Pelco Esprit Series Camera Mounts - Signal Control Products, Inc.
Pelco Esprit Series Camera Mounts - Signal Control Products, Inc.
Pelco Esprit Series Camera Mounts - Signal Control Products, Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PRODUCT SPECIFICATION<br />
camera site<br />
<strong>Esprit</strong> ® <strong>Series</strong> <strong>Mounts</strong><br />
CORNER, PEDESTAL, POLE, AND WALL<br />
Product Features<br />
• Low Cost<br />
• For Use with <strong>Esprit</strong> ® <strong>Series</strong> Integrated Positioning Systems in Corner,<br />
Pedestal, Pole, and Wall Applications<br />
• Can Also Be Used in Parapet Applications When Used with<br />
Appropriate Mount Adapter<br />
• Constructed of Aluminum<br />
• Features Cable Feedthrough<br />
• Easy to Install<br />
• For Indoor or Outdoor Applications<br />
ESPRIT SYSTEM MOUNTED ON EWM WALL MOUNT<br />
WITH EPM POLE ADAPTER<br />
The <strong>Esprit</strong> ® <strong>Series</strong> mounts include the EWM wall mount, EPM pole<br />
mount, ECM100 corner mount, EPP pedestal adapter, and the EA4348<br />
EWM-to-Legacy ® adapter.<br />
All mounts are aluminum and feature a feedthrough opening to conceal<br />
electrical cables. They have a gray, polyester powder coat finish.<br />
EWM WALL MOUNT<br />
The EWM wall mount is the essential component in this series. It can<br />
be used as a stand-alone mount for wall applications or in conjunction<br />
with the EPM pole mount, ECM100 corner mount, or PP100 parapet<br />
mount. When used with the EA4348 adapter, the EWM can also be<br />
mounted to a Legacy PP300L, PP301L, or PP4348 parapet mount.<br />
The EWM wall mount is easy to install and requires no special tools.<br />
The <strong>Esprit</strong> integrated positioning system attaches directly to the EWM<br />
with three stainless-steel screws and washers. The mount can be<br />
attached to any vertical load-bearing surface with four fasteners<br />
suitable for the mounting surface (not supplied). Stainless-steel nuts<br />
and washers are supplied for attaching the EWM to the mounting studs<br />
on the pole, corner, and parapet mounts.<br />
The EPP pedestal adapter is designed to adapt an <strong>Esprit</strong> integrated<br />
positioning system to pedestal mounts, such as the PM2000 or<br />
PM2010. Three stainless-steel nuts and washers are provided to<br />
secure the <strong>Esprit</strong> system to the adapter.<br />
EPP PEDESTAL ADAPTER<br />
EPM POLE ADAPTER<br />
EA4348 LEGACY<br />
ADAPTER<br />
The EA4348 EWM-to-Legacy adapter can also be used to retrofit<br />
corner-, pole-, and parapet-mounted Legacy systems with <strong>Esprit</strong><br />
integrated positioning systems. The EA4348 will make any CM400,<br />
PA402, PP400, PP300L/PP301L, and PP4348 Legacy mount compatible<br />
with the EWM wall mount.<br />
ECM100 CORNER ADAPTER<br />
C238 / REVISED 1-06<br />
International Standards<br />
Organization Registered Firm;<br />
ISO 9001 Quality System
TECHNICAL SPECIFICATIONS<br />
MODELS<br />
ECM100<br />
EPP<br />
EPM<br />
EWM<br />
EA4348<br />
GENERAL<br />
Construction<br />
Finish<br />
Mounting Method<br />
ECM100<br />
EPP<br />
EPM<br />
EWM<br />
EA4348<br />
Cable Entry<br />
<strong>Esprit</strong> corner mount; for use with EWM wall<br />
mount<br />
<strong>Esprit</strong> pedestal adapter; for use with PM2000/<br />
