Sam4s 650 pgm/user - SALOP CASH REGISTERS WEBSITE

FUNCTION KEY ASSIGNMENT
Any key location may be reprogrammed with a function from the list of available functions. The
default program installs the functions as they are shown with the standard key legends.
To change the function on a specific key:
At the SM control lock position menu, press 6 for Key Assignment programming.
The KEY ASSIGNMENT screen displays:
KEY ASSIGNMENT
PUSH KEY TO BE
PROGRAMMED
0
Press any key location. The current key assignment is displayed:
KEY ASSIGNMENT
KEY NUMBER : 102
CURRENT ASSIGNMENT
CASH
ENTER NEW CODE,
PRESS ENTER
0
Enter a new key code from the list of "Function Key Codes" on the following
page and press ENTER, or press PAGE DOWN to display a list of key codes on
the screen.
FUNCTION KEYCODE
--------------------
NLU#1 - NLU#80(1-80)
ONE 81
TWO 82
THREE 83
FOUR 84
FIVE 85
With the key code list displayed, you can press PAGE DOWN repeatedly, or
PAGE UP until you find the key code you wish to use. Type the key code
number you wish to place and the screen returns to the KEY ASSIGNMENT
screen shown at step 2 above. Press ENTER. The KEY ASSIGNMENT screen
displays again:
YCR 33 ER-650