Sam4s 650 pgm/user - SALOP CASH REGISTERS WEBSITE

CHECK TRACKING OPERATIONS
Important Note: Check tracking operations must take place on the same register. If an
IRC register system is implemented, you can not access the same checks from any
register within the system. You must open, add to, and/or pay the check at the same
register.
OVERVIEW
The ER-650 can employ a manual previous balance, hard check, or soft check system:
Options
If manual previous balance is selected, the check balance is not saved in
memory and is input manually by the operator (use the PBAL key).
If a hard check system is selected, only the previous balance is maintained in
memory.
If a soft check system is selected, the check detail is kept in memory until the
check is paid. (The maximum size of the soft check is set in memory allocation
programming.)
For hard or soft check operations, the following tracking options are available:
Tracking by manually entering the check number. (The number of digits in the
check number may be set from 0-9, with zero meaning no fixed length.)
Tracking by automatically assigning a check number. The starting check is
always #1.
Enforcing entry of a table number, where a check number is also assigned,
allows the check balance to be recalled by either the check or table number.
Multiple checks may be assigned at the same table. (If there are multiple checks
at the same table, an attempt to recall by table number will the check at the table
with the lowest number.)
For soft check operations, the following option is available:
Consolidation of like items can be selected for guest check printing. For
example, if three rounds of drinks are served, the check will print "3 TAP BEER"
rather than "1 TAP BEER" three times.
YCR 200 ER-650