PDF Price list JORDAHL Pricelist 2013 - J & P â Bautechnik ...

CONNECTION SYSTEMS 

SHEAR 

REINFORCEMENT SYSTEMS 

SHEAR 

CONNECTOR SYSTEMS 

FACADE 


MOUNTING TECHNOLOGY 

Our 2013 Price List. 

A whole host of good reasons to choose quality 

and customer focus. 

Valid from February 2013 

anchored in quality


SHEAR 


SHEAR 


FACADE 



Quality since 1907. 

JORDAHL‘s registered office and administrative headquarters in the premises of its affiliate PUK 

JORDAHL – The Company 

JORDAHL connects: concrete, steel, heavy loads and 

a whole lot more. And of course numerous customers 

around the world who have already decided for highquality 

and individual products from fastening, reinforcement 

and shear connection, mounting technology 

and facade connection systems. Customers who choose 

JORDAHL want more – higher quality, broader choice, 

better technical advice, wider experience. And they get 

all of this from us. 

Since our company was founded in Berlin in 1907 we 

have been at the forefront of connection and shear reinforcement 

systems development. 

JORDAHL products such as anchor channels have become 

milestones in the evolution of structural engineering 

and have brought lasting changes to construction, 

shaping the way buildings are designed and making 

them safer, not just in Germany. 

The JORDAHL Seal 

JORDAHL has over 100 years of unique experience in the 

market. And this experience forms the basis for our competence 

and high standards. Whether high-quality products, 

service or consulting – we aim to do everything 

for our customers to the same demanding standard of 

excellence. That is what the JORDAHL seal stands for. It 

is a guarantee of quality for our customers and also the 

standard that we strive to adhere to each and every day. 

100 YEARS OF 

ANCHOR CHANNELS 

100 YEARS 

OF QUALITY 

The sign of excellent JORDAHL ® Quality. 

The JORDAHL Cover Picture 

JORDAHL products make so much possible. Including 

the new headquarters of the church-related Evangelisches 

Werk für Diakonie und Entwicklung. 

The building is located on the corner of Caroline-Michaelis-Strasse 

and Invalidenstrasse in the Berlin-Mitte 

district and offers space for up to 700 employees, conference 

rooms, prayer rooms, a cafeteria and shops. The 

building was designed by architects KSP Jürgen Engel 

in accordance with the DGNB principles for sustainable 

construction. The annual primary energy requirement 

will be reduced to under 70 kilowatt hours per square 

metre thanks to energy-efficient operations. 

This aim is naturally supported by reliable, high-quality 

JORDAHL ® JTA W and JTA K anchor channels. 

New headquarters of the Evangelisches Werk für Diakonie und Entwicklung, 

Berlin 

2 © JORDAHL | Price List 2013 | 01-2013 | www.jordahl.de

Contents 

Connection Systems 

JORDAHL ® Anchor Channels 

Anchor Channels JTA 4 – 7 

Toothed Anchor Channels JXA 8 

Toothed Anchor Channels JXA-PC 9 

Toothed Anchor Channels JZA 10 

Loop Channels JSA 10 

Pricing 11 

Profiled Metal Sheet Channels JTB 12 

Railing Fastening JGB 13 

Brackets JK 14 

Edge Protection Angle JKW 14 

Curved Channels JTA / JXA/JM/JXM 15 

JORDAHL ® Bolts & Accessories 

Bolts 16 – 21 

Locking Plates JGM, JAM 22 

Accessories 22 – 24 

Toothed Straps JVB 25 

End Anchor Type JE 25 

Clamping Plates KP-A, KP, SKU 26 

Frame Shoes JG 27 

Brick Ties 28 – 29 

Shear Reinforcement Systems 

JORDAHL ® Studrails JDA 30 – 31 

JORDAHL ® Shear reinforcement JDA-S 30 – 31 

Shear Connector Systems 

JORDAHL ® Double Shear Connectors 

JDSD, JDSDQ 32 – 33 

Fire Protection Collar JBRM, JBRMQ 32 – 33 

Facade Connection Systems 

JORDAHL ® Brickwork Support Systems 

Brickwork Support Brackets JVA+ 34 – 36 

Angled Bracket JW 34 

Suspension Loop JRH 35 

Stainless Steel Wire ESD 35 

Prefabricated Part Holder JFT 36 

Angled Support Brackets L-DF+, L-DN+ and L-F+ 36 

Threaded Loops JGS 36 

Grout-in Brackets JMK+ 37 

Accessories 37 – 38 

Attic Brick Anchors JAV 37 

Scaffold Anchor JGA 38 

Cavity Wall Ties 39 

Mounting Technology 

JORDAHL ® Mounting Channels 

Mounting Channels JM W 40 

Toothed Mounting Channels JXM W 40 

Framing Channels JM K 41 – 42 

Toothed Mounting Channels JZM K 42 

Slotted Back Channels JML K 43 

Toothed Slotted Back Channels JZML K 43 

Service 44 

Advice 45 

Terms of Delivery and Payment 46 

Index 47 

All rights reserved. 

Source cover picture: HOCHTIEF Projektentwicklung GmbH; 

Photo by: Markus Bachmann 

We reserve the right to make revisions within the framework of 

product and application related development. 

Subject to printing errors or mistakes. 

JORDAHL GmbH 

Nobelstr. 51 

12057 Berlin, Germany 

www.jordahl.de 

© JORDAHL | Price List 2013 | 01-2013 | www.jordahl.de 3


SHEAR 


SHEAR 


FACADE 



Anchor Channels 

JTA ETA (European Technical Approval ETA 09/0338) 

ABZ (General Technical Approval Z-21.4-151) 

Profile JTA W 72/48 JTA W 74/48 JTA K 72/48 JTA W 55/42 JTA W 54/43 

Associated Bolts JA M 20–M 30 JA M 20–M 30 JB M 10–M 20, JE M 24 1) 

Round Anchor 

I-Anchor 

195 

195 

190 

5 

6 

33 48 

48 

33 

26 42 

15.5 

10 

12.9 

72 

72 

55 

Number of €/Piece Number of €/Piece Number of €/Piece 

Channel Length 

Anchors 

Anchors 

Anchors 

[mm] 

Material Material Material 

ETA ABZ hdg A4 ETA ABZ hdg A4 ETA ABZ hdg 

150 2 2 28.20 115.10 2 2 26.80 72.05 2 2 20.85 

200 2 2 31.25 137.90 2 2 29.65 86.35 2 2 23.85 

250 2 2 34.50 160.65 2 2 32.80 100.85 2 2 26.45 

300 2 2 37.95 183.75 2 2 36.25 115.35 2 2 29.45 

350 2 3 48.90 216.45 2 3 46.35 132.65 2 3 37.35 

400 3 3 52.20 239.00 3 3 49.60 152.85 3 3 40.20 

550 3 3 65.00 307.05 3 3 59.35 197.65 3 3 48.65 

800 4 4 90.90 431.60 4 4 85.30 275.20 4 4 67.75 

1050 5 5 116.65 555.25 5 5 111.15 360.55 5 5 87.05 

3000 11 13 331.15 1463.90 11 13 315.35 1082.05 11 13 250.75 

6000 21 25 630.30 2787.90 21 25 600.60 2060.70 21 25 477.90 

Price per Metre/lfd. m 3,5/m 4/m 105.05 464.65 3.5/m 4/m 100.10 343.45 3.5/m 4/m 79.65 

Weight [kg/m] 9.80 9.85 9.05 9.15 7.70 7.90 

Standard Fixed 

Length Surcharge 

1) 

JE M 24 is equivalent to JB M 24. 

[10%] [10%] [10%] [10%] [10%] 

5 

■ All prices incl. foamfilling and nailholes 

■ Stock length = 6,000 mm (-0/+50 mm) 

■ Anchor distance 25–35 mm 

■ Fixed length: 1,050 mm < L < 6,000 mm 

■ Calculation example for standard and special fixed 

length: see page 11. 

■Special fixed length: 20 % special fixed length 

surcharge (increased production costs). 

Anchor Type: 

■ Round anchor = standard version 

■ I-anchor = delivery subject to confirmation except for 

W 72/48 (74/48) and W 53/34; I-anchor standard 

version 

■ Weight per metre for mill finish version (for galvanized 

profiles: weigth per metre; +10 %) (average anchor 

weight) 


100 YEARS OF 

ANCHOR CHANNELS 

100 YEARS 

OF QUALITY 

Profile JTA W 53/34 JTA K 53/34 JTA W 50/30 

Associated Bolts JB M 10–M 20 JB M 10–M 20 JB M 10–M 20 

Round Anchor 

I-Anchor 

165 

165 

4 

4.5 

2.75 

100 

10.5 

22 

34 

34 

22 

22 

30 

8 

7.9 

53 

53 

50 


Channel Length Anchors Material Anchors Material Anchors Material 

[mm] 

ETA ABZ hdg A4 ETA ABZ hdg A4 ETA ABZ hdg A4 

150 2 2 17.95 57.30 2 2 16.95 46.95 2 2 12.50 40.45 

200 2 2 20.25 69.80 2 2 19.30 57.50 2 2 14.00 50.05 

250 2 2 22.70 82.15 2 2 21.50 66.90 2 2 15.65 59.95 

300 2 2 24.95 94.40 2 2 23.85 78.05 2 2 17.25 69.35 

350 3 3 31.50 112.90 3 3 29.95 94.65 3 3 21.50 83.15 

400 3 3 33.95 125.45 3 3 32.20 105.50 3 3 23.05 92.50 

550 3 3 42.00 162.00 3 3 37.55 135.90 3 3 27.50 120.75 

800 4 4 58.65 229.85 4 4 54.50 188.80 4 4 38.40 172.60 

1050 5 5 75.30 298.05 5 5 71.45 250.95 5 5 48.80 224.60 

3000 13 13 210.30 872.80 13 13 169.15 587.30 13 13 127.40 639.65 

6000 25 25 401.10 1662.30 25 25 322.50 1118.40 25 25 242.40 1218.30 

Price per Metre/lfd. m 4/m 66.85 277.05 4/m 53.75 186.40 4/m 40.40 203.05 

Weight [kg/m] 5.60 5.10 3.45 



[10%] [10%] [10%] [10%] [10%] [10%] 

Material and design 

■ hdg = hot-dip galvanized 1.0038/1.0044 

■ A4 = stainless steel 1.4401/1.4404/1.4571 

■ W 

■ K 

= hot rolled 

= cold formed 

Ordering Example Anchor Channels Short Piece 

Type 

Profile- 

Size 

Channel 

Length 

Anchor Material 

ETA- 

Compliant 

ETA JTA W 50/30 – 250 – 2A – hdg – CE 

ABZ JTA W 50/30 – 250 – hdg 



SHEAR 


SHEAR 


FACADE 




JTA ETA (European Technical Approval ETA 09/0338) 

ABZ (General Technical Approval Z-21.4-151) 

Profile JTA K 50/30 JTA W 40/22 1 ) JTA K 40/25 1 ) 

Associated Bolts JB M 10–M 20 JC M 10–M 16 JC M 10–M 16 

Round Anchor 

I-Anchor 

3.0 

100 

2.4 

90 

2.75 

90 

30 

18 22 

18 

25 

22 

7.4 

6 

5.5 

50 

40 

40 


Channel Length Anchors Material Anchors Material Anchors Material 

[mm] 

ETA ABZ hdg A4 ETA ABZ hdg A4 ETA ABZ hdg A4 

150 2 2 10.80 29.40 2 2 9.40 29.10 2 2 8.80 24.85 

200 2 2 11.85 34.30 2 2 10.35 34.55 2 2 9.50 28.05 

250 2 2 12.85 39.75 2 2 11.45 40.50 2 2 10.20 32.95 

300 2 2 13.75 45.75 2 2 12.45 47.10 2 2 10.80 37.60 

350 3 3 18.00 55.70 3 3 16.00 56.80 3 3 14.90 44.60 

400 3 3 19.20 61.30 3 3 16.90 63.10 3 3 15.70 48.95 

550 3 3 22.05 79.65 3 3 19.85 81.50 3 3 17.55 62.80 

800 4 4 30.95 112.90 4 4 27.45 112.90 4 4 23.85 88.45 

1050 5 5 37.50 146.40 5 5 34.90 150.10 5 5 30.45 114.05 

3000 13 13 104.95 412.70 13 13 93.05 430.30 13 13 79.65 312.05 

6000 25 25 199.80 786.30 25 25 177.30 819.60 25 25 150.90 594.00 

Price per Metre/lfd. m 4/m 33.30 131.05 4/m 29.55 136.60 4/m 25.15 99.00 

Weight [kg/m] 3.25 2.30 2.25 



[10%] [10%] [10%] [10%] [10%] [10%] 

1 ) 

Hot-dip galvanized version also available with anchor height of approx. 30 mm (without General Technical Approval and European Technical Approval). 

Prices on request. 

2) Profile in stainless steel A2, anchor in A4, on request (not part of General Technical Approval and European Technical Approval). 





■ Calculation example for standard and special fixed 

length: see page 11. 

