CATALYTIC REFORMING Process,Catalysts and Reactors
CATALYTIC REFORMING Process,Catalysts and Reactors
CATALYTIC REFORMING Process,Catalysts and Reactors
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Feed quality Chemical composition<br />
• Characterization of the feedstocks by:<br />
• With a higher 0.85 N + A<br />
– The same Octane content will be obtained at a lower severity<br />
(temperature) <strong>and</strong> the product yield will be higher<br />
– Or for the same severity (temperature), the Octane content will be<br />
higher<br />
– Higher naphtenic content. The T<br />
endothermic reaction heat is<br />
increased <strong>and</strong> the feed flow rate will be limited by the heater design<br />
duty<br />
• With lower 0.85 N + A<br />
– Higher paraffin content. The hydrogen purity of the recycle gas<br />
decreases <strong>and</strong> operation will be limited by the recycle compressor<br />
capacity<br />
• Impurities<br />
0.85 N + A<br />
– Temporary or permanent reduction of catalyst activity by poisons<br />
contained in the feed<br />
Catalytic Reforming<br />
55