Sam4s 650 pgm/user - SALOP CASH REGISTERS WEBSITE

FINANCIAL REPORT
The Financial Report selection from the LOGO DESC. PROGRAM screen allows
you to reprogram the descriptors that appear with the Financial Report totals and
counters. For example, the first total on the financial report "+PLU TTL" represents
the total of all positive PLU entries. You might wish to re-label this total to say
"FOOD SALES". You can reprogram any of the Financial Report totals listed here
with any 12 character descriptor.
From the LOGO DESC. PROGRAM screen, press 3 to display the FINANCIAL
REP MESG. Screen:
FINANCIAL REP MESG.
LINE 1 :
+PLU TTL
LINE 2 :
-PLU TTL
LINE 3 :
ADJST TTL
The first 3 report descriptors (TTLs 1-3) display with the cursor arrow pointing at
the first descriptor. Using the alpha numeric keyboard overlay, type the
descriptor. Each descriptor can be up to 12 characters. If you make a mistake,
press the BACKSPACE key to erase the previous character. After you have
completed typing the first descriptor, press ENTER to accept the new message
and advance to the TTL, or press ESC to return to the LOGO DESC.
PROGRAM screen without making any changes.
Press ENTER repeatedly, or press PAGE UP and/or PAGE DOWN to locate the
next descriptor you wish to program. After the last item on each screen, the
screen shifts to display the next 3 descriptors. (There are 73 Financial Report
descriptors that you may program.) Using the same procedure, continue
programming each line as necessary. Press ESC at any time to exit and return
to the LOGO DESC. PROGRAM screen.
YCR 125 ER-650