■Special fixed length: 20 % special fixed length 


Anchor Type: 


■ I-anchor = delivery subject to confirmation 

■ Weight per metre for mill finish version 

(for galvanized profiles: weigth per metre +10 %) 

(average anchor weight) 


Profile JTA K 38/17 1 ) 2) JTA K 28/15 2) 

Associated Bolts JH M 10–M 16 JD M 6–M 12 

Round Anchor 

I-Anchor 

80 

3 

2.3 50 

18 

17 

12 

15 

38 

Number of €/Piece Number of €/Piece 

Channel Length Anchors 

Material 

Anchors 

Material 

[mm] 

ETA ABZ hdg A4 ETA ABZ hdg A4 

100 2 2 6.55 19.05 2 2 5.45 15.70 

150 2 2 7.25 22.45 2 2 6.00 17.70 

200 2 2 7.90 24.85 2 2 6.50 19.05 

250 2 2 8.80 27.70 2 2 7.05 21.10 

300 – 2 9.85 30.65 – 2 7.60 22.80 

300 3 – 13.20 34.80 3 – 10.90 26.30 

350 3 3 14.00 37.90 3 3 11.65 28.35 

400 3 3 14.75 41.20 3 3 12.35 30.45 

550 – 3 16.60 53.10 – 3 13.30 37.10 

550 4 – 18.95 57.10 4 – 16.15 40.80 

800 – 4 22.45 74.70 – 4 17.95 51.90 

800 5 – 25.45 79.65 5 – 20.60 55.90 

1050 – 5 28.20 96.30 – 5 22.35 67.10 

1050 6 – 31.20 101.35 6 – 24.80 71.10 

3000 16 13 67.75 273.95 16 13 50.80 183.00 

6000 31 25 129.00 522.00 31 25 96.60 348.30 

Price per Metre/lfd. m 5/m 4/m 21.50 87.00 4/m 4/m 16.10 58.05 

Weight [kg/m] 2.05 2 1.2 1.15 



[10%] [10%] [10%] [10%] 

28 




■ W 

■ K 

= hot rolled 

= cold formed 

Ordering Example Anchor Channels Short Piece 

Type 

Profile- 

Size 

Channel 

Length 

Anchor Material 

ETA- 

Compliant 

ETA JTA K 38/17 – 300 – 3A – hdg – CE 

ABZ JTA K 38/17 – 300 – hdg 



SHEAR 


SHEAR 


FACADE 



Toothed Channels 

JXA (General Technical Approval Z-21.4-1690) 

Profile JXA W 64/44 JXA W 53/34 JXA W 38/23 JXA W 29/20 

Associated Bolts JXE M 20–M 24 JXB M 16–M 20 

JXH M 12–M 16, 

JH M 10–M 16 

JXD M 12, 

JD M 6–M 12 

Round Anchor 

190 

165 

I-Anchor 

10 

5 

26 

64 

44 

7.5 

4 

22 

53 

34 

5.5 

3 

18 

38 

23 

100 

5 

2.5 

14 

29 

20 

80 

€/Piece 

€/Piece 

€/Piece 

€/Piece 

Number 

Number 

Number 

Number 


of 

of 

of 

[mm] 

Material Material Material of Material 

Anchors 

Anchors 

Anchors 

Anchors 

hdg A4 hdg A4 hdg A4 hdg 

150 2 49.90 

2 27.25 111.20 2 12.10 39.10 2 9.10 

200 2 57.40 2 30.20 133.25 2 13.55 48.35 2 10.00 

250 2 64.95 2 33.35 155.20 2 15.10 57.90 2 11.05 

300 2 72.45 2 36.65 177.55 2 16.65 67.00 3 12.05 

350 3 94.15 Prices 3 47.25 209.15 3 20.75 80.35 3 15.45 

400 3 101.65 on 3 50.45 230.90 3 22.25 89.35 3 16.35 

550 3 124.25 request 3 62.80 296.65 3 26.55 116.65 4 19.20 

800 4 175.00 4 80.10 417.00 4 37.10 166.75 5 26.50 

1050 5 225.70 5 112.70 536.45 5 47.15 217.00 6 33.70 

3000 13 663.80 13 319.95 1414.40 13 123.10 618.00 16 89.90 

6000 25 1309.80 25 609.00 2693.70 25 234.30 1177.20 31 171.30 

Price per Metre/lfd.m 4/m 218.30 p. o. r. 4/m 101.50 448.95 4/m 39.05 196.20 5/m 28.55 

Weight kg/m 8.30 5.50 2.70 1.70 



[10%] [10%] [10%] [10%] [10%] [10%] [10%] 





■ Calculation example for standard and special 

fixed length: see page 11. 

■ Special fixed length: 20 % special fixed length 


Anchor Type: 


■ I-anchor = delivery subject to confirmation 

■ Weight per metre for mill finish version 

■ (for galvanized profiles: weigth per metre +10 %) 

(average anchor weight) 


JXA - PC 

Profil JXA - PC W 64/44 JXA - PC W 53/34 JXA - PC W 38/23 JXA - PC W 29/20 

Associated Bolts JXE M 20–M 24 JXB M 16–M 20 

JXH M 12–M 16, 

JH M 10–M 16 

JXD M 12, 

JD M 6–M 12 

Round Anchor 

200 

180 

170 

165 

10 

5 

26 

64 

44 

7.5 

4 

22 

53 

€/Piece 

€/Piece 

€/Piece 

€/Piece 

Number 

Number 

Number 

Number 


of 

of 

of 

[mm] 

Material Material Material of Material 

Anchors 

Anchors 

Anchors 

Anchors 

hdg A4 hdg A4 hdg A4 hdg 

150 2 92.20 

2 79.90 

2 66.45 

2 59.70 

200 2 101.45 2 86.00 2 69.35 2 62.00 

250 2 109.40 2 88.40 2 71.60 2 64.25 

300 2 117.45 2 93.35 2 76.05 3 73.05 

350 3 140.15 Prices 3 113.95 Prices 3 100.20 Prices 3 78.45 

400 3 152.65 on 3 122.65 on 3 103.00 on 3 92.65 

550 3 182.15 request 3 142.30 request 3 111.45 request 4 107.10 

800 4 229.65 4 177.80 4 136.85 5 133.10 

1050 5 264.85 5 203.75 5 172.45 6 163.95 

3000 13 779.05 13 477.85 13 361.95 16 333.50 

6000 25 1536.90 25 860.70 25 631.50 31 599.40 

Price per Metre/lfd.m 4/m 256.15 p. o. r. 4/m 143.45 p. o. r. 4/m 105.25 p. o. r. 5/m 99.90 

Weight kg/m 8.76 5.74 3.51 2.46 



[10%] [10%] [10%] [10%] [10%] [10%] [10%] 

34 

5.5 

3 

18 

38 

23 

5 

2.5 

14 

29 

20 




■ W 

■ K 

= hot rolled 

= cold formed 

Ordering Example for Anchor Channels JXA 

Type 

Profile 

Size 

Channel 

Length 

Ordering Example for Anchor Channels JXA - PC 

Material 

JXA W 38/23 – 6.000 – hdg 

Type 

Profile 

Size 

Channel 

Length 

Material 

JXA - PC W 38/23 – 6.000 – hdg 



SHEAR 


SHEAR 


FACADE 



Toothed Channels 

JZA (General Technical Approval 

Z-21.4-741) 

JSA (without General Technical 

Approval) 

Profile JZA K 41/22 1 ) 

Associated Bolts JZS M 12–M 16 

Profile JSA K 38/17 JSA K 28/15 

Associated Bolts JH M 10–M 16 JD M 6–M 12 

Strap Type 2 × 20 × 400 1,5 × 15 × 320 

3 

2,3 

18 

17 

12 15 

Round Anchor 

38 

28 

I-Anchor 

7.5 

2.5 

€/Piece 

Number 


of 

[mm] 

Material 

Anchors 

hdg A4 

100 2 8.85 25.60 

150 2 10.35 29.90 

200 2 11.30 34.40 

250 2 12.10 38.65 

300 2 13.25 42.80 

350 3 16.40 53.55 

400 3 17.45 57.95 

550 3 20.75 70.30 

800 4 29.45 97.15 

1050 5 36.10 126.30 

3000 13 94.70 343.35 

6000 25 180.90 655.50 

22 

41 

22 

90 

incl. 

Strap 

€/Piece 

Material 

hdg 

without 

Strap 

incl. 

Strap 

€/Piece 

Material 

hdg 

without 

Strap 

€/Meter 17.45 13.30 11.45 10.00 

Weight kg/m 2.30 1.35 

Fixed 


[10%] [10%] 

Price per Metre/lfd.m 4/m 30.15 109.25 

Weight kg /m 2.30 



[10%] [10%] 

1 ) 

Hot-dip galvanized version also available with anchor height of 

approx. 30 mm (without General Technical Approval and European 

Technical Approval). Prices on request. 

Ordering Example Anchor Channels JZA 

Type 

Profile 

Size 

Channel 

Length 

Material 

JZA K 41/22 – 6,000 – hdg 




■ W 

■ K 

= hot rolled 

= cold formed 


Anchor Channel Pricing 

■ Prices quoted in this list are gross prices. 

Calculating prices 

Material: mill finish/galvanized 

+ 

– 

gross price 

surcharge for increased 

cost of steel 

Discount 

Final net price 

Material: Stainless Steel A2 or A4 

+ 

+ 

– 

gross price 

Surcharge for increased 

cost of steel 

alloy surcharge 

Discount 

= Final net price 

Standard Fixed Lengths 

■The standard fixed-length surcharge is 10 %. 

Anchor Channels with max. anchor spacing 200 mm: 

JTA K 38/17, JTA K 28/15, 

JXA W 29/20, JXA-PC W 29/20 

Standard fixed lengths [mm] 

1250 

1450 

1650 

1850 

2050 

2250 

2450 

2650 

2850 

3050 

3250 

3450 

3650 

3850 

4050 

4250 

4450 

4650 

4850 

5050 


JTA W 53/34, JTA W 50/30, JTA W 40/22, 

JTA K 53/34, JTA K 50/30, JTA K 40/25, 

JXA W 64/44, JXA W 53/34, JXA W 38/23, 

JXA-PC W 64/44, JXA-PC W 53/34, JXA-PC W 38/23, 

JZA K 41/22 

Length less than 1,050 mm are short lengths. 

Length above 1,050 mm are fixed lengths. 

Pricing for fixed lengths 

(on the basis of price per metre) 

× 

× 

× 

– 

Price per Metre [€/m] 

Length 

Cost and alloy surcharges 

Fixed 

Length Surcharge [%] 

Discount 

= Final net price 


1300 

1550 

1800 

2050 

2300 

2550 

2800 

3050 

3300 

3550 

3800 

4050 

4300 

4550 

4800 

5050 


JTA W 55/42, JTA W 72/48, 

JTA K 72/48 


1350 

1650 

1950 

2250 

2550 

2850 

3150 

3450 

3750 

4050 

4350 

4650 

4950 

5250 

5550 

5850 

Special fixed lengths 

All other fixed lengths are special fixed lengths. 

The calculation here is based on a fixed length 

surcharge of 20 % (increased production costs). 

Mounting and Framing Channels 

For mounting and framing channels, the fixed length 

surcharge applies which is shown in the price list. Here 

there are no standard lengths. 



SHEAR 


SHEAR 


FACADE 



Profiled Metal Sheet Channels 

JTB (General Technical Approval Z-21.4-161) 

e 

JTB-uni 

€/m 

Anchor Distance Anchor Weight 

e [mm] per 3 m [kg/m] 

Material 

hdg A4 

JTB 60/24/3,0-uni ( Material Strength 3 mm ) 

450 8 2.38 18.40 73.65 

150 20 2.51 25.75 96.35 

JTB 60/22/6,0-uni ( Material Strength 6 mm ) 

450 8 3.97 29.65 on 

150 20 4.10 37.40 request 

End Anchor JTB - EB 

incl. 4 Drill Screws 

with 4,8 × 16 mm 

€/Set 

Material 

hdg 

6.25 

e 

JTB-AR 

€/m 

Anchor Distance Anchor Weight 

e [mm] pro 3 m [kg/m] 

Material 

hdg A4 

JTB 60/24/3,0-AR ( Material Strength 3 mm ) 

450 8 2.40 18.40 73.65 

150 20 2.54 25.75 96.35 

JTB 60/22/6,0-AR ( Material Strength 6 mm ) 

450 8 3.99 29.65 on 

150 20 4.13 37.40 request 

End Anchor JTB - EA 

incl. 4 Drill Screws 

with 4,8 × 16 mm 

€/Set 

Material 

hdg 

6.25 

Anchor Arrangement 

■ Standard anchor spacing e = 450 mm 

will be delivered if not requested otherwise 

 

■ All prices incl. foamfilling 


■ Weight per metre for mill finish (for galvanized 

profiles: weight per metre +10 %) 

 

 

e 

 

 




Ordering Example Profiled Metal Sheet Channels 

 

 

 

Type 

Profile 

Size 

Anchor 

Distance 

Anchor 

Type 

Material 

JTB – 60/24/3,0 – 450 – uni – hdg 


Railing Fastening 

JGB Straight Short Piece (General Technical Approval Z-21.4-1913) 

Type Profile 1) Anchor Diameter Material 

JGB ... G 

JGB ... DA 

JGB ... W 

Profile Length Price € 

100 120 150 200 220 250 

JGB K 38/17 G-... 

