Operations Manual - TE 7-C Rotary Hammer Drill - Home Depot
Operations Manual - TE 7-C Rotary Hammer Drill - Home Depot
Operations Manual - TE 7-C Rotary Hammer Drill - Home Depot
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2.2 Chucks<br />
<strong>TE</strong>‐C CLICK chuck<br />
2.3 Switches<br />
Speed control switch for smooth starting.<br />
Function selector switch:<br />
<strong>Drill</strong>ing without hammering<br />
<strong>Hammer</strong> drilling<br />
Chisel adjustment (18 positions)<br />
Chiseling<br />
en<br />
2.4 Grips<br />
Vibration-absorbing, pivotable side handle with depth gauge<br />
Vibration-absorbing grip<br />
2.5 Protective feature<br />
Mechanical slip clutch<br />
2.6 Lubrication<br />
Oil lubrication<br />
2.7 Items supplied as standard<br />
1 Power tool<br />
1 <strong>TE</strong>‐C CLICK chuck<br />
1 Side handle with depth gauge<br />
1 Operating instructions<br />
1 Hilti toolbox<br />
1 Cleaning cloth<br />
1 Grease<br />
2.8 Using extension cords<br />
Use only extension cords of a type approved for the application and with conductors of adequate cross section.<br />
The power tool may otherwise loose performance and the extension cord may overheat. Check the extension<br />
cord for damage at regular intervals. Replace damaged extension cords.<br />
Recommended minimum conductor cross section and max. cable lengths<br />
Conductor cross section<br />
1.5 mm² 2.5 mm² 3.5 mm² 14 AWG 12 AWG<br />
Mains voltage 100V<br />
50 m<br />
Mains voltage 110- 30 m 50 m 100 ft 150 ft<br />
120 V<br />
Mains voltage 220-<br />
240 V<br />
75 m 100 m<br />
Do not use extension cords with 1.25 mm² or 16 AWG conductor cross sections.<br />
3