PEHA Product Catalogue 2008 - US Ship Supply

PEHA Product Catalogue 2008 - US Ship Supply PEHA Product Catalogue 2008 - US Ship Supply

14.04.2014 Views

Electronic devices/Light management Article Designation Colour Packed Article No. Code No. R Flush-mounting dimmer and switch insert Triac base for ohmic and inductive loads, suitable for following upper parts: Button fixture xx.420.xx, 1 492 AN o.A. 370113 3 button fixture with LED xx.941/1.xx RÜ, infrared receive button xx.941.xx IR, serial pushbutton fixture xx.425.xx JR, Easywave radio receiver xx.440.xx FU-E, motion detector front plate 180° xx.410.xx BM (with parallel operation of max. 3 motion detectors). Settable by function selector switch with 8 functions: Touch dimmer with memory, touch dimmer with memory plus, adjustable brightness, touch dimmer without memory, pushbutton switch ON/OFF, staircase switch 2 sec.–60 min., long-time timer 30 min.–10 hours, programmable timer. Technical data: Forward phase controlled dimmer load rating R, L, supply voltage 230 V, 50 Hz, 2-lead connection, protection class IP 20, ancillary unit input for non-illuminated pushbutton switches, switched L. Switching capacity: filament lamps 230 V 60–600 W conventional (wound) transformers 50–500 VA Flush-mounting dimmer insert FET base for electronic NL transformers and ohmic loads, suitable for following upper parts: Button fixture xx.420.xx, 1 492 AB o.A. 389013 3 button fixture with LED xx.941/1.xx RÜ, infrared receive button xx.941.xx IR, serial pushbutton fixture xx.425.xx JR, Easywave radio receiver xx.440.xx FU-E, motion detector front plate 180° xx.410.xx BM (with 2-lead connection to electronic transformers, with parallel operation of max. 3 motion detectors), with 8 functions such as article no. 492 AN o.A. Technical data: Inverse phase controlled dimmer load rating R, C, supply voltage 230 V, 50 Hz, 2-lead connection, protection class IP 20, ancillary unit input for non-illuminated pushbutton switches, switched L. Switching capacity: filament lamps 230 V 60–525 W electronic transformers 60–525 VA Flush-mounting relay base Relay base for flush-mounting installation, suitable for following upper parts: 1 493 o.A. 370013 3 Button fixture xx.420.xx, button fixture with LED xx.941/1.xx RÜ, infrared receive button xx.941.xx IR, Easywave radio receiver xx.440.xx FU-E, motion detector front plate 180° xx.410.xx BM (with parallel operation of multiple motion detectors). Settable by function selector switch with 6 functions: Pushbutton switch ON/OFF, touch-impulse button, staircase switch 2 sec.–60 min., timer 2 sec.–60 min., long-time timer 30 min.–10 hours, programmable timer Technical data: Supply voltage 230 V, 50 Hz, 3-lead connection, neutral conductor necessary, protection class IP 20, ancillary unit input for non-illuminated pushbutton switches, switched L, approx. 3 electronic ballasts directly switchable (dependent on model). Note electronic ballast peak inrush current. When switching more a power relay must be used. Switching capacity: 1 relay output, µ 10 A, Filament lamps 230 V 2300 W High voltage halogen lamps 230 V 1500 W Transformers and inductive loads 600 VA Inrush current max. 80 A/20 ms Pushbutton ancillary unit for flush-mounting bases 492 AN, 492 AB and 493 o.A., 1 490 N o.A. 389113 3 only to be used in combination with button fixtures xx.420.xx. Mechanical pushbutton switches can also be used as ancillary units. Electronic devices/Light management Button fixture for touch dimmer and pushbutton switches 492 AN, 492 AB, relay 493 and ancillary unit 490 N STANDARD white 1 80.420 w 149713 3 arctic 1 80.420 Aw 127113 3 pure white 1 80.420.02 127213 3 DIALOG white 1 95.420.03 827213 3 pure white 1 95.420.02 802713 3 agate grey 1 95.420.13 766413 3 deep black 1 95.420.19 844513 3 As button fixture for illumination or indicator lamp cobalt blue 1 95.420.49 837213 3 the PHC pushbutton covers article no. xx.941/1 RÜ brown 1 95.420.26 776413 3 can be used. See page 27. aluminium 1 95.420.70 313513 3 As button fixture for infrared remote control AURA pure white 1 20.420.02 119113 3 the PHC pushbutton covers article no. xx.941.xx IR anthracite 1 20.420.21 132413 3 can be used. See page 35. aluminium 1 20.420.70 158713 3 13