10 hdg 19.80 20.10 20.30 21.00 21.15 21.70 

Installation height H = 165 mm A4 38.30 39.30 41.30 44.20 45.20 47.10 

JGB K 40/25 G-... 

12 

hdg 21.15 21.60 21.90 22.70 22.95 23.35 


JGB K 50/30 G-... 

12 

hdg 23.90 24.25 24.95 26.05 26.50 27.05 


JGB K 53/34 G-... 

14 

hdg 28.65 29.50 30.50 32.35 33.00 34.00 


JGB K 38/17 DA-... 

10 hdg Prices on request 

Installation height H = 120 mm A4 – – – – – – 

JGB K 40/25 DA-... 

10 

hdg 

Prices on request 


JGB K 50/30 DA-... 

12 

hdg 



JGB K 53/34 DA-... 

14 

hdg 



JGB K 38/17 W-... 

10 hdg 23.35 23.45 24.00 24.65 25.05 25.25 


JGB K 40/25 W-... 

12 

hdg 25.05 25.25 25.65 26.35 26.70 27.05 


JGB K 50/30 W-... 

12 

hdg 27.40 27.60 28.40 29.50 29.90 30.50 


JGB K 53/34 W-... 

14 

hdg 32.10 32.90 33.90 35.45 36.25 37.20 


JGB Corner Piece with Reinforcing Bars (without Approval) 

Type G 

Profile 

Profile Dimensions 

l = 170 x 170 mm 

Anchor 

Diameter 

JGB K 38/17 G-170 x 170 10 

JGB K 40/25 G-170 x 170 12 

JGB K 50/30 G-170 x 170 12 

JGB K 53/34 G-170 x 170 14 

Material Price € 

hdg 39.25 

A4 80.70 

hdg 41.60 

A4 87.75 

hdg 44.65 

A4 93.65 

hdg 49.45 

A4 114.90 

Ordering Example 

Railing Fastening JGB 

Type Profile Type Length Material 

Size 

JGB K 38/17 G – 200 – A4 

JGB Corner Piece with Forged Head (without Approval) 

Type DA 

1) Hot rolled profiles on request 

Profile 

Profile Dimensions 

l = 170 x 170 mm 

Anchor 

Diameter 

JGB K 38/17 DA-170 x 170 12 

JGB K 40/25 DA-170 x 170 14 

JGB K 50/30 DA-170 x 170 14 

JGB K 53/34 DA-170 x 170 14 

Material Price € 

hdg Price a. A. 

A4 – 


A4 90.40 


A4 96.45 


A4 118.35 


■Hot-dip galvanized version 

(hdg) > 50 μm (for indoor use) 

■ Profile steel 1.0038 and anchor 

B St 500 S 

■ Stainless steel (A4) 

profile 1.4401/1.4404/1.4571 

and anchor B St 500 S or 

B St 500 NR with K 38/17 

■ Filling PE foam 

All prices including foam filling 

and 2 anchors 



SHEAR 


SHEAR 


FACADE 



Profile-Brackets 

JK 

Bracket Type JK 28/28-1 JK 36/36-1 JK 36/36-2 

h 

h 

L 

L 

Profile K 28/28 K 36/36 K 36/36 

Associated Bolts Type JD, M 6–M 12 Type JH, M 10–M 16 Type JH, M 10–M 16 

Extension Profile 

for Bolt 

U 36/24 

M 12 

U 45/27 

M 12 

U 45/27 

M 12 

Bracket Length L [mm] 100 200 300 400 300 400 500 600 300 400 500 600 700 

Height h [mm] 120 120 120 120 180 180 180 180 208 238 269 300 330 

Material hdg 24.10 24.85 25.70 26.35 32.85 34.85 38.45 42.45 45.95 50.35 55.10 59.15 64.15 

€/Piece A4 Prices on request Prices on request Prices on request 

Ordering Example Profile-Brackets JK 

Edge Protection Angle 

JKW 

Type Profile Bracket Length L Material 

JK – K 28/28-1 – 100 – hdg 

a 

R 

s 

I 

a 

92° 

L 

250 n 500 250 


■ hdg = hot-dip galvanized 1.0038 

■ A4 = stainless steel material 1.4401/1.4404/1.4571 

■ A2 = stainless steel material 1.4301 

e 

Type a/s Length Number €/Piece 

[mm] of 

Anchors Material 

hdg A4/A2 

JKW - 50/5 - 500 2 30.40 

JKW - 50/5 - 750 2 36.45 

JKW - 50/5 - 1000 2 48.55 

JKW - 50/5 - 1500 3 59.65 

JKW - 50/5 - 2000 4 76.60 

JKW - 80/6 - 500 2 39.80 

JKW - 80/6 - 750 2 52.05 

JKW - 80/6 - 1000 2 69.05 

JKW - 80/6 - 1500 3 90.10 

JKW - 80/6 - 2000 4 115.80 Prices 

on 

JKW - 100/6 - 500 2 45.85 request 

JKW - 100/6 - 570 2 60.10 

JKW - 100/6 - 1000 2 73.95 

JKW - 100/6 - 1500 3 108.50 

JKW - 100/6 - 2000 4 142.85 

JKW - 100/8 - 500 2 53.50 

JKW - 100/8 - 750 2 73.15 

JKW - 100/8 - 1000 2 99.05 

JKW - 100/8 - 1500 3 132.10 

JKW - 100/8 - 2000 4 171.55 

Ordering Example Edge Protection Angle JKW 

Type Length Material 

JKW – 50/5 – 2,000 – hdg 


Curved Channels 

Anchor Channels JTA / JXA 

Mounting Channels JM / JXM 

Profile JTA / JM Material Price 

R i 

max./min. L [m] 

max./m.L[m] 

R a 

 

 

W 72/48 

hdg, A4 

K 72/48 

hdg, A4 

W 55/42 

hdg 

W 53/34 

hdg, A4 

K 53/34 

hdg, A4 

W 50/30 

hdg, A4 

K 50/30 

hdg, A4 

W 40/22 

hdg, A4 

K 40/25 

hdg, A4 

K 38/17 

hdg, A4, A2 

K 28/15 

hdg, A4, A2 

Profile JXA/JXM 

W 38/23 

hdg, A4 

W 29/20 

hdg, A4 

Prices 

on 

request 

R i = internal profile slot; R a = external profile slot 

Ordering Example Curved Anchor Channels 

Type 

Profile 

Stretched 

Length L [m] 

Material 

Bending 

Radius [m] 

JTA – K 38/17 – 1.05 – hdg R i = 1,00 

Minimum Bending Radii / Channel Lengths (all materials) 

Profile 

K 72/48 

W 72/48 

W 55/42 K 53/34 

W 53/34 

JTA / JM 

K 50/30 

W 50/30 

K 40/25 

W 40/22 

JXA / JXM 

K 38/17 K 28/15 W 38/23 W 29/20 

min R i [m] 1.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 

min R a [m] 3.0 3.0 2.5 2.0 2.0 1.5 1.0 2.0 2.0 

min L [m] 

minimum 


1.5 1.5 1.5 1.5 1.0 0.5 0.5 0.5 0.5 

max L [m] 

maximum 


5.5 5.5 5.8 5.8 5.8 5.8 5.8 5.8 5.8 


■ hdg = hot-dip galvanized 1.0038 

■ A4 = stainless steel material 1.4401/1.4404/1.4571 

■ A2 = stainless steel material 1.4301 



SHEAR 


SHEAR 


FACADE 



Bolts & Accessories 

Determining the Required Bolt Length 

f 

l k 

m+s+u 

l 

l = bolt length 

l k = clamping length (thickness of 

the attached part) 

f = profile nose and thickness 

respectively 

(please see profile pages) 

m = nut height to EN ISO 4032 

s = washer thickness to 

EN ISO 7093-1 

u = bolt projection to 

EN ISO 4753 

Bolt 

Total 

m + s + u 

[mm] 

M 6 8.8 

M 8 11.3 

M 10 13.9 

M 12 17.3 

M 16 21.8 

M 20 27.0 

M 24 32.5 

M 27 35.8 

M 30 38.6 

erf l [ mm ] = l k +f + ( m+s+u ) 

Example 

JORDAHL ® anchor channel JTA K 53/34, 

f = 8 mm, available clamping length 

l k = 65 mm, bolt JB M16 zp 

required l = 65 + 8 + 21,8 = 94,8 mm 

selected: JB M 16 × 100 zp 

JA 

JB 

58.0 

41.6 

l 

l 

for profiles: 

W 72/48, K 72/48 

Thread × Length l 

[mm] 

Pack Qty 

[Piece] 

Price 

€/100 Piece 

Hot-dip galvanized (hdg), Grade 4.6 

JA M 20 × 50 hdg 50 718.25 

JA M 20 × 75 hdg 50 781.85 

JA M 20 × 100 hdg 25 802.35 

JA M 20 × 150 hdg 25 1037.65 

JA M 20 × 200 hdg 25 1185.40 

JA M 24 × 50 hdg 25 687.70 

JA M 24 × 75 hdg 25 755.10 

JA M 24 × 100 hdg 25 848.20 

JA M 24 × 150 hdg 25 1053.15 

JA M 24 × 200 hdg 10 1269.40 

JA M 27 × 75 hdg 10 982.95 

JA M 27 × 100 hdg 10 1098.00 

JA M 30 × 75 hdg 25 1096.45 

JA M 30 × 100 hdg 10 1323.40 

JA M 30 × 150 hdg 25 1654.95 

JA M 30 × 200 hdg 5 2003.30 


JA M 20 × 75 hdg 8.8 50 1089.35 

JA M 20 × 100 hdg 8.8 25 1183.75 

JA M 20 × 125 hdg 8.8 25 1340.35 

JA M 24 x 75 hdg 8.8 25 1258.35 

JA M 24 × 100 hdg 8.8 25 1368.05 

JA M 24 × 150 hdg 8.8 20 1631.90 

JA M 24 × 200 hdg 8.8 10 1973.95 

Stainless Steel, Quality A4-50 

JA M 24 × 50 A4-50 20 4724.50 

JA M 24 × 100 A4-50 15 6339.10 

JA M 24 × 100 A4-70 15 7923.55 

for profiles: 

W 55/42, W 53/34, K 53/34, K 50/40, 

W 50/30, K 50/30, K 48/26 


[mm] 

Pack Qty 

[Piece] 


€/100 Piece 

Zinc-plated (zp), Grade 4.6 

JB M 10 × 30 zp 100 260.70 

JB M 10 × 40 zp 100 261.90 

JB M 10 × 50 zp 100 265.50 

JB M 10 × 60 zp 100 274.90 

JB M 10 × 80 zp 100 322.00 

JB M 10 × 100 zp 100 339.20 

JB M 12 × 30 zp 100 220.95 

JB M 12 × 40 zp 100 230.70 

JB M 12 × 50 zp 100 239.80 

JB M 12 × 60 zp 50 247.75 

JB M 12 × 80 zp 50 281.40 

JB M 12 × 100 zp 50 344.80 

JB M 12 × 125 zp 50 515.10 

JB M 12 × 150 zp 25 609.00 

JB M 12 × 200 zp 25 827.50 

JB M 16 × 30 zp 50 267.80 

JB M 16 × 40 zp 50 275.05 

JB M 16 × 50 zp 50 289.40 

JB M 16 × 60 zp 50 297.25 

JB M 16 × 80 zp 50 338.85 

JB M 16 × 100 zp 50 400.05 

JB M 16 × 125 zp 25 514.15 

JB M 16 × 150 zp 25 580.15 

JB M 16 × 200 zp 50 703.70 

JB M 16 × 300 zp 25 990.80 

JB M 20 × 35 zp 25 339.90 

JB M 20 × 45 zp 25 343.45 


JB 


[mm] 

Pack Qty 

[Piece] 


