Sam4s 650 pgm/user - SALOP CASH REGISTERS WEBSITE

CHECK #
Option Entry Description
DESC
Alpha
numeric
12 character
You can program a descriptor. The default descriptor is
CHKTRACK.
KEY DISABLE Y or N Select Y to disable this function.
COMPULSORY
FOR ALL SALES
OPENING CLERK
HAS EXCLUSIVE
ACCESS
PRINT ON
RECEIPT
PRINT ON
REMOTE
ALLOW ONLY ONE
CHK PER TABLE
CHECK #
ASSIGNED BY
REGISTER
DRIVE THRU
FEATURE
ENABLED
LENGTH OF
CHECK (0-9)
Y or N
Y or N
Y or N
Y or N
Select Y you must begin a new, or recall an existing tracking
number before registering items.
If Y, the clerk that begins a tracking number is the only clerk
who can recall a check. If N, any clerk can recall any check.
If N, the check track number and balance will not print on the
receipt.
If N, the check track number and balance will not print on the
remote.
Y or N If Y, you can begin only one check with the same table #.
Y or N
Y or N
If Y, press the CHECK. # key to automatically assign the next
sequential check. Check numbers will begin with #1 and
continue until the open check report is reset, at which point
the check number will be reset and start at #1 again.
If you wish to implement a drive thru recall key, this setting
changes the function of the PBAL key to that of a recall key.
Press the PBAL key directly to automatically recall the open
check with the lowest tracking number
Y or N Set the length of check in number of digits. For example, if 4,
then checks must be used in the range from 1000, to 9999.
This setting applies only to check numbers input by the
operator, not to check numbers assigned by the register.
YCR 94 ER-650