Evolocity II Installation Guide.book - Abel Keogh
Evolocity II Installation Guide.book - Abel Keogh
Evolocity II Installation Guide.book - Abel Keogh
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Glossary<br />
Clusterworx Cluster management software from Linux Networx. Clusterworx allows administrators to<br />
control the cluster as a single system and provides secure remote monitoring and management capabilities.<br />
Clusterworx Master Host The Clusterworx Master Host is the host that controls the remaining hosts in a<br />
cluster (for large systems, multiple masters may be required). This host is reserved exclusively for managing the<br />
cluster and is not typically available to perform tasks assigned to the remaining hosts.<br />
ESD Electro-Static Discharge.<br />
<strong>Evolocity</strong> <strong>II</strong> A host packaging solution from Linux Networx. It sits vertically in a rack and uses an<br />
effective .8u of rack space.<br />
Host An individual server or computer within the cluster that operates in parallel with other hosts in the<br />
cluster. Hosts may contain multiple processors.<br />
Icebox An important piece of the Linux Networx cluster management solution, the Icebox is an architectureindependent<br />
hardware device that provides remote monitoring and advanced power control for hosts installed<br />
in your cluster. The Icebox can monitor up to four processors per host and is accurate to ± 1 degrees Celsius.<br />
The Icebox also contains advanced serial switching that allows administrators to maintain a redundant serial<br />
network.<br />
Node See Host.<br />
Rack Enclosure The rack used to hold <strong>Evolocity</strong> cluster hosts. Mounting rails used to hold hosts are 19<br />
inches apart.<br />
Serial Console port The Icebox port that connects to a remote computer via a serial connection. This is used<br />
to access the Command Line Interface (CLI) for Icebox management.<br />
Temperature/Reset ports Icebox ports that connect to the back of a corresponding host. These ports send<br />
temperature and host status information to the user and provide the ability to remotely reset and control<br />
beaconing for individual hosts.<br />
<strong>Evolocity</strong> <strong>II</strong> <strong>Installation</strong> <strong>Guide</strong>