Sam4s 650 pgm/user - SALOP CASH REGISTERS WEBSITE

CLERK OPERATIONS
The number of clerks available is determined by memory allocation. See "Memory Allocation".
You can choose a push button or code entry clerk system:
The simplest clerk system is the push button system. This is also the default
system; the register will operate this way unless it is programmed otherwise.
You simply press the CLERK # key to sign on or sign off the clerk. You can
operate only one clerk when you choose this method.
You can provide maximum security in a multiple clerk system with the code entry
system. Enter the clerk secret code, then press the CLERK # key to sign on the
register.
You can sign off a clerk by entering 0, then press the CLERK # key.
You can also select stay down or pop-up mode for clerk operation:
Stay down means that once a clerk is signed on, the same clerk will remain
signed on until the clerk signs off. A stay down clerk system might be used
when only one operator uses the register at a time, and a different operator
begins when a work shift is changed.
Pop-up means that the clerk is automatically signed off at the end of each
transaction. Therefore, to begin a transaction, you must first sign a clerk on. A
pop-up clerk system might be used in a department store, where several clerks
might use the register during the same shift and clerk sales information is
required.
See "System Options" to set clerk options.
YCR 146 ER-650