PM2010 pedestal mount<br />
<strong>Esprit</strong> pole adapter; for use with EWM wall<br />
mount<br />
<strong>Esprit</strong> wall mount<br />
EWM-to-Legacy adapter; for use with PP300L,<br />
PP301L, and PP4348 parapet mounts<br />
Aluminum<br />
Gray polyester powder coat<br />
Attached to mounting surface with eight<br />
fasteners (not supplied)<br />
Attached to a compatible mount (such as the<br />
PM2000/PM2010) with four fasteners<br />
(not supplied)<br />
Attached to a pole with three stainless-steel<br />
straps (supplied). Straps fit 3-inch (7.62 cm) to<br />
8-inch (20.32 cm) diameter pole.<br />
Attached to the mounting surface with four<br />
fasteners (not supplied)<br />
Attached to Legacy corner, pole, or parapet<br />
mount with four fasteners (nuts and split lock<br />
washers supplied with Legacy mount)<br />
Cable feeds through the EWM mount into the<br />
<strong>Esprit</strong> system; ECM100, EPA, and EPM mounts<br />
have a cable feedthrough hole in center<br />
Maximum Load<br />
EPP<br />
Not applicable<br />
ECM100<br />
75 pounds (34 kg)<br />
EPM<br />
100 pounds (45 kg)<br />
EWM<br />
30 pounds (14 kg)<br />
EWM with EA4348 30 pounds (14 kg)<br />
Weight Unit Shipping<br />
EPP 0.6 lb (0.3 kg) 1.0 lb (0.45 kg)<br />
ECM100 3.0 lb (1.4 kg) 6.0 lb (2.7 kg)<br />
EPM 2.2 lb (1.0 kg) 4.0 lb (1.8 kg)<br />
EWM 1.5 lb (0.7 kg) 3.0 lb (1.4 kg)<br />
EA4348 1.2 lb (0.5 kg) 3.0 lb (1.4 kg)<br />
OPTIONAL MOUNT ADAPTERS<br />
PP100<br />
Parapet (wall) mount. Use with EWM wall mount<br />
PP300L, PP301L<br />
Parapet (corner) mount. Use with EWM wall<br />
mount and EA4348 adapter<br />
PP4348<br />
Parapet (rooftop) mount. Use with EWM wall<br />
mount and EA4348 adapter<br />
2.75<br />
(6.99)<br />
EWM<br />
DIMENSION<br />
DRAWING<br />
EPP<br />
DIMENSION<br />
DRAWING<br />
14.55<br />
(36.96)<br />
0.8 X 0.375<br />
(2.03 X 0.95)<br />
Ø 0.150 (0.381) 3X<br />
3.00 (7.62) B.C.<br />
EPM<br />
DIMENSION<br />
DRAWING<br />
2.46<br />
(6.25)<br />
Ø 3.00<br />
(7.62)<br />
9.75 (24.76)<br />
4.88 (12.39)<br />
2X 3.25<br />
(8.25)<br />
4.75<br />
(12.06)<br />
1.0 X 0.375<br />
(2.54 X 0.95)<br />
8.00<br />
(20.32)<br />
4.75<br />
(12.06)<br />
6.00<br />
(15.24)<br />
5.50<br />
(13.97)<br />
0.25<br />
(0.64)<br />
1.50<br />
(3.81)<br />
7.00<br />
(17.78)<br />
3.58<br />
(9.09)<br />
8.00<br />
(20.32)<br />
2.00 (5.08)<br />
2X 2.375<br />
(6.03)<br />
6.00<br />
(15.24)<br />
2X 2.25<br />
(5.71)<br />
2X 2.375<br />
(6.03)<br />
3.08<br />
(7.82)<br />
4.75<br />
(12.07)<br />
6.15<br />
(15.62)<br />
4X Ø0.312 (0.79) HOLE<br />
FOR ZHO3-1107-1705<br />
Ø3.00<br />
Ø0.37 (0.94), 8X<br />
0.60 (1.52)<br />
4X Ø0.343 (0.87)<br />
Ø2.00 (5.08)<br />
ECM100 DIMENSION DRAWING<br />
EA4348 DIMENSION DRAWING<br />
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.<br />
<strong>Pelco</strong> Worldwide Headquarters:<br />
3500 <strong>Pelco</strong> Way, Clovis, California 93612-5699 USA<br />
USA & Canada Tel: (800) 289-9100 • FAX (800) 289-9150<br />
International Tel: (559) 292-1981 • FAX (559) 348-1120<br />
www.pelco.com<br />
<strong>Pelco</strong>, the <strong>Pelco</strong> logo, <strong>Esprit</strong>, and Legacy are registered trademarks of <strong>Pelco</strong>.<br />
Specifications subject to change without notice.<br />
©Copyright 2006, <strong>Pelco</strong>. All rights reserved.