Sam4s 650 pgm/user - SALOP CASH REGISTERS WEBSITE

CANCEL
The CANCEL key allows you to stop any transaction. Anything registered within the transaction
before the CANCEL key is pressed is automatically corrected. The CANCEL key can be
inactivated through programming, see "Function Key Programming".
Note: When a function is located on a function look up menu key, you access the function by
pressing the appropriate function look up key, then pressing the numeric digit corresponding to the
function you wish to select. On the default keyboard, the CANCEL function is function #1 on the
function look up 1 menu, so to use the CANCEL function, you would first press FUNCTION
LOOK#1, then press the numeric 1 key.
Register the items you wish to
sell.
Press the CANCEL key (or
access the CANCEL function
from the function look up
menu.)
CANCEL
THANK-YOU
CALL AGAIN
DATE 08/15/2000 SUN TIME 08:33
PLU1 T1 2.29
PLU2 -0.50
CANCEL *************************
CLERK 1 No.000011 00001
VOID POSITION OPERATIONS
You can use the VOID control lock position to correct any complete transaction. To correct any
transaction:
Turn the control lock to the
VOID position.
Enter the transaction you
wish to correct exactly as it
was entered originally in the
REG control lock position.
You can enter discounts,
voids, returns, tax exemptions
or any other function.
All totals and counters are
corrected as if the original
transaction did not take place.
THANK-YOU
CALL AGAIN
DATE 08/15/2000 SUN TIME 08:33
VOID MODE **********************
PLU1 T1 -2.29
PLU2 -1.00
TAX1 AMT -0.14
TOTAL -3.43
CASH -3.43
CLERK 1 No.000011 00001
YCR 180 ER-650