PEHA Product Catalogue 2008 - US Ship Supply
PEHA Product Catalogue 2008 - US Ship Supply PEHA Product Catalogue 2008 - US Ship Supply
Electronic devices/Light management Article Designation Colour Packed Article No. Code No. R Inverse phase controlled dimmer Slave 1000 W Dimmer module for inverse phase controlled Slave, 1 439 SL-AB REG 298613 3 capacity extension for dimmer Master 439 M-AB REG, 1000-W-dimming output and 1 slave output, for mounting on DIN rail, 108 mm wide (6 module widths), with memory function, minimum load 60 W. The outputs of the Master and Slave units may be connected in parallel. Analogue output module (1–10 V) Flush-mounted series unit, 108 mm wide (6 module widths), 1 940 AMA 260817 7 for analogue control of dimmable electronic ballasts with 1–10 V DC connection, max. control current senk: 50 mA, relay contact 10 A~, for direct switching of max. 5 electronic ballasts, 6 inputs for mechanical non-illuminated pushbutton switches (push to make switch), the L (phase) is switched on the inputs 0 = Soft ON, dim up 1 = Soft OFF, dim down 2 = Light setting 1 (DIA 1), save and retrieve 3 = Light setting 2 (DIA 2), save and retrieve 4 = Pushbuttons ON/OFF with memory value (last light value) 5 = Switch over to daylight-dependent control with light sensor article no. 940 LS Electronic devices/Light management Light sensor for daylight-dependent control see "PHC". TRONIC transformer, main unit with integrated dimmer function Control with mechanical pushbutton switch, or low-voltage halogen lamps, short-circuit-proof, safe for no-load operation, with thermal overload and short-circuit cut out, inputs for L, N and switched L. Technical data: Input voltage: 230 V~, 50 Hz Output voltage: 12 V AC for 35–105 W white 1 875/105 TTD 244213 3 for 50–150 W white 1 875/150 TTD 244313 3 for 50–200 W white 1 875/200 TTD 244413 3 Extendable by up to 9 TRONIC transformers 835 TT. TRONIC transformer, ancillary units dimmable using TRONIC transformer 875 TTD for low voltage halogen lamps, short-circuit-proof, safe for no-load operation, with thermal overload and short-circuit cut out. Technical data: Input voltage: 230 V~, 50 Hz Output voltage: 12 V AC for 35–105 W white 1 835/105 TT 243413 3 for 50–150 W white 1 835/150 TT 243513 3 for 50–200 W white 1 835/200 TT 243613 3 TRONIC transformer dimmable using PEHA forward phase controlled and inverse phase controlled dimmers for low voltage halogen lamp, short-circuit-proof, safe for no-load operation, with thermal overload and short-circuit cut out Technical data: Input voltage: 230 V~, 50 Hz Output voltage: 12 V AC for 35–105 W white 1 830/105 TT 228713 3 for 50–150 W white 1 830/150 TT 243113 3 for 50–200 W white 1 830/200 TT 243213 3 Motion detector 120° designed to be surface-, wall- and ceiling-mounted, pure white 1 498.02 BM 120 WAB 977693 3 detection angle 120° horizontally, adjustable by +/- 30° by anthracite 1 498.21 BM 120 WAB 977793 3 turning the optics, detection range can be reduced by positioning the lens cover and by vertically tilting the optics. Switched by press-to-break button/switch in the feed line. Technical data: Range (mounting height 2.50 m/+ 22 °C): 10 m Mounting height: 2–4 m, ideal 2.50 m Detection levels: 7 Switching zone: 420 Light value: 0.5 Lux up to daylight brightness, factory setting 7 Lux Protection class: IP 55 ON time: adjustable from 2 sec.–30 min. factory setting 2 min. Pulse mode selectable: 1 sec. ON/9 sec. OFF Supply voltage: AC 230 V +/- 10%, 50/60 Hz Screw terminals: min. 1 mm 2 , max. 2 x 2.5 mm 2 N (neutral) terminal for looping through Dissipation: approx. 1 W Relay device, neutral conductor necessary Switching capacity max.: µ 5 A Filament lamps: 1000 W Fluorescent lamps (ballast): 8 x 58 W (uncompensated) Energy-saving lamps: 4 pieces Dimensions: L 180 x W 86 x D 74 mm 15
