Sam4s 650 pgm/user - SALOP CASH REGISTERS WEBSITE

MEMORY ALLOCATION
NOTE: You must step through every memory allocation field to implement new memory
allocation. If you press CLEAR, at any field you will abort memory allocation processes
without making changes.
At the SM control lock position menu, press 5 for Memory Allocation
programming. The MEMORY ALLOCATION screen displays:
MEMORY ALLOCATION
TTL AVAIL: ??????
TTL USED: ??????
# PLUS 1000
# LEVELS (1-5) 1
# CLERKS 10
# GROUP TOTALS 20
The total available memory is displayed on the first line of the screen (TTL
AVAIL). The total memory currently allocated is displayed on the second line of
the screen (TTL USED). The TTL USED field is updated when you complete a
change and press ENTER.
Starting at the PLUs field, enter the quantity of each memory variable. Press
ENTER after each entry, and the cursor will move to the next variable. Page 2 of
Memory Allocation will display after the # OF GROUP TOTALS field is set:
MEMORY ALLOCATION
TTL AVAIL: ??????
TTL USED: ??????
# EJ LINES 0
# CHECKS 00
Y=HARD/N=SOFT CHK N
# LINES/SFT CHK 0
Continue filling each variable until complete. Press ENTER after setting the last
field, "# LINES/SOFT CH". The screen will display "ARE YOU SURE ?". N (No)
will display as the default answer to the question. If you wish to implement the
new allocation you have entered, press the YES/NO key, then press ENTER.
The message "PLEASE WAIT . . . . " displays until the printer prints either:
"MEMORY ALLOCATION OK !" or "MEMORY ALLOCATION SIZE OVER" if you
attempt to allocate features requiring more memory than is available.
The SERVICE MODE menu screen displays when memory allocation
programming is completed.
YCR 32 ER-650