information booklet - Parchem
information booklet - Parchem
information booklet - Parchem
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Powers Fasteners<br />
Note<br />
Limit State<br />
Fix design load<br />
Design<br />
heading here<br />
Tension Load<br />
(Bond/ Concrete Capacity in 32MPa Concrete)<br />
Fix Powers<br />
Image Here<br />
V12<br />
125.0kN<br />
vs<br />
Hilti<br />
HVU Capsule with<br />
HAS rod<br />
100.0kN<br />
Doc # Comp 0017<br />
75.0kN<br />
50.0kN<br />
Date: 21 st April 2011<br />
In 32MPa Concrete<br />
25.0kN<br />
Limit State Design Tension Load (kN)<br />
The <strong>information</strong> is extracted from different manufacturer's catalogues<br />
for GENERAL PURPOSE COMPARISON. It is strongly recommended<br />
to refer to the relevant technical manual/catalogue for complete<br />
product <strong>information</strong> for design of anchors and before using the product<br />
for a particular application. The load values in this chart are bond /<br />
concrete strength capacities for single anchors without spacing and /<br />
or edge distance restrictions. The steel capacity of the anchor should<br />
be checked and the anchor should be loaded with in the steel and<br />
bond/concrete strength capacity.<br />
NOTE: Information has been extracted from HILTI Australia Fastening Technology Manual Issue 2007, page<br />
72. Ramset Specifiers Resource Book 2006, page 118 and Fischer Fixing Systems Technical Handbook<br />
06/2004, Page 222.<br />
The <strong>information</strong> is extracted from different manufacturer’s catalogues for GENERAL PURPOSE<br />
COMPARISON. It is strongly recommended to refer to the relevant technical manual/catalogue for complete<br />
product <strong>information</strong> for design of anchors and before using the product for a particular application. The load<br />
values in this chart are bond/concrete strength capacities for single anchors without spacing and/or edge<br />
distance restrictions. The steel capacity of the anchor should be checked and the anchor should be loaded<br />
with in the steel and bond/concrete strength capacity.<br />
0.0kN<br />
M8 M10 M12 M16 M20 M24<br />
Depth (mm) 80 90 110 125 170 210<br />
V12 12.6 21.3 31.3 47.4 80.6 109.5<br />
HILTI HVU with HAS rod 14.3 19.1 27.4 39.9 72.3 104.2<br />
Note: Information has been extracted from HILTI Fastening Technology Manual Issue 2007, page 54 and Powers Fasteners’ technical manual on V12.<br />
22 I <strong>Parchem</strong> Construction Supplies Pty Ltd (ABN 80 069 961 968)