Electronic devices/Light management Article Designation Colour Packed Article No. Code No. R Motion detector 290° designed to be surface-, wall- and ceiling-mounted, pure white 1 498.02 BM 290 WAB 977893 3 detection angle 120° horizontally, adjustable by +/- 30° by anthracite 1 498.21 BM 290 WAB 977993 3 turning the optics, detection range can be reduced by positioning the lens cover and by vertically tilting the optics. Switched by press-to-break button/switch in the feed line. Technical data: Range (Mounting height 2.50 m/+ 22 °C): 16 m Mounting height: 2–4 m, ideal 2.50 m Detection levels: 7 Switching zone: 1060 Light value: 0.5 Lux up to daylight brightness, factory setting 7 Lux Protection class IP 55 ON time: adjustable from 2 sec.–30 min., factory setting 2 min. Pulse mode selectable: 1 sec. ON/9 sec. OFF Supply voltage: AC 230 V +/- 10%, 50/60 Hz Screw terminals: min. 1 mm 2 , max. 2 x 2.5 mm 2 N (neutral) terminal for looping through Dissipation: approx. 1 W Relay device, neutral conductor necessary Switching capacity max.: 10 A Filament lamps: 2500 W Fluorescent lamps (ballast): 20 x 58 W (uncompensated) Energy-saving lamps: 8 pieces Dimensions: L 180 x W 86 x D 74 mm Motion detector 290° IR Functions as described for 498.… BM 290 WAB unit, pure white 1 498.02 BM 290 WAB IR 978093 3 but supplied with infrared remote control. anthracite 1 498.21 BM 290 WAB IR 978193 3 The remote control can be used, for example, to switch the motion detector to continuous on/continuous off for up to 4 hours. The remote control can also be used to activate a vacation/holiday function. This function activates a presence simulation, occasionally switching various electrically powered units on and off, this function continues until it is deactivated again. Technical data: Range (Mounting height 2.50 m/+ 22 °C): 16 m Mounting height: 2–4 m, ideal 2.50 m Detection levels: 7 Switching zone: 1060 Light value: 0.5 Lux up to daylight brightness, factory setting 7 Lux Protection class IP 55 ON time: adjustable from 2 sec.–30 min. factory setting 2 min. Pulse mode selectable: 1 sec. ON/9 sec. OFF Supply voltage: AC 230 V +/-10%, 50/60 Hz Screw terminals: min. 1 mm 2 , max. 2 x 2.5 mm 2 N (neutral) terminal for looping through Dissipation: approx. 1 W Relay device, neutral conductor necessary Switching capacity max.: 10 A Filament lamps: 2500 W Fluorescent lamps (ballast): 20 x 58 W (uncompensated) Energy-saving lamps: 8 pieces Dimensions: L 180 x W 86 x D 74 mm Range remote control: max. 5 m Battery type: CR2025 Dimensions remote control: L 87 x W 40 x D 6 mm 12 function buttons Fixture for mounting on the corner of the house wall Support for motion detector 498.xx BM 120 WAB, 498.xx BM 290 WAB pure white 1 98.02 Wi 978293 3 and 498.xx BM 290 WAB IR anthracite 1 98.21 Wi 978393 3 Dimensions: L 87 x W 63 x D 105 mm Remote control Replacement for use with motion detector 498.xx BM 290 WAB IR 1 471 IR 978493 3 (no coding, training not required) 16
- Page 1 and 2: Product catalogue
- Page 3 and 4: Colour overview STANDARD Inline STA
- Page 5 and 6: Representatives IS P ES GB NL B L C
- Page 7 and 8: Basic elements Article Designation
- Page 9 and 10: Basic elements Article Designation
- Page 11 and 12: T5A H250V~ Min Max 7 8 6 1 2 3 4 5
- Page 13 and 14: Electronic devices/Light management
- Page 15: Electronic devices/Light management
- Page 19 and 20: Electronic devices/Light management
- Page 21 and 22: Electronic devices/Light management
- Page 23 and 24: Zone control/Roller shutter control
- Page 25 and 26: Zone control/Roller shutter control
- Page 27 and 28: PHC Article Designation Colour Pack
- Page 29 and 30: PHC Article Designation Colour Pack
- Page 31 and 32: PHC Article Designation Colour Pack
- Page 33 and 34: PHC Article Designation Colour Pack
- Page 35 and 36: PHC Article Designation Colour Pack
- Page 37 and 38: PHC Article Designation Colour Pack
- Page 39 and 40: PHC Article Designation Colour Pack
- Page 41 and 42: PHC Compact Article Designation Col
- Page 43 and 44: Easywave radio Article Designation
- Page 45 and 46: Easywave radio Article Designation
- Page 47 and 48: Easyclick radio Article Designation
- Page 49 and 50: Easyclick radio Article Designation
- Page 51 and 52: Easyclick radio Article Designation
- Page 53 and 54: Easyclick radio Article Designation
- Page 55 and 56: Easyclick radio Article Designation
- Page 57 and 58: STANDARD Article Designation Colour
- Page 59 and 60: STANDARD Article Designation Colour
- Page 61 and 62: STANDARD Article Designation Colour
- Page 63 and 64: STANDARD Article Designation Colour
- Page 65 and 66: STANDARD Article Designation Colour
Electronic devices/Light management<br />