Electronic devices/Light management Article Designation Colour Packed Article No. Code No. R Serial pushbutton fixture for touch dimmer and pushbutton switches 492 AN, 492 AB, relay 493 and ancillary unit 490 N STANDARD white 1 80.425 w 149513 3 pure white 1 80.425.02 128813 3 DIALOG pure white 1 95.425.02 806813 3 aluminium 1 95.425.70 314713 3 AURA pure white 1 20.425.02 131713 3 anthracite 1 20.425.21 131813 3 aluminium 1 20.425.70 131913 3 Speed regulator for fans and other devices with 1-phase induction motors with rotary 1 way switch single pole, non-resettable thermal 1 456 o.A. 210513 3 overload, with soft indexing, with clamp terminals, minimum speed adjustable, 230 V~, 50–60 Hz, for 1 motor 0.1–2.6 A (fuse T 4 A) Covers, STANDARD Page 60 Covers, DIALOG Page 79 Covers, AURA Page 93 Replacement fuses for electronic devices, safety fuses, dimensions 5 x 20 mm, rupture characteristics H = 1500 A, in compliance with IEC 127-2/V 1.6 AF for article no. 874 o.A. 10 16 AF 229413 3 T 1, 6 H, 250 V, for article no. 80.433 V, 434 o.A., 891-2 AS o.A., 482 o.A. and 940 SPV 10 16 AT 198813 3 2.0 AT for article no. 875 HA o.A. 10 20 AT 229113 3 2.5 AF for article no. 825 o.A. and 876 o.A. 10 25 AF 229613 3 T 2, 5 H, 250 V, for article no. 436 o.A. 10 25 AT 198913 3 T 4 H, 250 V, for article no. 435 HAN o.A., 456 o.A., 430 POT o.A. and 492 AN o.A. 10 40 AT 229813 3 T 5 H, 250 V, for article no. 438 HAN o.A., 439 M-AN REG and 439 SL-AN REG 10 50 AT 199013 3 6.3 AF for article no. 879 TR o.A. and 879 TRT o.A. 10 63 AF 229913 3 for use as replacement Fuse holder, plain 10 10 SH 198713 3 Universal dimmer 1000 W With 3 pushbutton inputs and 1–10 V interface, 1 439 UN REG 294913 3 dimmer with automatic load detection, for dimming electronic or wound transformers, with a filament lamp load of max. 50%, with 1000 W dimming output, can be used as master or slave (max. 30 slaves per master). Up to 7 different functions can be set via rotary switch: Touch dimmer with/without memory, staircase lighting with/without switch-off warning, light scenario control unit, 1–10 V control. Forward phase controlled dimmer Master 1000 W with 3 pushbutton inputs and 1–10 V interface, 1 439 M-AN REG 294613 3 for ohmic and inductive loads, with 1000 W dimming output and 2 slave outputs (1 forward phase controlled and 1 inverse phase controlled slave), for mounting on DIN rail, Up to 8 different functions can be set via rotary switch: Touch dimmer with/without memory, staircase lighting with/without switch-off warning, light scenario control unit, 1–10 V control, 108 mm wide (6 module widths), minimum load 60 W. Depending on the fuse, up to 4 slave units 439 SL-AN REG or 439 SL-AB REG can be controlled. The outputs of the Master and Slave units may not be connected in parallel. Forward phase controlled dimmer Slave 1000 W Dimmer module for forward phase controlled Slave, 1 439 SL-AN REG 294713 3 capacity extension for dimmer Master 439 M-AN REG, 1000 W dimming output and 1 slave output, for mounting on DIN rail, 108 mm wide (6 module widths), with memory function, minimum load 60 W. The outputs of the Master and Slave units may not be connected in parallel. Inverse phase controlled dimmer Master 1000 W with 3 pushbutton inputs and 1–10 V interface, 1 439 M-AB REG 298513 3 for ohmic loads and electronic transformers, with 1000 W dimming output and 2 slave outputs (1 forward phase controlled and 1 reverse phase controlled slave), for mounting on DIN rail, up to 8 different functions can be set via rotary switch: Touch dimmer with/without memory, staircase lighting with/without switch-off warning, light scenario control unit, 1–10 V control, 108 mm wide (6 module widths), minimum load 60 W. Depending on the fuse, up to 4 slave units 439 SL-AN REG or 439 SL-AB REG can be controlled. The outputs of the Master and reverse phase controlled Slave units may be connected in parallel. 14

