Sam4s 650 pgm/user - SALOP CASH REGISTERS WEBSITE

CLERK REPORT
The Clerk Report selection from the LOGO DESC. PROGRAM screen allows you to
reprogram the descriptors that appear with the Clerk Report totals and counters.
For example, the first total on the clerk report "NET SALES" might be re-labeled to
say "GROSS SALES". You can reprogram any of the Financial Report totals listed
here with any 12 character descriptor.
From the LOGO DESC. PROGRAM screen, press 4 to display the CLERK REP
MESG. Screen:
CLERK REP MESG.
LINE 1 :
NET SALE
LINE 2 :
NONTAX
LINE 3 :
TAX1 SALES
The first 3 report descriptors (TTLs 1-3) display with the cursor arrow pointing at
the first message. Using the alpha numeric keyboard overlay, type the
descriptor. Each descriptor can be up to 12 characters. If you make a mistake,
press the BACKSPACE key to erase the previous character. After you have
completed typing the first descriptor, press ENTER to accept the new message
and advance to the TTL, or press ESC to return to the LOGO DESC.
PROGRAM screen without making any changes.
Press ENTER repeatedly, or press PAGE UP and/or PAGE DOWN to locate the
next descriptor you wish to program. After the last item on each screen, the
screen shifts to display the next 3 descriptors. (There are 52 Clerk Report
descriptors that you may program.) Using the same procedure, continue
programming each line as necessary. Press ESC at any time to exit and return
to the LOGO DESC. PROGRAM screen.
YCR 126 ER-650