PEHA Product Catalogue 2008 - US Ship Supply

Article Designation Colour Packed Article No. Code No. R
Smoke detector
Surface-mounting, IP 20, Ø = 100 mm, H = 42 mm
For connecting to the PHC system using the JY (ST) Y 2 x 2 x 0.8 mm, comprising scattered light beam sensor article no. 941 SLM and relay socket article no. 941 RSF
with separate close to make contact, for connecting to the PHC input modules 24 V (REG).
Supply voltage: 24 V DC from the PHC power supply 940 SPV
Internal consumption: Standby current 40 µA
Alarm current 100 mA
VdS device authorisation: VdS no. G 293013
Function: The smoke detector 941 SLM is a scattered light beam sensor (optical detector). An infrared diode in an optical chamber transmits a focused light beam
of 3 kHz every 10 seconds. If smoke enters the detector this light beam is deflected and received by the photo-diode, the smoke detector switches to alarm status.
The relay 941 RSF in the socket is activated by the alarm status of the smoke detector. An external optical or acoustic alarm sensor can be activated via the PHC system.
PHC
Smoke detector
for mounting on relay socket article no. 941 RSF pure white 1 941 SLM 242417 7
PHC
Relay socket
with separate close to make contact, for connecting to
the PHC input modules 24 V (REG) 1 941 RSF 242517 7
Pushbutton for all flush-mounting ranges
only for PHC input modules 940/24 EM,
940/24 EM RÜ or 940/24 EM RÜ DIAG
with LED, for indication,
single pole, push to make switch 10 550 LED/PHC 193311 7
LED for use as replacement and retrofitting 10 LED 505/PHC 575511 7
Surface-mounting pushbutton – unbreakable – g – corresponds
to IP 44 – only for PHC input modules 940/24 EM,
940/24 EM RÜ or 940/24 EM RÜ DIAG
with LED, for indication,
single pole, push to make switch 10 655 WAB LED/PHC 304017 7
LED for use as replacement and retrofitting 10 LED 505/PHC 575511 7
Flush-mounting pushbutton with rocker switch
only for PHC input modules 940/24 EM,
940/24 EM RÜ or 940/24 EM RÜ DIAG
with LED, for indication,
single pole, push to make switch pure white 10 752.02 LED/PHC 603417 7
Accessories see "COMPACTA flush-mounting range".
Flush-mounting module with mounting frame
decentralised flush-mounting module
for 58-series switch boxes, for screw fixing, with 1 941/24 EM UP o.A. 286017 7
connecting blocks for den PHC bus, screw terminals
can be combined with the PHC pushbutton covers
PHC single pushbutton xx.941/1 RÜ GL Na,
xx.941/1 GL Na,
xx.941/1 RÜ
PHC 2 gang pushbutton xx.941/2 GL Na
PHC 4 gang pushbutton xx.941/4 Na
PHC infrared cover xx.941 IR, flush-mounting motion detector
front plate xx.410.xx BM
4 external inputs 24 V DC for connecting mechanical
non-illuminated pushbuttons (push to make switch),
length per pushbutton switch max. 25 m
Important: Switch not permissible,
connection to the PHC bus with JY (ST) Y 2 x 2 x 0.8 mm.
PHC infrared cover
for combinations,
cover with a locally-operated pushbutton and infrared receiver,
suitable for PHC flush-mounting module 941/24 EM UP o.A.,
matching 21 channels infrared remote control 871 IR.
STANDARD white 1 80.941 IR w 351017 7
pure white 1 80.941.02 IR 351517 7
DIALOG pure white 1 95.941.02 IR 352117 7
aluminium 1 95.941.70 IR 353217 7
AURA pure white 1 20.941.02 IR 353317 7
anthracite 1 20.941.21 IR 353617 7
aluminium 1 20.941.70 IR 353717 7
35