Sam4s 650 pgm/user - SALOP CASH REGISTERS WEBSITE

3. When a report is selected, the X REPORT OPTIONS screen displays:
X REPORT OPTIONS
RPT#: FINANCIAL
1. TYPE 0
0:DAILY 1:PERIOD
2. 0:PRINT 1:DISP 0
3. IRC 0
0:STANDALONE
1:ALL 2:SELECT
Select the TYPE (DAILY or PERIOD), PRINT or DISPLAY, and the IRC
configuration. Refer to the explanations in the table below. Press ENTER after
each selection. After the last selection, the report will start.
If IRC is SELECT, then the register selection displays:
X REPORT OPTIONS
RPT#: FINANCIAL
1. TYPE 0
0:DAILY 1:PERIOD
2. 0:PRINT 1:DISP 0
3. IRC 2
# 1 2 3 4 5 6 7 8
YY N N N N N N
Press the YES/NO key at each register # to select whether you wish to include
each register in the consolidated report. Press ENTER after each selection.
After the last selection, the report will start.
Field
TYPE
IRC
Description
Select X1 or X2 if available for the selected report.
Select STANDALONE, ALL, or SELECT if available for
the selected report. If SELECT, the screen will prompt
for selection of registers - the screen will initially show
the registers available from the from/to IRC register
programming, for example if the IRC range is from 1 to
3, then the selection will default to:
1 2 3 4 5 6 7 8
Y Y Y N N N N N
OUTPUT
Select PRINT or DISPLAY output.
YCR 218 ER-650