€/100 Piece 

JB M 20 × 55 zp 25 366.45 

JB M 20 × 65 zp 25 378.45 

JB M 20 × 75 zp 25 400.30 

JB M 20 × 100 zp 50 463.70 

JB M 20 × 125 zp 25 613.80 

JB M 20 × 150 zp 25 714.55 

JB M 20 × 200 zp 25 918.70 

JB M 20 × 300 zp 25 1210.65 

JB M 24 × 60 zp 25 844.20 

JB M 24 × 75 zp 25 957.60 


JB M 10 × 100 hdg 100 339.20 

JB M 12 × 30 hdg 100 220.95 

JB M 12 × 50 hdg 100 239.80 

JB M 12 × 60 hdg 50 247.75 

JB M 12 × 80 hdg 50 281.40 

JB M 12 × 100 hdg 50 344.80 

JB M 12 × 125 hdg 50 515.10 

JB M 16 × 50 hdg 50 289.40 

JB M 16 × 60 hdg 50 297.25 

JB M 16 × 80 hdg 50 338.85 

JB M 16 × 100 hdg 25 400.05 

JB M 20 × 45 hdg 25 353.15 

JB M 20 × 55 hdg 25 366.45 

JB M 20 × 65 hdg 25 378.45 

JB M 20 × 75 hdg 25 400.30 

JB M 20 × 100 hdg 25 463.70 

JB M 20 × 125 hdg 25 613.80 

JB M 20 × 150 hdg 25 714.55 


JB M 12 × 40 hdg 8.8 100 332.50 

JB M 12 × 50 hdg 8.8 100 390.15 

JB M 12 × 60 hdg 8.8 50 441.95 

JB M 12 × 80 hdg 8.8 50 470.10 

JB M 12 × 100 hdg 8.8 50 540.60 

JB M 16 × 50 hdg 8.8 50 477.90 

JB M 16 × 60 hdg 8.8 50 545.00 

JB M 16 × 80 hdg 8.8 50 588.50 

JB M 16 × 100 hdg 8.8 50 697.35 

JB M 16 × 125 hdg 8.8 50 877.60 

JB M 20 × 55 hdg 8.8 1 ) 25 598.35 

JB M 20 × 60 hdg 8.8 1 ) 25 608.80 

JB M 20 × 65 hdg 8.8 1 ) 25 617.05 

JB M 20 × 75 hdg 8.8 1 ) 25 664.30 

JB M 20 × 100 hdg 8.8 1 ) 25 723.35 

JB M 20 × 125 hdg 8.8 1 ) 25 928.50 

JB M 24 × 75 hdg 8.8 1 ) 25 1155.80 

JB M 24 × 100 hdg 8.8 1 ) 25 1289.30 

■ All prices incl. nuts; 

washers to be ordered separately 


[mm] 

Pack Qty 

[Piece] 


€/100 Piece 


JB M 10 × 30 A4-50 50 1448.60 

JB M 12 × 30 A4-50 50 1629.50 

JB M 12 × 40 A4-50 50 1644.65 

JB M 12 × 50 A4-50 50 1782.60 

JB M 12 × 60 A4-50 50 1924.40 

JB M 12 × 100 A4-50 50 2685.35 

JB M 12 × 125 A4-50 25 3229.25 

JB M 16 × 30 A4-50 50 2606.95 

JB M 16 × 40 A4-50 50 2880.75 

JB M 16 × 50 A4-50 25 3069.85 

JB M 16 × 60 A4-50 25 3119.10 

JB M 16 × 80 A4-50 25 3876.65 

JB M 16 × 125 A4-50 25 4409.65 

JB M 16 × 150 A4-50 25 4627.25 

JB M 16 × 200 A4-50 25 5465.65 

JB M 20 × 45 A4-50 25 3119.10 

JB M 20 × 55 A4-50 25 3352.55 

JB M 20 × 65 A4-50 25 3591.25 

JB M 20 × 75 A4-50 25 3823.70 

JB M 20 × 100 A4-50 25 3883.15 

JB M 20 × 125 A4-50 25 4724.50 

JB M 20 × 150 A4-50 25 5399.10 

Stainless Steel, Quality FA-70 ( 1.4462 ) 2) 

JB M 12 × 40 FA-70 50 1644.70 

JB M 12 × 50 FA-70 50 1781.60 

JB M 12 × 100 FA-70 25 2679.05 

JB M 16 × 50 FA-70 25 3316.60 

JB M 16 × 80 FA-70 25 4187.55 

JB M 20 × 55 FA-70 25 3978.85 

JB M 20 × 100 FA-70 25 4608.75 

JB M 20 × 150 FA-70 25 6404.70 

JB M 24 also applies to JE M 24 

JE 

41.5 

for profile: W 55/42 


[mm] 

Pack Qty 

[Piece] 


€/100 Piece 


JE M 24 × 60 zp 25 844.20 

JE M 24 × 75 zp 25 957.60 


JE M 24 x 75 hdg 8.8 25 1155.80 

JE M 24 x 100 hdg 8.8 25 1289.30 

1 ) Not for profile K 48/26 

2) Description of FA also applies to F4 (1.4462) 



SHEAR 


SHEAR 


FACADE 




JC 

32.7 

for profiles: 

W 40/22, K 40/22, K 40/25 


[mm] 

l 

Pack Qty 

[Piece] 


€/100 Piece 


JC M 10 × 20 zp 100 122.50 

JC M 10 × 30 zp 100 123.70 

JC M 10 × 40 zp 100 130.80 

JC M 10 × 50 zp 100 133.35 

JC M 10 × 60 zp 100 146.60 

JC M 10 × 80 zp 100 240.15 

JC M 10 × 100 zp 100 246.15 

JC M 12 × 20 zp 50 152.50 

JC M 12 × 30 zp 100 154.65 

JC M 12 × 40 zp 100 156.65 

JC M 12 × 50 zp 100 164.50 

JC M 12 × 60 zp 50 172.50 

JC M 12 × 80 zp 50 212.10 

JC M 12 × 100 zp 50 248.70 

JC M 12 × 125 zp 50 341.20 

JC M 12 × 150 zp 25 527.30 

JC M 12 × 200 zp 25 554.95 

JC M 16 × 30 zp 50 204.20 

JC M 16 × 40 zp 50 220.95 

JC M 16 × 50 zp 50 237.80 

JC M 16 × 60 zp 50 241.40 

JC M 16 × 80 zp 100 283.40 

JC M 16 × 100 zp 25 311.45 

JC M 16 × 125 zp 25 476.80 

JC M 16 × 150 zp 25 535.65 

JC M 16 × 200 zp 25 665.25 

JC M 16 × 250 zp 25 745.65 

JC M 16 × 300 zp 25 894.65 


JC M 10 × 30 hdg 100 123.70 

JC M 10 × 40 hdg 100 130.80 

JC M 10 × 60 hdg 100 146.60 

JC M 10 × 80 hdg 100 240.15 

JC M 12 × 40 hdg 100 156.65 

JC M 12 × 50 hdg 100 164.50 

JC M 12 × 60 hdg 100 172.50 

JC M 12 × 80 hdg 50 212.10 

JC M 12 × 100 hdg 50 248.70 

JC M 16 × 40 hdg 50 220.95 

JC M 16 × 50 hdg 100 237.80 

JC M 16 × 60 hdg 50 241.40 

JC M 16 × 80 hdg 50 283.40 

JC M 16 × 100 hdg 25 311.45 

1 ) Description of FA also applies to F4 (1.4462) 

2 ) Bolts JH in combination with profile W 38/23 not for longitudinal loads 


[mm] 

Pack Qty 

[Piece] 


€/100 Piece 


JC M 12 × 40 hdg 8.8 100 226.00 

JC M 12 × 50 hdg 8.8 100 234.30 

JC M 12 × 60 hdg 8.8 100 245.10 

JC M 12 × 80 hdg 8.8 50 299.20 

JC M 12 × 100 hdg 8.8 50 329.75 

JC M 16 × 40 hdg 8.8 50 335.00 

JC M 16 × 60 hdg 8.8 50 363.30 

JC M 16 × 80 hdg 8.8 50 445.60 

JC M 16 × 100 hdg 8.8 25 490.90 

JC M 16 × 125 hdg 8.8 25 628.90 


JC M 10 × 30 A4-50 50 2089.20 

JC M 10 × 40 A4-50 100 2134.25 

JC M 10 × 50 A4-50 50 2220.35 

JC M 12 × 30 A4-50 100 1409.10 

JC M 12 × 40 A4-50 50 1558.60 

JC M 12 × 50 A4-50 50 1698.80 

JC M 12 × 60 A4-50 50 1784.35 

JC M 12 × 80 A4-50 50 1967.60 

JC M 12 × 100 A4-50 50 2167.70 

JC M 12 × 150 A4-50 25 3059.30 

JC M 16 × 30 A4-50 50 1596.05 

JC M 16 × 40 A4-50 50 1710.05 

JC M 16 × 50 A4-50 50 1851.95 

JC M 16 × 60 A4-50 25 1932.40 

JC M 16 × 80 A4-50 25 2095.05 

JC M 16 × 100 A4-50 25 2648.20 

JC M 16 × 150 A4-50 25 3472.20 

JC M 16 × 200 A4-50 25 4266.50 


JC M 12 × 40 FA-70 50 1881.85 

JC M 12 × 50 FA-70 50 2038.55 

JC M 16 × 40 FA-70 50 2022.10 

JC M 16 × 50 FA-70 50 2222.30 

JH 

30.5 

for profiles: 

K 38/17, K 36/36, K 36/20, W 38/23 2 ) 


[mm] 

l 

Pack Qty 

[Piece] 


€/100 Piece 


JH M 10 × 20 zp 100 112.90 

JH M 10 × 30 zp 100 114.05 

JH M 10 × 40 zp 100 121.20 

JH M 10 × 50 zp 100 126.15 

JH M 10 × 60 zp 100 129.80 

JH M 10 × 80 zp 50 174.25 

JH M 10 × 100 zp 50 220.00 

JH M 10 × 150 zp 50 390.45 


JH 


[mm] 

Pack Qty 

[Piece] 


€/100 Piece 


JH M 12 × 20 zp 100 120.15 

JH M 12 × 30 zp 100 126.85 

JH M 12 × 40 zp 100 130.80 

JH M 12 × 50 zp 100 135.70 

JH M 12 × 60 zp 50 146.60 

JH M 12 × 80 zp 50 158.55 

JH M 12 × 100 zp 25 255.80 

JH M 12 × 125 zp 25 327.05 

JH M 12 × 150 zp 25 396.30 

JH M 12 × 200 zp 25 654.00 

JH M 12 × 300 zp 25 878.90 

JH M 16 × 30 zp 50 176.50 

JH M 16 × 40 zp 50 179.05 

JH M 16 × 50 zp 50 195.75 

JH M 16 × 60 zp 50 213.80 

JH M 16 × 80 zp 50 247.40 

JH M 16 × 100 zp 25 313.10 

JH M 16 × 125 zp 25 443.20 

JH M 16 × 150 zp 25 519.25 

JH M 16 × 200 zp 25 761.55 


JH M 10 × 50 hdg 50 126.50 

JH M 10 × 60 hdg 50 129.80 

JH M 10 × 80 hdg 50 174.25 

JH M 12 × 30 hdg 100 126.85 

JH M 12 × 40 hdg 100 130.80 

JH M 12 × 60 hdg 50 146.60 

JH M 12 × 80 hdg 50 158.55 

JH M 12 × 100 hdg 25 255.80 

JH M 12 × 125 hdg 25 327.05 

JH M 16 × 40 hdg 50 179.05 

JH M 16 × 50 hdg 50 195.75 


JH M 12 × 100 hdg 8.8 25 297.00 

JH M 16 × 60 hdg 8.8 50 367.35 


JH M 10 × 30 A4-50 100 992.65 

JH M 10 × 40 A4-50 100 1113.90 

JH M 10 × 50 A4-50 100 1153.15 

JH M 10 × 60 A4-50 100 1213.05 

JH M 12 × 25 A4-50 100 926.90 

JH M 12 × 30 A4-50 100 973.85 

JH M 12 × 40 A4-50 100 1035.25 

JH M 12 × 50 A4-50 100 1113.90 

JH M 12 × 60 A4-50 100 1231.65 

JH M 12 × 80 A4-50 100 1270.70 

JH M 12 × 100 A4-50 100 1699.45 

JH M 12 × 150 A4-50 25 2711.80 

JH M 12 × 200 A4-50 50 3053.50 

JH M 16 × 25 A4-50 50 1252.25 

JH M 16 × 30 A4-50 50 1304.50 

JH M 16 × 40 A4-50 50 1416.45 

JH M 16 × 50 A4-50 25 1566.20 

JH M 16 × 60 A4-50 25 1665.25 

JH M 16 × 80 A4-50 25 1913.70 

JH M 16 × 100 A4-50 25 2147.30 

JH M 16 × 150 A4-50 25 3343.40 

JH M 16 × 200 A4-50 25 4016.70 

3 ) Bolts JD in combination with profile W 29/20 not for longitudinal loads 

4 ) JD M 12 not for profile K 28/12 

JD 

22.4 

for profiles: 

K 28/28, K 28/15, K 28/12, W 29/20 3 ) 


[mm] 

l 

Pack Qty 

[Piece] 


