information booklet - Parchem
information booklet - Parchem
information booklet - Parchem
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
TECHNICAL INFORMATION<br />
Fix design load heading here<br />
Limit State Design Tension Load<br />
(Bond/ Concrete Capacity)<br />
80<br />
75<br />
70<br />
65<br />
60<br />
55<br />
50<br />
45<br />
40<br />
35<br />
30<br />
25<br />
20<br />
15<br />
10<br />
5<br />
0<br />
M8 M10 M12 M16 M20<br />
Depth (mm) 80 90 110 125 170<br />
AC100e /<br />
KF2<br />
8.8 11.8 17.1 28.6 44.5<br />
ChemSet Injection 101 8.2 10.8 15.5 24.2 45.4<br />
Fix reference to opposition manuals here<br />
Fix Powers<br />
Image Here<br />
Fix Product<br />
name KF2 here<br />
v<br />
Fix opposition<br />
Ramset<br />
Product name<br />
here<br />
101<br />
Doc # Comp 0005<br />
Date: 27 th April 2010<br />
Limit State<br />
Fix<br />
Design<br />
design load<br />
Tension<br />
here (kN)<br />
Load (kN)<br />
In Concrete<br />
Note: Information has been extracted f<br />
rom Ramset Specifiers Resource Book 2006, page 134<br />
The <strong>information</strong> is extracted from different manufacturer's catalogues<br />
for GENERAL PURPOSE COMPARISON. It is strongly recommended<br />
to refer to the relevant technical manual/catalogue for complete<br />
product <strong>information</strong> for design of anchors and before using the product<br />
for a particular application. The load values in this chart are bond /<br />
concrete strength capacities for single anchors without spacing and /<br />
or edge distance restrictions. The steel capacity of the anchor should<br />
be checked and the anchor should be loaded with in the steel and<br />
bond/concrete strength capacity.<br />
NOTE: Information has been extracted from HILTI Australia Fastening Technology Manual Issue 2007, page 72. Ramset Specifiers Resource Book<br />
2006, page 118 and Fischer Fixing Systems Technical Handbook 06/2004, Page 222.<br />
Note<br />
The <strong>information</strong> is extracted from different manufacturer’s catalogues for GENERAL PURPOSE COMPARISON. It is strongly recommended to refer<br />
to the relevant technical manual/catalogue for complete product <strong>information</strong> for design of anchors and before using the product for a particular<br />
application. The load values in this chart are bond/concrete strength capacities for single anchors without spacing and/or edge distance restrictions.<br />
The steel capacity of the anchor should be checked and the anchor should be loaded with in the steel and bond/concrete strength capacity.<br />
Powers Fasteners Technical Information Booklet I 98