Evolocity II Installation Guide.book - Abel Keogh
Evolocity II Installation Guide.book - Abel Keogh
Evolocity II Installation Guide.book - Abel Keogh
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Host <strong>Installation</strong> 9<br />
Host Placement<br />
Removing a Host<br />
Before removing a host from the rack, turn off power to the host and disconnect all cabling connected to the<br />
rear of the host. To remove a host from the rack enclosure, grip the bezel and lift the host until it clears the<br />
notch that holds it in place—then pull the host out from the cluster. As you slide the host out of the rack, use<br />
one hand along the bottom of the host for support.<br />
Warning!<br />
Hosts can weigh up to 25 lbs each. DO NOT drop hosts—damaged hosts may become inoperative.<br />
<strong>Evolocity</strong> <strong>II</strong> <strong>Installation</strong> <strong>Guide</strong>
Change language