Electronic devices/Light management<br />

Article Designation Colour Packed Article No. Code No. R<br />

Flush-mounting dimmer and switch insert<br />

Triac base for ohmic and inductive loads,<br />

suitable for following upper parts: Button fixture xx.420.xx, 1 492 AN o.A. 370113 3<br />

button fixture with LED xx.941/1.xx RÜ,<br />

infrared receive button xx.941.xx IR,<br />

serial pushbutton fixture xx.425.xx JR,<br />

Easywave radio receiver xx.440.xx FU-E,<br />

motion detector front plate 180° xx.410.xx BM (with parallel<br />

operation of max. 3 motion detectors).<br />

Settable by function selector switch with 8 functions:<br />

Touch dimmer with memory, touch dimmer with memory plus,<br />

adjustable brightness, touch dimmer without memory,<br />

pushbutton switch ON/OFF, staircase switch 2 sec.–60 min.,<br />

long-time timer 30 min.–10 hours, programmable timer.<br />

Technical data:<br />

Forward phase controlled dimmer load rating R, L,<br />

supply voltage 230 V, 50 Hz, 2-lead connection,<br />

protection class IP 20, ancillary unit input for non-illuminated<br />

pushbutton switches, switched L.<br />

Switching capacity: filament lamps 230 V<br />

60–600 W<br />

conventional (wound) transformers 50–500 VA<br />

Flush-mounting dimmer insert<br />

FET base for electronic NL transformers and ohmic loads,<br />

suitable for following upper parts: Button fixture xx.420.xx, 1 492 AB o.A. 389013 3<br />

button fixture with LED xx.941/1.xx RÜ, infrared receive button<br />

xx.941.xx IR, serial pushbutton fixture xx.425.xx JR,<br />

Easywave radio receiver xx.440.xx FU-E, motion detector front<br />

plate 180° xx.410.xx BM (with 2-lead connection to electronic<br />

transformers, with parallel operation of max. 3 motion detectors),<br />

with 8 functions such as article no. 492 AN o.A.<br />

Technical data:<br />

Inverse phase controlled dimmer load rating R, C,<br />

supply voltage 230 V, 50 Hz, 2-lead connection,<br />

protection class IP 20, ancillary unit input for non-illuminated<br />

pushbutton switches, switched L.<br />

Switching capacity: filament lamps 230 V 60–525 W<br />

electronic transformers 60–525 VA<br />

Flush-mounting relay base<br />

Relay base for flush-mounting installation,<br />

suitable for following upper parts: 1 493 o.A. 370013 3<br />

Button fixture xx.420.xx, button fixture with LED xx.941/1.xx RÜ,<br />

infrared receive button xx.941.xx IR,<br />

Easywave radio receiver xx.440.xx FU-E,<br />

motion detector front plate 180° xx.410.xx BM (with parallel<br />

operation of multiple motion detectors). Settable by function<br />

selector switch with 6 functions: Pushbutton switch ON/OFF,<br />

touch-impulse button, staircase switch 2 sec.–60 min.,<br />

timer 2 sec.–60 min., long-time timer 30 min.–10 hours,<br />

programmable timer<br />

Technical data:<br />

<strong>Supply</strong> voltage 230 V, 50 Hz, 3-lead connection,<br />

neutral conductor necessary, protection class IP 20, ancillary<br />

unit input for non-illuminated pushbutton switches, switched L,<br />

approx. 3 electronic ballasts directly switchable (dependent on<br />

model). Note electronic ballast peak inrush current. When switching<br />

more a power relay must be used.<br />

Switching capacity:<br />

1 relay output, µ 10 A,<br />

Filament lamps 230 V<br />

2300 W<br />

High voltage halogen lamps 230 V 1500 W<br />

Transformers and inductive loads 600 VA<br />

Inrush current max. 80 A/20 ms<br />

Pushbutton ancillary unit<br />

for flush-mounting bases 492 AN, 492 AB and 493 o.A., 1 490 N o.A. 389113 3<br />

only to be used in combination with button fixtures xx.420.xx.<br />

Mechanical pushbutton switches can also be used as ancillary units.<br />

Electronic<br />

devices/Light<br />

management<br />

Button fixture for touch dimmer and pushbutton switches<br />

492 AN, 492 AB, relay 493<br />

and ancillary unit 490 N STANDARD white 1 80.420 w 149713 3<br />

arctic 1 80.420 Aw 127113 3<br />

pure white 1 80.420.02 127213 3<br />

DIALOG white 1 95.420.03 827213 3<br />

pure white 1 95.420.02 802713 3<br />

agate grey 1 95.420.13 766413 3<br />

deep black 1 95.420.19 844513 3<br />

As button fixture for illumination or indicator lamp cobalt blue 1 95.420.49 837213 3<br />

the PHC pushbutton covers article no. xx.941/1 RÜ brown 1 95.420.26 776413 3<br />

can be used. See page 27. aluminium 1 95.420.70 313513 3<br />

As button fixture for infrared remote control AURA pure white 1 20.420.02 119113 3<br />

the PHC pushbutton covers article no. xx.941.xx IR anthracite 1 20.420.21 132413 3<br />

can be used. See page 35. aluminium 1 20.420.70 158713 3<br />

13

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!