Sam4s 650 pgm/user - SALOP CASH REGISTERS WEBSITE

Refer to the table below to fill the fields of the GROUP PROGRAMMING
screens.
Press ENTER to return to the GROUP PROGRAMMING screen. Continue to
program groups as necessary. Press ESC to return to the PROGRAM MODE
screen.
Option Entry Description
DESC
Alpha
numeric
12 character
You can program a descriptor for each group. Type the
descriptor using the Program Overlay. The overlay is
automatically activated when the cursor is pointing at
the DESC field. The default descriptors are GROUP 1,
GROUP 2, etc.
ADD TO GROUP TOTAL Y or N Select N if you do not wish this groups total to be added
to the total of all groups on the Group report.
SEND TO KP Y or N Select Y if you wish to send PLUs reporting to this
group to a kitchen printer.
KP PORT # Y or N Select Y or N to direct items to a device attached to
port 1 or port 2. At R, select Y or N to print a kitchen
requisition at the register.
PRINT RED ON KP Y or N Select Y if you wish items reporting to this group to print
in red on the kitchen printer. (Note, the kitchen printer
must have red/black printing capability, and this option
does not apply to the register receipt printer.)
SEND TO KV Y or N Select Y if you wish items reporting to this group to
display at a kitchen video.
KV GROUP# 0-8 Select the kitchen video group to which PLUs in this
group are to be sent.
KV COLOR 0-8 The color code set here will control the color or screen
format displayed on an optional kitchen video system
requisition screen. Color codes vary by KVS system.
Refer to the documentation for your video system for
specific information.
YCR 53 ER-650