€/100 Piece 


JD M 6 × 15 zp 500 69.70 

JD M 6 × 20 zp 500 70.95 

JD M 6 × 25 zp 500 72.05 

JD M 6 × 30 zp 500 75.60 

JD M 6 × 40 zp 500 76.95 

JD M 6 × 50 zp 500 79.25 

JD M 6 × 60 zp 500 81.60 

JD M 8 × 15 zp 500 56.50 

JD M 8 × 20 zp 500 57.80 

JD M 8 × 25 zp 500 58.80 

JD M 8 × 30 zp 500 61.25 

JD M 8 × 40 zp 500 64.95 

JD M 8 × 50 zp 500 67.20 

JD M 8 × 60 zp 500 82.95 

JD M 8 × 80 zp 500 144.65 

JD M 8 × 100 zp 100 195.75 

JD M 8 × 150 zp 100 359.25 

JD M 10 × 15 zp 500 75.35 

JD M 10 × 20 zp 500 78.10 

JD M 10 × 25 zp 500 80.45 

JD M 10 × 30 zp 500 83.25 

JD M 10 × 40 zp 100 95.10 

JD M 10 × 50 zp 100 103.35 

JD M 10 × 60 zp 100 108.05 

JD M 10 × 80 zp 50 156.20 

JD M 10 × 100 zp 50 208.90 

JD M 10 × 125 zp 50 320.75 

JD M 10 × 150 zp 100 390.45 

JD M 10 × 200 zp 50 618.45 

JD M 12 × 30 zp 4 ) 200 145.30 

JD M 12 × 40 zp 4 ) 100 150.35 

JD M 12 × 50 zp 4 ) 100 158.55 

JD M 12 × 80 zp 4 ) 100 172.95 


JD M 10 × 30 hdg 500 83.25 

JD M 10 × 40 hdg 100 95.10 

JD M 10 × 60 hdg 100 108.05 

JD M 10 × 80 hdg 50 156.20 

JD M 10 × 100 hdg 50 208.90 

JD M 12 × 50 hdg 4 ) 100 158.55 

JD M 8 × 30 A4-50 100 570.15 

JD M 8 × 50 A4-50 100 668.30 

JD M 10 × 20 A4-50 100 585.05 

JD M 10 × 25 A4-50 100 611.00 

JD M 10 × 30 A4-50 100 637.45 

JD M 10 × 40 A4-50 100 687.60 

JD M 10 × 50 A4-50 100 747.70 

JD M 10 × 60 A4-50 100 794.20 

JD M 10 × 80 A4-50 100 977.45 

JD M 10 × 100 A4-50 50 1291.70 

JD M 10 × 125 A4-50 50 1446.50 

JD M 10 × 150 A4-50 50 1654.00 

JD M 10 × 200 A4-50 50 2225.60 



SHEAR 


SHEAR 


FACADE 




JG 

17.0 

Toothed Bolts 

JXE 

 

l 

l 

for profile: K 21/12 


[mm] 

Pack Qty 

[Piece] 


€/100 Piece 


JG M 6 × 15 zp 500 58.80 

JG M 6 × 20 zp 500 62.40 

JG M 6 × 30 zp 500 66.15 

JG M 6 × 40 zp 200 70.95 

JG M 6 × 50 zp 200 76.95 

JG M 6 × 60 zp 100 81.60 

JG M 8 × 15 zp 400 58.80 

JG M 8 × 20 zp 400 61.25 

JG M 8 × 25 zp 400 62.40 

JG M 8 × 30 zp 400 63.70 

JG M 8 × 40 zp 400 70.95 

JG M 8 × 50 zp 400 78.10 

JG M 8 × 60 zp 100 91.30 

JG M 8 × 80 zp 100 264.25 

JG M 8 × 100 zp 100 270.30 


JG M 8 × 30 A4-50 250 521.50 

JG M 8 × 40 A4-50 250 556.90 

JG M 8 × 50 A4-50 250 643.10 

for profile: JXA W 64/44 


[mm] 

Pack Qty 

[Piece] 


€/100 Piece 


JXE M 20 × 60 hdg 8.8 50 1531.20 

JXE M 20 × 100 hdg 8.8 25 1815.80 

JXE M 20 × 150 hdg 8.8 25 2146.70 

JXE M 24 × 75 hdg 8.8 25 1726.15 

JXE M 24 × 100 hdg 8.8 25 1954.00 

JXE M 24 × 150 hdg 8.8 25 2398.90 


JXE M 20 × 50 FA-70 50 6667.35 

JXE M 20 × 100 FA-70 25 8971.30 

JXE M 24 × 50 FA-70 50 7076.80 

JXE M 24 × 100 FA-70 25 9460.30 

JXB 

41.6 

Breaking Point Bolts 

JB-SB, JH-SB 

60.0 

JB-SB for profiles: 

W 55/42, W 53/34, K 53/34, K 50/40, W 50/30, K 50/30, 

K 48/26 

JH-SB for profiles: 

K 38/17, K 36/36, K 36/20, W 38/23 


[mm] 

Pack Qty 

[Piece] 


JB M 12 x 60 - SB 20 zp 

JB M 12 x 60 - SB 25 zp 

Prices on 

JH M 12 x 60 - SB 20 zp 

request 

JH M 12 x 60 - SB 25 zp 


€/100 Piece 


request 



[mm] 

■ All prices incl. nuts; 

washers to be ordered separately 

l 

Pack Qty 

[Piece] 


€/100 Piece 


JXB M 16 × 60 hdg 8.8 50 1226.70 

JXB M 16 × 80 hdg 8.8 25 

JXB M 16 × 100 hdg 8.8 25 


JXB M 20 × 65 hdg 8.8 25 1420.50 

JXB M 20 × 80 hdg 8.8 25 1460.00 

JXB M 20 × 100 hdg 8.8 25 

JXB M 20 × 150 hdg 8.8 25 



JXB M 16 × 60 FA-70 25 5445.45 

JXB M 16 × 80 FA-70 25 

JXB M 16 × 100 FA-70 25 


JXB M 20 × 80 FA-70 25 6679.10 

JXB M 20 × 100 FA-70 25 

JXB M 20 × 150 FA-70 25 



JXH 

JZS 

28.9 

34.5 

l 

l 



[mm] 

Pack Qty 

[Piece] 


€/100 Piece 


JXH M 12 × 30 hdg 8.8 100 303.90 

JXH M 12 × 40 hdg 8.8 100 311.85 

JXH M 12 × 50 hdg 8.8 100 326.85 

JXH M 12 × 60 hdg 8.8 50 335.05 

JXH M 12 × 80 hdg 8.8 50 525.75 

JXH M 12 × 100 hdg 8.8 25 695.75 

JXH M 16 × 30 hdg 8.8 50 363.30 

JXH M 16 × 40 hdg 8.8 50 386.55 

JXH M 16 × 50 hdg 8.8 50 402.15 

JXH M 16 × 60 hdg 8.8 50 421.60 

JXH M 16 × 80 hdg 8.8 50 492.65 

JXH M 16 × 100 hdg 8.8 25 525.75 

JXH M 16 × 125 hdg 8.8 25 695.90 

JXH M 16 × 150 hdg 8.8 25 1311.05 

Stainless Steel, Quality FA-70 ( 1.4462 ) 

JXH M 12 × 40 FA-70 50 1402.10 

JXH M 12 × 60 FA-70 50 1494.60 

JXH M 12 × 80 FA-70 50 2345.95 

JXH M 16 × 60 FA-70 25 1550.05 

JXD 

for profile: JZA K 41/22 


[mm] 

Pack Qty 

[Piece] 


€/100 Piece 


JZS M 10 × 40 hdg 8.8 50 325.10 

JZS M 12 × 35 hdg 8.8 50 361.45 

JZS M 12 × 50 hdg 8.8 50 393.90 

JZS M 12 × 80 hdg 8.8 50 582.90 

JZS M 16 × 50 hdg 8.8 50 602.80 

JZS M 16 × 100 hdg 8.8 50 838.40 


JZS M 12 × 35 A4-50 50 2304.20 

JZS M 12 × 50 A4-50 50 2461.40 

JZS M 12 × 80 A4-50 50 2565.90 

JZS M 16 × 35 A4-50 25 2096.95 

JZS M 16 × 50 A4-50 25 2493.10 

JZS M 16 × 80 A4-50 25 3162.25 

JZS M 16 × 100 A4-50 25 3383.20 

Double-Notch Toothed Bolts 

JKB 

41.6 

20.9 

l 



[mm] 

Ordering Example Bolts 

l 

Pack Qty 

[Piece] 


€/100 Piece 


JXD M 10 × 40 hdg 8.8 100 210.80 

JXD M 12 × 30 hdg 8.8 100 231.50 

JXD M 12 × 40 hdg 8.8 100 250.50 

JXD M 12 × 50 hdg 8.8 100 269.60 

JXD M 12 × 60 hdg 8.8 100 273.85 

JXD M 12 × 80 hdg 8.8 100 321.20 

JXD M 12 × 100 hdg 8.8 50 389.45 

JXD M 12 × 125 hdg 8.8 50 540.90 

JXD M 12 × 150 hdg 8.8 25 1025.70 


JXD M 12 × 40 FA-70 50 1754.50 

JXD M 12 × 60 FA-70 50 1917.65 

JXD M 12 × 80 FA-70 50 2249.90 

Type Thread Length [mm] Material 

JH M 12 × 100 zp 

for profiles: W 50/30, W 53/34, W 55/42 


[mm] 

Pack Qty 

[Piece] 


€/100 Piece 


JKB M 16 × 40 hdg 8.8 50 507.30 

JKB M 16 × 60 hdg 8.8 50 575.00 

JKB M 16 × 80 hdg 8.8 25 618.50 

JKB M 20 × 45 hdg 8.8 25 628.00 

JKB M 20 × 60 hdg 8.8 25 638.80 

JKB M 20 × 80 hdg 8.8 25 683.70 

JKC 

30.1 

for profile: W 40/22 


[mm] 

l 

Pack Qty 

[Piece] 


€/100 Piece 


JKC M 16 × 40 hdg 8.8 50 388.15 

JKC M 16 × 60 hdg 8.8 50 439.45 

JKC M 16 × 80 hdg 8.8 25 513.05 

1 ) Description of FA also applies to F4 (1.4462) 



SHEAR 


SHEAR 


FACADE 




Hook-head Locking Plates JGM (forged) 

h 

h 

h 

For Profile 

JGM A 

W 72/48 

K 72/48 

l b 

JGM B W 55/42 

W 53/34 

K 53/34 

K 50/40 

W 50/30 

l b K 50/30 

K 48/26 

JGM C 

W 40/22 

K 40/25 

K 40/22 

l b 

Thread 

Material M 6 M 8 M 10 M 12 M 16 M 20 

Price € / 100 Piece 

I × b × h [mm] – – – – – 57 × 31 × 22 

Pack Qty – – – – – 50 

zp 

A4 

on request 

I × b × h [mm] 41 × 21 × 16 41 × 21 × 16 41 × 21 × 16 41 × 21 × 16 41 × 26 × 16 – 

Pack Qty 100 100 100 100 100 – 

zp 232.95 232.95 232.95 232.95 351.45 – 

A4 1459.55 1459.55 1459.55 1459.55 1459.55 – 

I × b × h [mm] 32 × 17 × 11 32 × 17 × 11 32 × 17 × 11 32 × 17 × 11 32 × 23 × 13 – 

Pack Qty 250 250 250 250 250 – 

zp 185.05 185.05 185.05 204.20 287.30 – 

A4 1411.05 1411.05 1411.05 1435.25 1435.25 – 

Hammer-head Locking Plates JGM (flat steel) 

b 

JGM H 

l 

JGM D 

JGM G 

h 

For Profile 

K 38/17 

K 36/36 

K 36/20 

K 28/15 

K 28/28 

K 28/12 

K 21/12 

Thread 



I × b × h [mm] – 30 × 14 × 6 30 × 14 × 6 30 × 14 × 6 30 × 18 × 8 30 × 18 × 8 

Pack Qty – 500 500 500 300 300 

zp – 85.25 85.25 85.25 85.25 85.25 

A4 – – 775.70 775.70 775.70 775.70 

I × b × h [mm] 21 × 12 × 4 21 × 12 × 4 21 × 12 × 4 21 × 12 × 6 18 × 14 × 6 – 

Pack Qty 1000 1000 1000 1000 1000 – 

zp 40.85 40.85 40.85 40.85 40.85 – 

Pack Qty 400 400 400 400 1000 – 

A4 512.05 512.05 512.05 512.05 512.05 – 

I × b × h [mm] 16 × 12 × 4 16 × 12 × 4 16 × 12 × 4 16 × 12 × 6 – – 

Pack Qty 1000 1000 1000 1000 – – 

zp 39.65 39.65 39.65 39.65 – – 

A4 – 444.90 444.90 444.90 – – 

Channel Nuts JAM 

JAM 22 

h 

b 

l 

JAM F 22 mit Feder 

h 

b 

l 

For Profile 

K 41/41 

K 41/41 

Thread 

Material 

M 6 M 8 M 10 M 12 


I × b × h [mm] 35 × 20 × 6 35 × 20 × 6 30 × 18 × 8 35 × 20 × 9,5 

Pack Qty 500 500 500 500 

zp 75.60 82.50 95.10 105.35 

hdg 97.30 104.30 118.10 128.45 

I × b × h [mm] 35 × 20 × 6 35 × 20 × 6 35 × 20 × 8 35 × 20 × 9,5 

Pack Qty 500 500 500 500 

zp 91.95 98.65 106.50 120.40 

hdg 110.25 117.00 127.05 146.50 

Notch Toothed Bolts JKZS 

Type 

Material 

For 

Bolts 

Price €/ 

100 

Piece 

M 16 hdg M 16; 8.8 305.00 


Hexagon Bolts DIN EN ISO 4032 (DIN 934) 

