information booklet - Parchem
information booklet - Parchem
information booklet - Parchem
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Technical <strong>information</strong><br />
Fix Powers<br />
Image Here<br />
Fix Product<br />
PFPRO<br />
name here<br />
v<br />
Hilti Hit Re500<br />
V<br />
Ramset<br />
REO 502<br />
V<br />
Note<br />
Limit State<br />
Fix design<br />
Design<br />
load heading here<br />
Tension Load<br />
(Bond/ Concrete Capacity)<br />
Fisher FIS EM<br />
Doc # Comp 0001<br />
140<br />
130<br />
120<br />
110<br />
100<br />
90<br />
80<br />
70<br />
60<br />
50<br />
40<br />
30<br />
20<br />
10<br />
0<br />
Date: 12 th April 2010<br />
In Concrete<br />
Limit State Design Tension Load (kN)<br />
Depth (mm) 80 90 110 125 170 210<br />
PFPRO 17 25 40.8 57.8 98.3 139.2<br />
HIT-RE 500 with HAS 14.3 19.1 27.4 39.9 72.3 104.2<br />
Rod<br />
ChemSet Reo 502 11.4 23.5 34.2 54.7 77.4 96.5<br />
FIS EM 9.8 13.8 20.2 30.7 52.2 77.3<br />
NOTE: Information has been extracted from HILTI Australia Fastening Technology Manual Issue 2007, page 72. Ramset Specifiers Resource Book<br />
2006, page 118 and Fischer Fixing Systems Technical Handbook 06/2004, Page 222.<br />
The <strong>information</strong> is extracted from different manufacturer’s catalogues for GENERAL PURPOSE COMPARISON. It is strongly recommended to refer<br />
to the relevant technical manual/catalogue for complete product <strong>information</strong> for design of anchors and before using the product for a particular<br />
application. The load values in this chart are bond/concrete strength capacities for single anchors without spacing and/or edge distance restrictions.<br />
The steel capacity of the anchor should be checked and the anchor should be loaded with in the steel and bond/concrete strength capacity.<br />
M8 M10 M12 M16 M20 M24<br />
be checked and the anchor should be loaded with in the steel and<br />
bond/concrete strength capacity.<br />
The <strong>information</strong> is extracted from different manufacturer's catalogues<br />
for GENERAL PURPOSE COMPARISON. It is strongly recommended<br />
to refer to the relevant technical manual/catalogue for complete<br />
product <strong>information</strong> for design of anchors and before using the product<br />
for a particular application. The load values in this chart are bond /<br />
concrete strength capacities for single anchors without spacing and /<br />
or edge distance restrictions. The steel capacity of the anchor should<br />
Note: Information has been extracted from HILTI Australia Fastening Technology Manual Issue 2007, page 72, Ramset<br />
Specifiers Resource Book 2006, page 118 and Fischer Fixing Systems Technical Handbook 06/2004, Page 222<br />
Powers Fasteners Technical Information Booklet I 54