PEHA Product Catalogue 2008 - US Ship Supply

More documents

Recommendations

Info

Zone control/Roller shutter control Article Designation Colour Packed Article No. Code No. R Time switch REG 1 channel weekly timer, 1 811 Z REG 916193 3 16 memory locations (8 x ON/8 x OFF), daily or combined in day blocks, zero-potential changeover contact, 16 A/250 V ohmic load or 2 A/250 V inductive load, power reserve: 25 hours, supply voltage: 230 V AC, 36 mm wide (2 module widths), protection class IP 20 Twilight switch REG with time setting various lux thresholds for dawn and dusk settable, 1 847 RM REG 919193 3 lux range: 3–300 Lux. Timer function permits switching OFF for a predefined period, e.g. at night. Security switching: Switching on for 1 minute after power failure Load: up to 2300 W for light sensor 847 LS-WA Light sensor for exterior assembly for switching relay 847 RM REG and 1 847 LS-WA 917893 3 zone control article no. 848 ZO-xxREG 4 lux ranges from 3–60.000 Lux, exterior assembly IP 54, control voltage 1–10 V Twilight switch for surface-mounting wall installation, IP 54 grey 1 869 DAE WA 943793 3 Technical data: <strong>Supply</strong> voltage: 230 V, 50 Hz Internal consumption active/passive: approx. 1 W Switching contact: 1 push to make switch, µ 16 A, 230 V AC Load max.: 3000 W Lux range: 2–200 Lux ON/OFF switching difference: approx. 50% Switching delay: approx.1 min. Ambient temperature: -50 to +50 °C Cable entry: 2 x M 20 Dimensions: W 73 x H 39 x L 102 mm Protective circuit: illumination is activated in case of a unit failure. Remote/touch dimmer forward phase controlled for ohmic loads 230 V~, 50 Hz, 60–300 W, for quick rail mounting or for screw fixing using the mounting plate provided, for 12 V AC control voltage 1) grey 8 873 EV/12 225513 3 for 230 V control voltage grey 8 873 EV/230 226113 3 1) not to be used in combination with pushbutton switch 42 V with illumination. Electronic current impulse switch 230 V~, 50 Hz µ, for quick rail mounting or for screw fixing using the mounting plate provided, for 12 V control voltage, switching capacity 1500 W/VA white 2 879 TR EV/12 221713 3 Zone control/ Roller shutter control Programmable roller shutter switch Base for flush-mounting installation, 230 V~, 50 Hz, for max. 1 motor 750 VA, running time: 3 min. 1 404 R o.A. 234213 3 Function: Manual operation up to 1 sec. C louvre adjustment, manual operation greater than 1 sec. C self-run for 3 min., time programming for UP and DOWN possible (24 hour cycle) or daily time programming for UP and DOWN possible. External inputs for 1 "up" and 5 "down", 230 V~, 50 Hz, with function as pushbutton selector for group control, wind monitor, key switch or higher order timers. Neutral conductor necessary. Cover for programmable roller shutter switch for base 404 R o.A. STANDARD white 1 80.410 R w 129913 3 arctic 1 80.410 R Aw 131113 3 pure white 1 80.410.02 R 131213 3 DIALOG white 1 95.410.03 R 827313 3 pure white 1 95.410.02 R 827413 3 agate grey 1 95.410.13 R 766313 3 deep black 1 95.410.19 R 845313 3 cobalt blue 1 95.410.49 R 854413 3 brown 1 95.410.26 R 776313 3 aluminium 1 95.410.70 R 318813 3 AURA pure white 1 20.410.02 R 116413 3 anthracite 1 20.410.21 R 117313 3 aluminium 1 20.410.70 R 120013 3 23
Zone control/Roller shutter control Article Designation Colour Packed Article No. Code No. R Roller shutter weely timer/time switch 50 x 50 mm suitable for standard opening, article no. xx.670.xx ZV Base with cover for flush-mounting installation silver 1 814 J silber 925193 3 black 1 814 J schwarz 925393 3 Function roller shutter weely timer: pure white 1 814 J reinweiß 925793 3 For 1000 VA motor with limit switches, opening and closing time programmable per day or in 2 groups for Mon–Fri and Sat–Sun, random generator, switching from manual to automatic operation possible, running time 60 sec., changeable from 1–180 sec., power reserve 1000 hours via battery, reset to factory settings, 230 V~, 50 Hz, neutral conductor necessary, with auxiliary inputs, observe motor manufacturer’s recommendations. Function time switch (change-over via programming): Load max. 1000 W, 2 switching times programmable