Thread 

Material M 6 M 8 M 10 M 12 M 16 M 20 M 24 

Price €/100 Piece 

zp 2.60 4.90 9.90 16.00 28.40 57.60 112.00 

A4 9.70 18.30 42.25 64.75 117.65 227.75 560.65 

Washer DIN EN ISO 7089 (DIN 125) (without chamfer) 

Internal Diameter [mm] 

Material 

6,4 8,4 10,5 13 17 21 25 28 31 

M 6 M 8 M 10 M 12 M 16 M 20 M 24 M 28 M 31 


zp 2.55 3.85 6.45 7.65 13.90 27.15 39.25 – – 

A4 9.10 14.85 25.55 43.10 78.50 115.80 163.00 – – 

hdg 8.8 

4.20 6.38 10.65 12.60 22.95 44.85 64.80 91.10 112.05 

zp 8.8 

200 

HV 

2.80 4.25 7.10 8.40 15.30 29.90 43.20 67.30 72.80 

A4-70 11.85 19.30 33.20 56.05 102.05 150.50 211.90 315.60 378.50 

Washer DIN EN ISO 7093-1 (DIN 9021) 

Internal Diameter [mm] 

Material 6,4 8,4 10,5 13 17 22 


zp 6.90 9.10 12.60 22.10 37.30 112.10 

A4 30.40 40.20 54.15 108.15 137.40 386.00 

Spring Washer DIN 127 

Material 

A 6 A 8 A 10 A 12 A 16 A 20 A 24 


zp 2.60 2.90 4.45 6.75 13.95 22.35 48.45 

A4 10.05 19.90 31.35 43.40 105.40 149.80 – 

Hexagonal Coupling Sleeve 

s 

e 

L 

Thread × Length [mm] 

Material M 6 × 15 M 8 × 20 M 10 × 25 M 12 × 30 M 16 × 40 M 20 × 50 


zp 46.60 70.35 192.10 223.30 339.90 496.00 

A4 


Coupling Sleeve Round 

D 

L 

Thread × Length [mm] 

Material M 6 × 20 M 8 × 20 M 10 × 25 M 12 × 30 M 16 × 40 M 20 × 50 


zp 42.05 57.80 93.75 149.05 239.05 419.10 

A4 


Self Locking Nut with Serrated Bearing 

Material 

zp 

Thread 

M 12 M 16 




SHEAR 


SHEAR 


FACADE 




Clamp Connections JSV Material A4 

JSV 

SP 

Type 

Load Category 

F Rd [kN] 

Sleeve 

Bolt Left-hand 

Thread 

Bolt Right-hand 

Thread 


€/Piece 

JSV–28–1 

SP 10 x 50 JDL–M 10 × 50 JD–M 10 × 40 38.90 

4.9 

JSV–28–2 SP 10 x 80 JDL–M 10 × 50 JD–M 10 × 60 41.50 

JSV–38–1 

SP 12 x 50 JHL–M 12 × 50 JH–M 12 × 50 53.35 

JSV–38–2 7.0 SP 12 x 80 JHL–M 12 × 50 JH–M 12 × 60 56.25 

JSV–38–3 SP 12 x 80 JHL–M 12 × 50 JH–M 12 × 100 61.15 

JSV–38–4 

SP 16 x 50 JHL–M 16 × 50 JH–M 16 × 50 75.30 

JSV–38–5 9.8 SP 16 x 80 JHL–M 16 × 50 JH–M 16 × 80 82.25 

JSV–38–6 SP 16 x 80 JHL–M 16 × 50 JH–M 16 × 100 84.75 

JSV–40–1 

SP 16 x 50 JCL–M 16 × 50 JC–M 16 × 60 83.95 

JSV–40–2 11.2 SP 16 x 80 JCL–M 16 × 50 JC–M 16 × 60 87.25 

JSV–40–3 SP 16 x 80 JCL–M 16 × 50 JC–M 16 × 100 104.95 

Turnbuckle SP Material A4 

(with right/ 

left thread 

and hole) 

SP 10 × 50 SP 10 × 80 SP 12 × 50 SP 12 × 80 SP 16 × 50 SP 16 × 80 


1870.70 2020.55 2254.05 2409.05 3213.05 3529.95 

Eyelet Socket ÖM 

Material 

M 8 × 50 M 10 × 50 M 12 × 60 M 16 × 80 M 20 × 100 


zp 105.75 109.20 118.90 255.90 377.60 

A4 


Ring Nuts RM DIN 582 

Threaded Rods GS ( Length L = 1.000 mm ) 

Pressure Bolt JDS Material A4 

Thread 



roh 179.05 283.40 386.75 522.40 731.30 1506.55 

zp 251.00 332.65 434.80 609.00 874.30 1886.80 

Thread 



zp 116.60 134.60 208.90 297.90 615.00 905.45 

A4 828.00 1282.00 2010.75 3031.30 4969.20 8052.10 

Thread 

JDS 

Bolt Length [mm] 

M 10 M 12 M 16 M 20 

€/Piece 

80 9.15 10.55 16.75 29.55 

100 9.15 10.55 16.75 29.55 

120 9.15 10.55 16.75 29.55 

140 9.15 10.55 16.75 29.55 

160 9.50 10.55 16.75 29.55 

180 9.75 11.55 17.55 32.50 

200 10.55 11.55 17.55 32.50 

220 / 240 Prices on request 

round plastic sleeve sleeve length 80 mm 1.05 1.10 1.20 1.20 


Toothed Straps JVB-Z 1 ) (toothed) 

Type JVB-Z 

L 

LL 

counter 

plate 

Series 

12 

For Profile 

K 28/15 

18 

For Profile 

K 38/17 

Load 

Category 

F Rd [kN] 

4.9 

9.8 

JVB-L-Z/Series 

Slot Size 

€/Piece 

Material 

zp A4 

JVB– 90–Z/12 LL 11 × 55 8.50 13.30 

JVB– 115–Z/12 LL 11 × 55 8.70 15.30 

JVB– 140–Z/12 LL 11 × 55 8.70 15.80 

JVB– 165–Z/12 LL 11 × 55 8.85 16.35 

JVB– 190–Z/12 LL 11 × 55 9.00 16.45 

JVB– 215–Z/12 LL 11 × 55 9.10 17.15 

JVB– 240–Z/12 LL 11 × 55 9.15 17.90 

JVB– 115–Z/18 LL 13 × 55 9.85 18.60 

JVB– 140–Z/18 LL 13 × 55 9.90 19.05 

JVB– 165–Z/18 LL 13 × 55 9.95 19.45 

JVB– 190–Z/18 LL 13 × 55 10.05 20.35 

JVB– 215–Z/18 LL 13 × 55 10.35 20.90 

JVB– 240–Z/18 LL 13 × 55 10.55 21.95 

Toothed Straps JVB-ZS 1 ) (toothed with bolt) 

Typ JVB-ZS 

L 

LL 

counter 

plate 

Serie 

12 

For Profile 

K 28/15 

18 

For Profile 

K 38/17 

Load Category 

F Rd [kN] 

4,9 

9,8 

JVB-L-ZS/Serie 

Slot Size 

€/Piece 

Material 

zp A4 

JVB– 115–ZS/12 LL 11 × 55 14.70 28.90 

JVB– 140–ZS/12 LL 11 × 55 14.80 29.50 

JVB– 165–ZS/12 LL 11 × 55 14.85 30.35 

JVB– 190–ZS/12 LL 11 × 55 15.20 30.65 

JVB– 215–ZS/12 LL 11 × 55 15.25 31.60 

JVB– 140–ZS/18 LL 13 × 55 16.90 38.60 

JVB– 165–ZS/18 LL 13 × 55 17.20 38.95 

JVB– 190–ZS/18 LL 13 × 55 17.70 40.50 

JVB– 215–ZS/18 LL 13 × 55 17.75 40.95 

1 ) Price incl. counter plate 30 × 30 mm 

End Anchors for Anchor Channels 

JE Type Corresponding 


Pack Qty 

[Piece] 

Bolt 

Thread 

€/Piece 

Material 

zp A4 

JE 1 JTA K 28/15 25 M 8 3.55 7.50 

JTA K 38/17 

JE 2 

JTA W 40/22 

JTA K 40/25 

25 M 10 4.05 8.80 


■ zp = S 235 JR, zinc-plated 




SHEAR 


SHEAR 


FACADE 




Clamping Plates for Crane Rails 

Other diameters on request. 

Material 

KP-A 45 KP-A 55 KP-A 65 KP-A 75 


Diameter 22 mm 

18 mm/ 

22 mm 

22 mm 

22 mm 

hdg 832.25 882.70 933.15 971.40 

Clamping Plates DIN 3568 

Ordering Example Clamping Plates DIN 3568 

Type 

Material 

KP – 60/10 – hdg 

Material 

KP 50/7 KP 60/10 KP 60/12 KP 60/14 KP 60/16 KP 60/18 KP 60/20 


Slot Size LL 14 × 20 LL 18 × 24 LL 18 × 24 LL 18 × 24 LL 18 × 24 LL 18 × 24 LL 18 × 24 

hdg 723.50 794.95 809.45 824.90 839.35 855.00 870.65 

Clamping Claw and Adaptor 

Material 


hdg 

SKUA 

SKUS 

Set consists of clamping claw SKUS and adaptor 

SKUA 

for clamping level 5-40 mm 

for bolts M 12 8.8 

764.80 

Material 

■ hdg = hot-dip galvanized 


Frame Shoes 

JG 

Type JG-A 2.5 JG-K 4 1 ) JG-K 9 1 ) JG-K 12 1 ) 

Colour grey yellow grey red 

Hole [mm] 1 × 11 2 × 11 4 × 14 4 × 14 

Frame Shoe €/Piece 17.30 21.55 26.80 35.65 

Type JG-H 2,5 1 ) JG-H 5 1 ) 2) JG-H 9 1 ) 2) JG-L 2.5 1 ) 

Colour grey blue blue grey 

Frame Shoe €/Piece 26.95 34.65 34.65 21.25 

Associated Sleeve 

Sleeve Dimension 25 × 25 × 95 PE 30 × 30 × 95 PE 30 × 30 × 105 hdg 25 × 25 × 95 PE 

Frame Sleeve €/Piece 2.70 2.95 9.40 2.70 

Frame shoes for square timber widths: 10 cm (12 cm on request) 

1) type-examination tested 

2) The frame shoes JG-H 5 and JG-H 9 are identically constructed 


■ Frame shoe – steel 1.0038 colour coated 

■ Sleeve St – steel 1.0038 

■ Sleeve PE – plastic 

Ordering Example Frame Shoe 

Type 

JG-K 4 



SHEAR 


SHEAR 


FACADE 



Brick Ties 

Brick Ties Channels / Anchor Channels 

Kt 25/15-D 1 ) 

Brick Tie Anchor: Series 12 

Weight: 0.34 kg/m 

JTA K 28/15 2 ) 



JTA K 38/17 2 ) 



2,3 

3 

15 

12 

15 

18 

17 

25 

28 

38 

Anchor 

[Piece/m] 

Material 

€/m 

A4 

sv 

6/m 3.10 13.85 

Anchor 

[Piece/M] 

Material 

€/m 

hdg 

A4 

4/m 16.10 58.05 

Fixed Length 

Surcharge 

10% 10% 

Anchor 

[Piece/M] 

Material 

€/m 

hdg 

A4 

4/m 21.50 87.00 

Fixed Length 

Surcharge 

10% 10% 

Brick Tie Anchor 

JMA 

Series 12 Type JMA-.../12 3 ) 

for profiles: Kt 25/15-D, K 28/15 

Series 18 Type JMA-.../18 3 ) 


Thin-Bed Brick Tie 

Anchors JMA-D 

Series 12 Type JMA-...-D/12 3 ) 


L 1 = 20 

L 2 

b 

L 1 = 20 

L 2 

30 

L 

25 

Length L2 

[mm] 

Material 

€/100 Piece 

hdg A4 

85 66.15 303.10 

120 75.60 369.95 

180 105.75 456.20 

300 195.75 670.85 

1 ) Pack.-unit 1 bundle = 100 pieces stock length 

= 2,500 and 5,000 mm (-0/+50 mm) no fixed 

length 

2) stock length: see page 7 

3) Pack.-unit = 100 pieces 

Sliding Sleeve 

JMA-G 150 / 12 4 ) 

Length L2 

[mm] 

Material 

€/100 Piece 

hdg A4 

85 79.25 375.70 

120 96.00 416.75 

180 128.55 491.65 

300 228.15 744.05 

Length L 

[mm] 

Material 

€/100 Piece 

A2 

125 190.95 

185 218.70 

245 246.65 

■ All prices incl. foamfilling and 

nailholes 

■ Fixed length: 

1,050 mm < L < 6,000 mm 

■ K 38/17 also with anchor height h 

ca. 30 mm, without official approval 

(price on request) 