Article Designation Colour Packed Article No. Code No. R<br />
Inverse phase controlled dimmer Slave 1000 W<br />
Dimmer module for inverse phase controlled Slave, 1 439 SL-AB REG 298613 3<br />
capacity extension for dimmer Master 439 M-AB REG,<br />
1000-W-dimming output and 1 slave output,<br />
for mounting on DIN rail,<br />
108 mm wide (6 module widths),<br />
with memory function,<br />
minimum load 60 W. The outputs of the Master and Slave units<br />
may be connected in parallel.<br />
Analogue output module (1–10 V)<br />
Flush-mounted series unit, 108 mm wide (6 module widths), 1 940 AMA 260817 7<br />
for analogue control of dimmable electronic ballasts with<br />
1–10 V DC connection, max. control current senk: 50 mA, relay<br />
contact 10 A~, for direct switching of max. 5 electronic ballasts,<br />
6 inputs for mechanical non-illuminated pushbutton switches (push<br />
to make switch), the L (phase) is switched on the inputs<br />
0 = Soft ON, dim up<br />
1 = Soft OFF, dim down<br />
2 = Light setting 1 (DIA 1), save and retrieve<br />
3 = Light setting 2 (DIA 2), save and retrieve<br />
4 = Pushbuttons ON/OFF with memory value (last light value)<br />
5 = Switch over to daylight-dependent control<br />
with light sensor article no. 940 LS<br />
Electronic<br />
devices/Light<br />
management<br />
Light sensor for daylight-dependent control see "PHC".<br />
TRONIC transformer, main unit<br />
with integrated dimmer function<br />
Control with mechanical pushbutton switch, or low-voltage<br />
halogen lamps, short-circuit-proof, safe for no-load operation,<br />
with thermal overload and short-circuit cut out,<br />
inputs for L, N and switched L.<br />
Technical data:<br />
Input voltage: 230 V~, 50 Hz<br />
Output voltage: 12 V AC<br />
for 35–105 W white 1 875/105 TTD 244213 3<br />
for 50–150 W white 1 875/150 TTD 244313 3<br />
for 50–200 W white 1 875/200 TTD 244413 3<br />
Extendable by up to 9 TRONIC transformers 835 TT.<br />
TRONIC transformer, ancillary units<br />
dimmable using TRONIC transformer 875 TTD<br />
for low voltage halogen lamps, short-circuit-proof, safe for no-load<br />
operation, with thermal overload and short-circuit cut out.<br />
Technical data:<br />
Input voltage: 230 V~, 50 Hz<br />
Output voltage: 12 V AC<br />
for 35–105 W white 1 835/105 TT 243413 3<br />
for 50–150 W white 1 835/150 TT 243513 3<br />
for 50–200 W white 1 835/200 TT 243613 3<br />
TRONIC transformer<br />
dimmable using <strong>PEHA</strong> forward phase controlled and<br />
inverse phase controlled dimmers<br />
for low voltage halogen lamp, short-circuit-proof, safe for no-load<br />
operation, with thermal overload and short-circuit cut out<br />
Technical data:<br />
Input voltage: 230 V~, 50 Hz<br />
Output voltage: 12 V AC<br />
for 35–105 W white 1 830/105 TT 228713 3<br />
for 50–150 W white 1 830/150 TT 243113 3<br />
for 50–200 W white 1 830/200 TT 243213 3<br />
Motion detector 120°<br />
designed to be surface-, wall- and ceiling-mounted, pure white 1 498.02 BM 120 WAB 977693 3<br />
detection angle 120° horizontally, adjustable by +/- 30° by anthracite 1 498.21 BM 120 WAB 977793 3<br />
turning the optics, detection range can be reduced by<br />
positioning the lens cover and by vertically tilting the optics.<br />
Switched by press-to-break button/switch in the feed line.<br />
Technical data:<br />
Range (mounting height 2.50 m/+ 22 °C): 10 m<br />
Mounting height: 2–4 m, ideal 2.50 m<br />
Detection levels: 7<br />
Switching zone: 420<br />
Light value:<br />
0.5 Lux up to daylight brightness,<br />
factory setting 7 Lux<br />
Protection class: IP 55<br />
ON time:<br />
adjustable from 2 sec.–30 min.<br />
factory setting 2 min.<br />
Pulse mode selectable: 1 sec. ON/9 sec. OFF<br />
<strong>Supply</strong> voltage:<br />
AC 230 V +/- 10%, 50/60 Hz<br />
Screw terminals: min. 1 mm 2 , max. 2 x 2.5 mm 2<br />
N (neutral) terminal for looping through<br />
Dissipation:<br />
approx. 1 W<br />
Relay device, neutral conductor necessary<br />
Switching capacity max.: µ 5 A<br />
Filament lamps:<br />
1000 W<br />
Fluorescent lamps (ballast): 8 x 58 W (uncompensated)<br />
Energy-saving lamps: 4 pieces<br />
Dimensions:<br />
L 180 x W 86 x D 74 mm<br />
15