information booklet - Parchem
information booklet - Parchem
information booklet - Parchem
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
TECHNICAL INFORMATION<br />
70.0<br />
60.0<br />
Fix Powers<br />
Image Here<br />
Vs<br />
Hilti HIT-HY 150<br />
Vs<br />
Note<br />
Working<br />
Fix<br />
Stress<br />
design load heading<br />
Design<br />
here<br />
Tension Load<br />
Ramset<br />
Structaset 401<br />
(Bond/ Concrete Capacity in 32MPa Concrete)<br />
V12<br />
Vs<br />
Ramset<br />
Chemset 101<br />
Doc # Comp 0012<br />
Date: 04 th Feb 2010<br />
50.0<br />
40.0<br />
30.0<br />
Tension Load (kN)<br />
20.0<br />
Working Stress Design<br />
10.0<br />
0.0<br />
M8 M10 M12 M16 M20 M24<br />
The <strong>information</strong> is extracted from different manufacturer's catalogues<br />
for GENERAL PURPOSE COMPARISON. It is strongly recommended<br />
to refer to the relevant technical manual/catalogue for complete<br />
product <strong>information</strong> for design of anchors and before using the product<br />
for a particular application. The load values in this chart are bond /<br />
concrete strength capacities for single anchors without spacing and /<br />
or edge distance restrictions. The steel capacity of the anchor should<br />
be checked and the anchor should be loaded with in the steel and<br />
bond/concrete strength capacity.<br />
NOTE: Information has been extracted from HILTI Australia Fastening Technology Manual Issue 2007, page 72. Ramset Specifiers Resource Book<br />
2006, page 118 and Fischer Fixing Systems Technical Handbook 06/2004, Page 222.<br />
The <strong>information</strong> is extracted from different manufacturer’s catalogues for GENERAL PURPOSE COMPARISON. It is strongly recommended to refer<br />
to the relevant technical manual/catalogue for complete product <strong>information</strong> for design of anchors and before using the product for a particular<br />
application. The load values in this chart are bond/concrete strength capacities for single anchors without spacing and/or edge distance restrictions.<br />
The steel capacity of the anchor should be checked and the anchor should be loaded with in the steel and bond/concrete strength capacity.<br />
Depth (mm) 80 90 110 125 170 210<br />
V12 7.0 11.9 17.4 26.3 44.8 60.8<br />
Structaset 401 6.5 10.1 15.3 20.8 27.7 43.3<br />
HIT-HY 150 6.9 9.2 13.8 17.6 29.9 37.3<br />
Chemset 101 4.5 6.0 8.6 13.5 25.2 42.9<br />
Note: Information has been extracted from Ramset Specifiers Resource Book 2006 and Structaset401 manual downloaded from<br />
internet, HILTI Fastening Technology Manual 2007 (p81 & 86).<br />
Powers Fasteners Technical Information Booklet I 17 16
Change language