■ Weight per metre valid for mill 

finish channel (for galvanized profiles: 

weight per metre +10 %) 

€ / 100 Piece 126.20 

4 ) for JMA 120/12 


■ K = cold formed 

■ hdg = hot-dip galvanized 

1.0038 

■ sv = pre-galvanized 1.0038 

■ A2 = stainless steel, 

1.4301/1.4541 

■ A4 = stainless steel, 

1.4401/1.4404/1.4571 


Brick Tie Anchor JMA-Q and JMA-QE 

Series 12 

Type JMA-... × ...-Q/12 Type JMA-... × ...-QE/12 


Series 18 

Type JMA-... × ...-Q/18 Type JMA-... × ...-QE/18 


L 1 

= 20 mm 

L 2 

L 1 

= 20 mm 

L 2 

L 1 

= 20 mm 

L 1 

= 20 mm 

L 2 

L 3 

L 3 

L 2 

30 

L 3 

L 3 

25 

25 

30 

Length L 2 

[mm] 

Length L 3 

[mm] 

Material 

€/100 Piece 

hdg 

A4 

85 

767.30 1207.00 

120 786.80 1271.55 

120 

180 821.00 1389.55 

300 958.35 1889.45 

85 

806.25 1330.40 

120 821.00 1389.55 

180 

180 860.15 1507.60 

300 978.75 1973.45 

85 

947.60 1838.80 

120 958.35 1889.45 

300 

180 978.75 1963.80 

300 1128.80 2494.70 

Ordering Example Brick Tie Anchor 

Type Length L 2 × L 3 Series Material 

JMA – 85 × 120 – QE / 12 – hdg 

Length L 2 

[mm] 

Length L 3 

[mm] 

Material 

€/100 Piece 

hdg 

A4 

822.40 1368.05 

85 

120 845.55 1458.95 

120 

180 901.40 1658.90 

300 1005.20 2007.05 

85 

873.45 1568.05 

120 901.35 1658.90 

180 

180 957.10 1854.30 

300 1030.35 2110.10 

85 

990.80 1947.30 

120 1005.20 2007.05 

300 

180 1030.35 2109.90 

300 1161.45 2518.05 

Ordering Example Brick Tie Anchor 

Type Length Series Material 

JMA – 180 – 12 – A4 

Timber Fixing Strap 

Series 12 Typ JNA-.../12 1 ) 


Series 18 Typ JNA-.../18 1 ) 


L 

35 

L 

35 

Length L 

[mm] 

Material 

€/100 Piece 

hdg 

100 140.50 

130 163.35 

200 215.00 

Length L 

[mm] 

Material 

€/100 Piece 

hdg 

100 140.50 

130 163.35 

200 215.00 

1 ) Pack Qty = 100 pieces 



SHEAR 


SHEAR 


FACADE 



Studrails, Shear Reinforcement 

Studrails JDA, Shear Reinforcement JDA-S with 2 Anchors 

Reinforcing Element JDA 

Diameter Anchor d A [mm] 

( General Technical Approval Z-15.1-214 ) Anchor length 

h A 10 12 14 16 20 25 

Reinforcing Element JDA-S 

[mm] 

( General Technical Approval Z-15.1-268 ) Price € / Piece 

h A 

235 9.50 10.50 11.25 12.65 15.25 – 

125 9.10 10.05 – – – – 

135 9.10 10.05 – – – – 

145 9.10 10.10 10.75 – – – 

155 9.15 10.10 10.85 12.10 – – 

l L 

165 9.15 10.10 10.85 12.10 – – 

175 9.25 10.25 10.85 12.15 – – 

2 Anchor 

185 9.35 10.25 10.90 12.25 14.95 – 

195 9.35 10.30 10.90 12.25 14.95 – 

d A 

205 9.35 10.30 11.00 12.30 15.05 – 

215 9.40 10.35 11.05 12.40 15.10 – 

225 9.40 10.35 11.05 12.40 15.10 – 

245 9.50 10.55 11.25 12.65 15.35 21.85 

255 9.50 10.55 11.25 12.65 15.40 21.85 

265 9.55 10.70 11.35 12.70 15.40 21.85 

275 9.65 10.75 11.45 12.80 15.55 21.95 

285 9.80 10.75 11.55 12.85 15.65 21.95 

295 10.00 10.80 11.55 13.05 15.70 22.05 

305 10.00 10.80 11.60 13.10 15.80 22.10 

315 10.05 10.85 11.65 13.15 15.90 22.25 

325 10.10 11.00 11.70 13.15 15.95 22.35 

Assembly Aid JDA – Q 

335 10.20 11.05 11.85 13.20 16.00 22.50 

345 10.25 11.15 11.85 13.25 16.15 22.55 

355 10.30 11.30 12.00 13.35 16.25 22.60 

365 10.35 11.35 12.00 13.35 16.30 22.60 

375 10.50 11.45 12.05 13.45 16.45 22.85 

385 10.55 11.45 12.25 13.50 16.60 23.00 

395 10.65 11.55 12.30 13.55 16.60 23.05 

405 10.70 11.65 12.35 13.65 17.55 24.15 

415 10.80 11.70 12.40 13.80 17.75 24.20 

425 10.85 11.85 12.40 13.90 17.80 24.25 

€ / Piece 

0,95 

435 10.85 11.85 12.65 14.00 17.85 24.50 

445 10.90 11.95 12.65 14.00 18.00 24.55 

455 11.05 12.00 12.70 14.10 18.15 24.65 

465 11.05 12.00 12.80 14.20 18.25 24.90 

475 11.15 12.15 12.85 14.20 18.35 25.00 

Price Calculation for Multi-anchors: 

485 11.25 12.30 12.85 14.25 18.60 25.05 

Price = Price JDA with 2 Anchors × Factor 

495 11.35 12.30 13.10 14.35 18.65 25.10 

Anchor Number 

Factor 

505 11.45 12.35 13.15 14.40 18.80 25.45 

4 2,0 

515 11.55 12.40 13.20 14.45 18.90 25.60 

5 2,5 

525 11.60 12.45 13.25 14.60 19.05 25.80 

6 3,0 

535 11.70 12.65 13.35 14.65 19.20 25.95 

7 3,5 

545 11.80 12.65 13.45 14.75 19.40 26.10 

8 4,0 

555 11.85 12.70 13.55 14.85 19.45 26.20 

565 11.85 12.85 13.55 14.95 19.60 26.35 

575 11.95 12.85 13.60 15.00 19.70 26.45 

585 12.00 13.05 13.80 15.05 19.75 26.55 

Material 

595 12.00 13.10 13.90 15.10 19.85 26.70 

■ BSt 500 S 

605 12.05 13.15 13.90 15.10 20.15 26.95 

■ Bars of structural steel 

615 12.30 13.20 14.00 15.35 20.20 27.15 

625 12.30 13.25 14.10 15.40 20.30 27.25 

635 12.35 13.35 14.15 15.55 20.40 27.40 

Ordering Example Studrails 

645 12.40 13.45 14.20 15.60 20.60 27.55 

655 12.45 13.50 14.25 15.65 20.75 27.60 

665 12.60 13.55 14.35 15.80 20.80 27.75 

Type No. of Anchor d A Anchor Strip 

675 12.65 13.55 14.35 15.80 20.95 27.80 

Anchors 

Height h A Length l L 

685 12.70 13.60 14.45 15.85 21.00 27.85 

JDA – 2 – 14 – 225 – 340 

695 12.75 13.65 14.60 15.90 21.10 28.00 


Studrails JDA, Shear Reinforcement JDA-S with 3 Anchors 

A 

Reinforcing Element JDA 

Diameter Anchor d A [mm] 

( General Technical Approval Z-15.1-214 ) Anchor length 

h A 10 12 14 16 20 25 

Reinforcing Element JDA-S 

[mm] 

( General Technical Approval Z-15.1-268 ) Price € / Piece 

255 14.25 15.80 16.80 18.95 23.05 32.70 

125 13.55 15.00 – – – – 

3 Anchors 

135 13.55 15.00 – – – – 

145 13.55 15.10 16.15 – – – 

155 13.65 15.10 16.25 18.00 – – 

165 13.80 15.10 16.25 18.00 – – 

l L 

175 13.90 15.40 16.30 18.05 – – 

185 14.00 15.40 16.45 18.15 22.35 – 

195 14.00 15.40 16.60 18.30 22.40 – 

d A 

205 14.00 15.40 16.60 18.40 22.50 – 

215 14.15 15.55 16.65 18.60 22.65 – 

225 14.15 15.55 16.65 18.80 22.75 – 

235 14.20 15.70 16.80 18.90 22.95 – 

h 

245 14.25 15.80 16.80 18.90 23.00 32.70 

265 14.40 16.00 17.10 19.05 23.10 32.70 

275 14.45 16.15 17.20 19.20 23.25 32.85 

285 14.65 16.15 17.20 19.40 23.45 33.00 

295 14.90 16.20 17.20 19.45 23.65 33.10 

305 15.00 16.20 17.30 19.50 23.75 33.20 

315 15.00 16.30 17.40 19.65 23.85 33.45 

325 15.10 16.60 17.45 19.75 23.90 33.50 

335 15.25 16.60 17.75 19.75 24.05 33.70 

345 15.40 16.70 17.75 19.85 24.10 33.85 

355 15.40 17.05 18.00 19.85 24.25 33.85 

Spacers Material €/Piece 

365 15.55 17.10 18.15 20.00 24.55 34.05 

For in-situ concrete use 

375 15.70 17.20 18.20 20.20 24.65 34.25 

AH-DA 15/20 Plastic 

385 15.80 17.20 18.30 20.20 24.85 34.45 

AH-DA 25 

Plastic 


395 15.90 17.20 18.35 20.30 24.95 34.60 

AH-DA 30 

Plastic 

request 

405 16.00 17.40 18.60 20.60 26.40 36.15 

AH-DA 35 

Plastic 

415 16.20 17.45 18.60 20.70 26.55 36.40 

For pre-cast concrete use 

425 16.25 17.75 18.80 20.75 26.65 36.40 

FBA 15 

Fibre concrete 

435 16.30 17.75 18.90 20.95 26.70 36.60 

FBA 20 


445 16.45 17.90 18.95 21.00 27.00 36.85 


FBA 25 


455 16.60 18.00 19.05 21.05 27.25 37.00 

request 

FBA 30 


465 16.65 18.15 19.20 21.30 27.40 37.25 

AH-FT 

Plastic 

475 16.70 18.20 19.35 21.40 27.55 37.50 

485 16.80 18.35 19.40 21.50 27.80 37.60 

495 17.10 18.35 19.50 21,55 28.05 37.85 

505 17.20 18.60 19.75 21.65 28.10 38.20 

515 17.20 18.60 19.75 21.80 28.35 38.45 

525 17.30 18.80 19.85 21.85 28.60 38.60 

535 17.45 18.90 20.00 21.90 28.75 38.95 

Material 

545 17.55 18.95 20.20 22.05 29.00 39.15 

555 17.75 19.05 20.30 22.15 29.15 39.35 

■ BSt 500 S 

565 17.75 19.35 20.35 22.35 29.35 39.50 

■ Bars of structural steel 

575 17.90 19.40 20.55 22.50 29.55 39.65 

585 18.00 19.45 20.70 22.60 29.65 39.95 

595 18.15 19.50 20.75 22.70 29.80 40.10 

605 18.20 19.75 20.85 22.75 30.20 40.35 

615 18.35 19.75 21.00 23.00 30.35 40.60 

625 18.40 19.85 21.05 23.10 30.45 40.95 

Ordering Example Studrails 

635 18.60 19.85 21.20 23.25 30.70 41.10 

645 18.60 20.20 21.40 23.35 30.85 41.25 

Type 

655 18.80 20.20 21.50 23.45 31.10 41.40 

No. of Anchor d A Anchor Strip 

665 18.90 20.30 21.55 23.65 31.30 41.55 

Anchors 

Height h A Length l L 

675 18.95 20.35 21.65 23.75 31.50 41.70 

JDA – 3 – 14 – 225 – 510 

685 19.05 20.55 21.85 23.80 31.65 41.95 

Other lengths on request. 

