PEHA Product Catalogue 2008 - US Ship Supply

Electronic devices/Light management
Article Designation Colour Packed Article No. Code No. R
FI flush-mounted switch
for protection of connected consumers
Flush-mounting base with clamp terminals, 1 602 Fi o.A. 925993 3
16 A 250 V 50/60 Hz, double pole break contact,
max. leakage current 30 mA, short-circuit-proof up to 3 kA,
surge current resistance 250 A (impulse 8/20)
Cover for FI flush-mounted switch
for flush-mounting base 602 Fi o.A. STANDARD white 1 80.610 Fi w 924293 3
pure white 1 80.610.02 Fi 924393 3
Electronic
devices/Light
management
DIALOG white 1 95.610.03 Fi 924493 3
pure white 1 95.610.02 Fi 924593 3
aluminium 1 95.610.70 Fi 924693 3
AURA pure white 1 20.610.02 Fi 924793 3
anthracite 1 20.610.21 Fi 924893 3
aluminium 1 20.610.70 Fi 925093 3
SENSOLUX Solar-presence detector
for indoor ceiling mounting white 1 482 FU-BM DE 348313 3
Function:
The SENSOLUX Solar-presence detector derives its energy from
solar cells. When fully charged, the detector can run for several
days in complete darkness. The presence detector registers the
presence of persons and measures the current light level. This data
is sent by radio to the SENSOLUX receiver. The parameters are set
on the 2 channel receiver article no. 482 FU-E, via which e.g. two
series of lights can be controlled individually.
For use in rooms without daylight, the presence detector can
optionally be equipped with 2 alkaline batteries (AAA) with
a life span of 8 to 10 years.
Technical data:
Transmission frequency/radio protocol: 868.3 MHz/EnOcean
Supply voltage from 50–200 Lux: solar cells, internal goldcap
Battery supply < 30 Lux: 2 x 1.5 V (AAA)
Start-up time: 5–10 min.
Ambient temperature: +10 to +50 °C
Protection class/approvals: IP 50/CE
Coverage areas approx.:
room height 2.5 m => Ø 5.0 m
room height 3.0 m => Ø 6.0 m
Housing dimensions: 108 x 108 x 26.8 mm
SENSOLUX Energy-controller, 2-channel
Function:
In full automatic mode, the SENSOLUX Solar-presence detector
article no. 482 FU-BM DE registers the presence of persons and
switches on the lighting via the receiver. When no more movement
is detected, the light is switched off with a settable light-on time or
when a specified light value (daylight) is reached.
However, the user can at any time switch the lighting on or off via
conventional or Easyclick radio control buttons.
In semi-automatic mode, the lighting is switched on manually and
switched off via the presence detector.
The light-on time, light level, daylight or twilight parameters
can be set in both modes. The default factory mode is full automatic.
1 482 FU-E 348413 3
Technical data:
Receive frequency/radio protocol: 868.3 MHz/EnOcean
Supply voltage/internal consumption: 230 V~/50 Hz/0.3 W
Ambient temperature: +5 to +50 °C
Protection class/approvals: IP 20/CE
2 channels independently programmable
Connection data per channel:
Filament lamps: 2300 W
Inductive load: 600 VA
Electronic ballast: max. 5 pieces
Housing dimensions: 50 x 50 x 22.5 mm
Connections: Screw terminals
Up to 8 solar presence detector and 8 Easyclick transmitters
can be trained. Neutral conductor necessary.
21