Evolocity II Installation Guide.book - Abel Keogh

Safety Precautions
Antistatic Procedures
iv
Safety Precautions
Before unpacking, installing, wiring, or making connections to the Evolocity II cluster, the technician
responsible for these activities should become familiar with the precautions, warnings, and procedures outlined
in this guide.
Antistatic Procedures
To prevent Electrostatic Discharge (ESD), adhere to antistatic procedures at any time you are handling
sensitive electrical components:
• Wear an ESD antistatic smock to eliminate and prevent static buildup on clothes.
• Place an ESD wrist strap on your wrist and attach an alligator clip to the proper Earth ground location.
Electric Shock!
Use only grounding straps with internal resistors to ground yourself to the equipment. Low resistance
wires could cause electrocution or serious burns.
Electrical Safety
To avoid electrical shock and fire hazard, take the following precautions:
• Verify that the Alternating Current (AC) supply voltage and circuit breaker values are correct for the
Evolocity II hardware.
• Ensure that the rack is placed close enough to the power source that a power extension is not necessary.
• If a re-configuration of the power source is required, have it inspected and approved by a certified electrician
or electrical engineer.
• Securely fasten and route all cables in a safe and uncluttered manner.
Certifications
The Evolocity II product adheres to the European standards and regulations defined under European law and
carries the CE mark.
Evolocity II Installation Guide