per day or in 2 groups for Mon-Fri and Sat-Sun, random generator, switching from manual to automatic operation possible. Roller shutter weely timer/time switch 50 x 50 mm suitable for standard opening, article no. xx.670.xx ZV Base with cover for flush-mounting installation silver 1 814 JS silber 925293 3 black 1 814 JS schwarz 925493 3 Function roller shutter weely timer: pure white 1 814 JS reinweiß 925893 3 For 1000 VA motor with limit switches, function cf. article no. 814 J, but with additional sensor connection for connection of sun sensor 800 SS for sun protection and twilight function and glass break sensor 800 GS, 230 V~, 50 Hz, neutral conductor necessary, with auxiliary inputs, observe motor manufacturer’s recommendations. Function time switch (change-over via programming): Load max. 1000 W, 2 switching times programmable per day or in 2 groups for Mon-Fri and Sat-Sun, random generator, switching from manual to automatic operation possible. Sun sensor suitable for roller shutter weely timer article no. 814 JS, 1 800 SS 925593 3 with suction cup fixing for window panes. Diameter: 46 mm Length: 2 m Glass breakage sensor suitable for roller shutter weely timer article no. 814 JS, 1 800 GS 925693 3 fixes to inside of windows using two component adhesive. Dimensions: 8 x 8 x 27 mm Length: 2 m Group control relays for roller shutter motors 250 V AC, µ 6 A, motor load max. 750 VA One or two roller shutter motors can be connected per group 1 409 SR 919293 3 control relay. Venetian blind pushbutton switches are connected for local operation. A venetian blind pushbutton or switch, a time switch (e.g. 814 J/JS) or the programmable roller shutter switch 404 R can be used as a central control unit. <strong>Supply</strong> voltage: 230 V, 50 Hz, +- 10%, neutral conductor necessary Control voltage: 230 V, 50 Hz, +- 10% Current consumption: 10 mA in relay operation Switching capacity: µ 6 A, 250 V AC, motor load max. 750 VA Temperature range: 0–60 °C Screw terminals: solid, 2 x 1.5 mm 2 , 1 x 2.5 mm 2 , flexible 1 x 1.5 mm 2 Dimensions: D 22 x W 52 x H 49 mm Installation: in deep switch boxes or surfacemounting moisture-proof junction box 24
Page 1 and 2: Product catalogue
Page 3 and 4: Colour overview STANDARD Inline STA
Page 5 and 6: Representatives IS P ES GB NL B L C
Page 7 and 8: Basic elements Article Designation
Page 9 and 10: Basic elements Article Designation
Page 11 and 12: T5A H250V~ Min Max 7 8 6 1 2 3 4 5
Page 13 and 14: Electronic devices/Light management
Page 23: Zone control/Roller shutter control
Page 27 and 28: PHC Article Designation Colour Pack
Page 41 and 42: PHC Compact Article Designation Col
Page 43 and 44: Easywave radio Article Designation
Page 45 and 46: Easywave radio Article Designation
Page 47 and 48: Easyclick radio Article Designation
Page 57 and 58: STANDARD Article Designation Colour
Page 71 and 72: STANDARD unbreakable Article Design
Page 73 and 74: DIALOG Article Designation Colour P
Page 75 and 76:
DIALOG Article Designation Colour P
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
AURA Article Designation Colour Pac
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
COMPACTA Built-in range Article Des
Page 97 and 98:
COMPACTA Built-in range Article Des
Page 99 and 100:
Modul 45/Concept 45/Built-in socket
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Hospital/Computer Installation Equi
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Surface-mounting range/COMPACTA Art
Page 123 and 124:
Surface-mounting range Article Desi
Page 125 and 126:
Water-proof range - surface-mountin
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Water-proof range - flush-mounting
Page 133 and 134:
Cast aluminium range - surface/flus
Page 135 and 136:
Cast aluminium range - surface/flus
Page 137 and 138:
Cast aluminium range - built-in ran
Page 139 and 140:
Number index Article No. Code No. R
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
General conditions for the supply o
Page 159 and 160:
Notes 158
Page 161:
Paul Hochköpper GmbH & Co. KG · P
show all

PEHA Product Catalogue 2008 - US Ship Supply

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?