or PHC compact system,
incl. 30 cm connecting cable, 72 mm wide (4 module widths). 1 940 FU C 262217 7
The Easyclick PHC/PHC Compact interface has 32 inputs for
Easyclick transmitters and converts their radio signals into input
signals for the PHC system or PHC compact system. The consumers
are controlled via output, roller shutter and dimmer modules.
Up to 240 transmitters can be ON/OFF trained.
The Easyclick PHC/PHC Compact interface 940 FU C has to be
programmed with the PHC software from version 2.4.
Technical data:
Power supply: 24 V DC via the PHC bus
Internal consumption: approx. 30–40 mA
Operating controls: 2 pushbuttons "Program" and "Clear"
Display elements: 1 LED receive
3 x 7 segment display for
channel setting
Transmission frequency: 868.3 MHz
Connections: 2 modular sockets for the PHC bus
1 aerial socket for an external aerial
(460 ANT is needed)
37