information booklet - Parchem
information booklet - Parchem
information booklet - Parchem
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Powers Fasteners<br />
Fix Powers<br />
Image Here<br />
PFPRO<br />
v<br />
Fix opposition<br />
Ramset<br />
Product name<br />
here<br />
Chemset<br />
REO 502<br />
V<br />
Ramset<br />
Chemset<br />
801<br />
Doc # Comp 0014<br />
Working Stress<br />
Fix design load<br />
Design<br />
heading here<br />
Tension Load<br />
Note<br />
(Bond/ Concrete Capacity)<br />
Date: 10 Feb 2011<br />
150<br />
140<br />
130<br />
120<br />
110<br />
100<br />
90<br />
80<br />
70<br />
60<br />
50<br />
40<br />
30<br />
20<br />
10<br />
0<br />
in 32MPa Concrete<br />
Working Stress Fix design Design load here Tension (kN) Load<br />
(kN)<br />
The <strong>information</strong> is extracted from different manufacturer's catalogues<br />
for GENERAL PURPOSE COMPARISON. It is strongly recommended<br />
to refer to the relevant technical manual/catalogue for complete<br />
product <strong>information</strong> for design of anchors and before using the product<br />
for a particular application. The load values in this chart are bond /<br />
concrete strength capacities for single anchors without spacing and /<br />
or edge distance restrictions. The steel capacity of the anchor should<br />
be checked and the anchor should be loaded with in the steel and<br />
bond/concrete strength capacity.<br />
NOTE: Information has been extracted from HILTI Australia Fastening Technology Manual Issue 2007, page 72. Ramset Specifiers Resource Book<br />
2006, page 118 and Fischer Fixing Systems Technical Handbook 06/2004, Page 222.<br />
The <strong>information</strong> is extracted from different manufacturer’s catalogues for GENERAL PURPOSE COMPARISON. It is strongly recommended to refer<br />
to the relevant technical manual/catalogue for complete product <strong>information</strong> for design of anchors and before using the product for a particular<br />
application. The load values in this chart are bond/concrete strength capacities for single anchors without spacing and/or edge distance restrictions.<br />
The steel capacity of the anchor should be checked and the anchor should be loaded with in the steel and bond/concrete strength capacity.<br />
M8 M10 M12 M16 M20 M24 M30<br />
Depth (mm) 80 90 110 125 170 210 270<br />
PFPRO 9.4 13.8 22.6 32.1 54.6 77.3 113.1<br />
ChemSet Reo 502 6.3 10.3* 15.3* 29.4* 43.0 53.6 72.4<br />
ChemSet Injection 801 6.5* 9.9 14.4 19.6 33.9 50.1<br />
Note: Information has been extracted from Ramset Anchoring and Chemicals Product Catalogue 2010 pages 87 and 89.<br />
*Capacities marked with “*” are limited by steel strength as per published <strong>information</strong> by Ramset. Please check capacity of steel used for anchors as the above<br />
capacities for PFPRO are bond/concrete capacities.<br />
18 19 I <strong>Parchem</strong> Construction Supplies Pty Ltd (ABN 80 069 961 968)