PEHA Product Catalogue 2008 - US Ship Supply

Electronic devices/Light management
Article Designation Colour Packed Article No. Code No. R
Cover for automatic switch 110°
for flush-mounting bases 891-2 AS o.A. and 891-3 AS o.A.
STANDARD white 1 80.810 AS w 997593 3
pure white 1 80.810.02 AS 997693 3
DIALOG white 1 95.810.03 AS 997893 3
pure white 1 95.810.02 AS 997993 3
agate grey 1 95.810.13 AS 996893 3
deep black 1 95.810.19 AS 998193 3
cobalt blue 1 95.810.49 AS 998393 3
brown 1 95.810.26 AS 996993 3
Electronic
devices/Light
management
AURA pure white 1 20.810.02 AS 996293 3
anthracite 1 20.810.21 AS 997293 3
aluminium 1 20.810.70 AS 997393 3
Ceiling-mounted presence detector for lights
Ceiling-mounted presence detector with one 230 V relay output, pure white 1 887 DE-L 949893 3
for presence and brightness-dependent switching of lighting in the
range of 10–1000 Lux.
Technical data:
Detection angle: 360° horizontally,
detection angle can be reduced by clip-on covers.
Mounting height: 2.50–3.00 m
Range: Diameter of max. 20 m, for the detection of persons
moving tangentially. High resolution close coverage area,
diameter of 5 m, for the detection of small movements.
Light value: 10–1000 Lux
Switch off delay: 1–30 min.
Supply voltage: 230 V, 50 Hz, neutral conductor necessary
Switching capacity: Relay output µ 10 A
2300 W Filament lamps 230 V
1000 W Halogen lamps 230 V
1200 VA Fluorescent lamps with ballasts
Peak inrush current max. 80 A/20 ms (approx. 3 electronic
ballasts directly switchable. Note electronic ballast peak inrush
current. When switching more a power relay must be used).
Protection class: IP 20
Dimensions: Diameter 127 mm, height 59 mm
Ceiling-mounted presence detector for lights and ventilators
Ceiling-mounted presence detector with two relay outputs. pure white 1 887 DE-LV 949993 3
Relay output 1 to control the lights,
relay output 2 to control the ventilators.
Technical data as 887 DE-L,
however switch off delay:
Relay output 1, lighting output 1–30 min.
Relay output 2, ventilator output relay output 1 time + 25%
Switching capacity as 887 DE-L, per relay output µ 10 A
Ceiling-mounted presence detector for teaching areas
Ceiling-mounted presence detector with two separate outputs pure white 1 887-2 DE 951393 3
for different lighting zones.
Output 1: according to daylight and by motion
(e.g. a row of windows, window side)
Output 2: according to motion only (e.g. a row of windows,
wall side, and blackboard illumination)
Manual switching on/off via a separate switch
plus automatic switching off.
Detection angle: 360° (can be reduced by fitting the
supplied cover)
Detection range: Body movement 140 m 2 /
small movements 9 m 2
Installation height: 2.5–3 m
Settable lux range, output 1: 10–1000 Lux
Switch off delay: 1–30 minutes
Relay:
10 A/250 V AC
Inrush current: 80 A/20 ms
Load:
Filament lamps/HV 230 V R 2300 W
Fluorescent tube lights L 1200 VA, C 140 uF
Energy-saving lamps 18 W/58 pieces
Low-voltage halogen (toroidal)
500 VA
Low-voltage halogen (electronic transformer)1200 VA
Protection class IP 20
Ceiling-mounted presence detector 24 V
Ceiling-mounted presence detector with zero-potential relay output pure white 1 887/24 DE 951497 7
(motion signal) and 0 to 10 V light sensor output for
zone control Dimming, article no. 848 ZO-D REG.
Detection angle: 360° (can be reduced by fitting the
supplied cover)
Detection range: Body movement 140 m 2 /
small movements 9 m 2
Mounting height: 2.5–3 m
Switch off delay: 1–30 minutes
Relay load: 0.5 A/24 V DC NO (normally open),
zero-potential
Connection voltage: 24 V DC
Internal consumption: active = 0.75 W/standby = 0.25 W
Protection class IP 20
19