695 19.20 20.55 21.95 23.90 31.90 42.25 



SHEAR 


SHEAR 


FACADE 



Shear Connector 

Material Stainless Steel 

( General Technical Approval Z-15.7-237 ) 

Double Shear Connector JDSD 

Fire Protection Collars JBRM 

Socket 

(Sliding Tube) 

Dowel 

Type 

Dowel 

Price €/Piece 

Socket 

(Sliding Tube) 

Dowel + 

Socket 

JDSD 20 HF 56.05 24.75 80.80 

JDSD 25 HF 70.30 33.05 103.35 

JDSD 30 HF 87.90 37.35 125.30 

JDSD 45 HF 101.10 43.20 144.35 

JDSD 60 HF 116.75 48.40 165.15 

JDSD 90 HF 216.30 66.85 283.20 

JDSD 120 HF 260.30 101.50 361.80 

JDSD 130 300.20 167.85 468.05 

JDSD 150 486.00 211.15 697.10 

JDSD 400 1097.30 322.95 1420.30 

JDSD 450 1681.40 343.90 2025.30 


Type 

Joint width 

20 mm 30 mm 

JBRM 20 6.70 7.50 

JBRM 25 6.70 7.50 

JBRM 30 6.70 7.50 

JBRM 45 8.35 8.70 

JBRM 60 8.70 9.85 

JBRM 90 10.40 11.35 

JBRM 120 11.70 12.65 

JBRM 130 12.40 13.45 

JBRM 150 13.10 14.25 

JBRM 400 17.85 19.10 

JBRM 450 21.25 22.95 

Ordering Example Double Shear Connector JDSD 60 HF 

complete (dowel element and sleeve) 

Type 

JDSD 

Size 

60 HF 

Ordering Example Fire Protection Collars for Double 

Shear Connector JDSD 60 HF in 20 mm building joint 

Type of 

Dowel 

Size of Dowel 

Fire Protection 

Collar 

Joint width 

[mm] 

JDSD 60 HF – JBRM – 20 


Double Shear Connector JDSDQ 

Fire Protection Collars JBRMQ 

Socket 

(rectangular 

sliding tube) 

Dowel 


Type 

Socket 

Dowel + 

Dowel (rectangular 

Socket 

tube) 

JDSDQ 25 HF 70.30 67.55 137.80 

JDSDQ 30 HF 87.90 75.10 163.00 

JDSDQ 45 HF 101.10 82.00 183.15 

JDSDQ 60 HF 116.75 99.45 216.20 

JDSDQ 90 HF 216.30 164.80 381.15 

JDSDQ 120 HF 260.30 241.45 501.75 

JDSDQ 130 300.20 311.85 612.05 

JDSDQ 150 486.00 432.60 918.55 

JDSDQ 400 1097.30 804.70 1902.00 

JDSDQ 450 1681.40 1003.30 2684.70 


Type 

Joint width 

20 mm 30 mm 

JBRMQ 25 7.75 8.35 

JBRMQ 30 7.75 8.35 

JBRMQ 45 8.70 9.85 

JBRMQ 60 11.70 12.50 

JBRMQ 90 12.25 14.00 

JBRMQ 120 13.20 15.05 

JBRMQ 130 14.35 16.65 

JBRMQ 150 15.40 18.25 

JBRMQ 400 21.00 24.10 

JBRMQ 450 24.90 27.95 

Ordering Example Double Shear Connector JDSDQ 60 HF 

complete (dowel element and sleeve) 

Type 

JDSDQ 

Size 

60 HF 

Ordering Example Fire Protection Collars for Double 

Shear Connector JDSDQ 60 HF in 20 mm building joint 

Type of 

Dowel 

Size of Dowel 

Fire Protection 

Collar 

Joint width 

[mm] 

JDSDQ 60 HF – JBRMQ – 20 



SHEAR 


SHEAR 


FACADE 



Brickwork Support Brackets 

Scope of Supply 

■ JORDAHL ® bracket 

■ Oblique perforated plate 

■ Clamping plate (U-plate) 

JVA+ N, JVA+ NA, JVA+ NU 

JVA+ N JVA+ NA JVA+ NU 

Offset Height 

100 mm 

Ordering Example Support Brackets JVA+ NA 

cantilevered length 150 mm, load category 3.5; 

offset 100 mm 

Type 

Load Category 

Cantilevered 

Length 

Type 

Load 

Category 

Offset 

JVA+ 150 – NA / 3.5 A = 100 

Intermediate and special sizes available on request. 

Cantilevered Length 

L [mm] 

3.5 130 – 390 

7.0 130 – 390 

10.5 130 – 390 


€/Piece 


Angled Bracket JW 

Angled Bracket JW 

Ordering Example Angled Bracket JW 

Type Angled Length Angled Dimensions 

H W × B W × S W 

JW – 980 L 50 × 90 × 3 

Spezial Sizes and angled dimensions on request. 

Angled Dimensions 

H W × B W × S W [mm] 

Length 

[mm] 

25 × 90 × 2 480 

30 × 90 × 3 730 

50 × 90 × 3 980 


€/Piece 


Brickwork Support Brackets JVA+ P and PAR 

JVA+ P 

Load Category Cantilevered Length 

L [mm] 

3.5 130 – 390 

7.0 130 – 390 

10.5 130 – 390 

JVA+ PAR 

Offset Height 

100 mm 


€/Piece 


Ordering Example Brickwork Support Brackets JVA + PAR 


offset 100 mm 

Type 

Cantilevered 

Length 



Type 

Load 

Category 

■ Stainless steel corrosion resistance class III 

Offset 

JVA+ 150 – PAR / 3.5 A = 100 


Brickwork Support Brackets JVA+ E und EA 

JVA+ E 

JVA+ EA 

Offset Height 

100 mm 

Ordering Example Brickwork Support Brackets JVA+ EA 

JVA+ EA cantilevered length 150 mm, load category 3.5; 

offset 100 mm 

Type 

Cantilevered 

Length 

Type 

Load 

Category 

Offset 

JVA+ 150 – EA / 3.5 A = 100 


Load 

Category 

Cantilevered Length 

L [mm] 

1.8 150 – 390 

3.5 150 – 390 

7.0 150 – 390 


€/Piece 


Brickwork Support Brackets JVA+ F und FAR 

JVA+ F 

JVA+ FAR 

Ordering Example Brickwork Support Brackets JVA+ F 


angle length 1,250 mm, choosen support angle 

(L 70 × 100 × 3) 

Load 

Category 

Cantilevered 

Length L [mm] 

Length [mm] 

3.5 130 – 390 1000 

3.5 130 – 390 1250 

3.5 130 – 390 1500 

Offset Height 

100 mm 


€/Piece 


Type 

Cantilevered 

Length L 

Angled Type Load 

Length L W Category 

Angle 

Dimensions 

JVA + 190 – 1250 – F / 7.0 ( L 70 × 100 × 3 ) 

Suspension Loop JRH 

Stainless Steel Wire ESD 

B 

JRH O 

JRH 

B W 

B W S 

H W 

S W 

Type 

 

[mm] 

Length 

[mm] 

Ordering Example Suspension Loop JRH 

for L 70 × 100 ×3, thickness 115 mm 


€/m 

ESD 4 3000 Prices on request 

Type 

for Angle Dimensions 

H W × B W × S W [mm] 

JRH 0/11.5 for JVA + N, NA + NU 

JRH 1/11.5 30–35 × 80–100 × 3–8 

JRH 2/11.5 40–45 × 80–100 × 3–8 

JRH 3/11.5 50–55 × 80–100 × 3–8 

JRH 4/11.5 60–65 × 80–100 × 3–8 

JRH 5/11.5 70–75 × 80–100 × 3–8 

JRH 6/11.5 80–85 × 80–100 × 3–8 

JRH 7/11.5 90–95 × 80–100 × 3–8 


€/Piece 


request 

Type 

Thickness 

JRH 5 / 11.5 

Other designs are available on request. 



SHEAR 


SHEAR 


FACADE 

FASSADENBEFESTIGUNG 



Brickwork Support Brackets 

Brickwork Support Brackets JVA+ NFT, JVA+ NAFT 

JVA+ NFT 

Load Category Cantilevered 

Length L [mm] 

3.5 130 – 390 

7.0 130 – 390 

10.5 130 – 390 

JVA+ NAFT 

Offset Height 

100 mm 


€/Piece 


Ordering Example Brickwork Support Brackets JVA+ NAFT 


offset 100 mm 

Type 

Cantilevered 

Length 


Type 

Load 

Category 


Offset 

JVA+ 190 – NAFT / 7.0 A = 100 


Prefabricated Part Holder JFT 

JFT 

Threaded Loop JGS 

JGS 

Type 

JFT–K 28/15 

JFT–K 38/17 

JFT–K 50/30 



Type 

JGS M 8 

JGS M 10 

Ordering Example Threaded Loop JGS 

for load Category 7.0 



Type 

Thread 

JGS M 8 


Angled Support Brackets L-DF+, L-DN+ and L-F+ 

L-DF+ / L-DN+ 1 ) 

L-F+ 

Load 

Categ. 

Cantilevered 

Length L [mm] 

1.5 130 – 330 

3.2 130 – 330 

1 ) L-DN+ not shown 


L W = 500 mm L W = 750 mm L W = 1000 mm 


Load 

Categ. 

Cantilevered 

Length L [mm] 

1.2 110 – 130 

2.1 110 – 130 

3.2 110 – 130 


L W = 500 mm L W = 750 mm L W = 1000 mm 


Ordering Example Angled Support Bracket L-DF+ 

cantilevered length = 190 mm, load category 3.2; 

angle length = 1,000 mm 

Type Cantil. Length L Angled Length L W Load Category 

L-DF+ 190 – 1000 / 3,2 



Grout-in Bracket JMK+ 

JMK+ N / JMK+ NA 2 ) JMK+ E / JMK+ EA 2 ) JMK+ P / JMK+ PAR 2 ) 

Cantilevered Length L [mm] = 110-330 


JMK+ N JMK+ NA 2 ) JMK+ E JMK+ EA 2 ) JMK+ P JMK+ PAR 2 ) 

Prices on request Prices on request Prices on request 

2 ) Offset height not shown. 

The corresponding angle can be found on page 34. Other designs are available on request. 

Ordering Example Grout-in Bracket JMK-E 

shell space a = 50 mm, load category 3.5 kN 

Type Cantilevered Length Type Load Category 

JMK+ – 140 – E / 3.5 


■Stainless steel corrosion resistance class III 


Adjustment Foot 

Additional Component 

Depth 

Load Category 

3.5 

7.0 

10.5 



Type 

JVA+ZB 

Wall Thickness Load Category 

[mm] 

175 7.0 

240 7.0 

365 7.0 


€/Piece 


on request 

Attic Brick Anchor JAV 

Length 

[mm] 


€/Piece 

600 

Corresponding brick ties to be found on page 28. 

850 


on request 

Ordering Example Attic Brick Anchor JAV 

Type Depth of Construction Length L 

75 

1100 

JAV 75 / 600 

Special sizes available on request. 



SHEAR 


SHEAR 


FACADE 



Brickwork Support Brackets and Accessories 

Scaffold Anchor with Inner Thread, incl. Plastic Cap 

JGA + Q 

Ordering Example Scaffold Anchor Type JGA + Q 

total load Ü: 85 + 115 = 200 mm 

Type Price €/Piece 1 ) 

JGA + Q – 150 – 390 


Type 

Length L 

JGA + Q 190 


JGA + Z 

Ordering Example Scaffold Anchor Type JGA + Z 

total load Ü: 85 + 115 = 200 mm 

Type Price €/Piece 2 ) 

JGA + Z – 110 – 390 


Type 

Length L 

JGA + Z 190 


Ring Bolt FIG 

Type 

FIG M 12 × 40 zp 

1 ) incl. grey plastic cap 

2) incl. dowel and grey plastic cap 



Material and design Scaffold Anchor 


Bracket Bolt with Partial Thread and Nut 

Type Applicable Price 

for Channel 

Bracket LS 

€/100 Piece 

JH M 12 × 70 T A4-Set JTA K 38/17 3.5 

JB M 12 × 80 T A4 –70-Set JTA K 50/30 7.0 


JB M 16 × 85 T A4-Set JTA K 53/34 10.5 

Set including nut, wedge adjuster, U-plate 

More hammer-head and hook-head bolts can be found on page 16 ff. 

Compensating Bracket 

Type 

Compensating 

Bracket 

Material Thickness 

[mm] 

2 

3 

4 

5 

6 


€/Piece 


request 




Wedge Adjuster, U-Plate 

Dowels 

Type 

Wedge 

Adjuster 

U-Plate 

Material 

Strength [mm] 

3.5/7.0/10.5 

3.5 + 7.0 

10.5 


€/Piece 


request 

Type 

Anchor bolt M 10/10 A4 

Anchor bolt M 12/10 A4 

Anchor bolt M 12/50 A4-Set 1 ) 



Stud anchor M 12 × 75/60 A4-Set 2 ) 




Cleaning brush BS 12 3 ) 

Cleaning brush BS 14 4 ) 

Cleaning brush BS 16/18 5 ) 

Relief valve 


€/Piece 


on 

request 

1 ) Set incl. wedge adjuster and clamping plate 

2) Set incl. injection mortar cartridge, perforated plate and clamping plate; 

injection mortar cartouche and cartridge applicator gun available 

on request. 

3) for stud anchors M 12 × 75 

4) for stud anchors M 12 × 120 

5) for stud anchors M16 

Cavity Wall Ties 

L 

L 

Type 

Well – L 

ZV – Welle 

Article Name 

[mm] 

4/225 

4/250 

4/275 

4/300 

4/340 

4/160 

4/180 

4/210 

4/250 

4/275 

4/300 

4/320 

4/350 

Price 3 ) 

€/100 Piece 


3 ) Sold only in complete pack.-unit. 1 pack.-unit = 250 items. Other types available on request. 


■Stainless steel 

corrosion resistance class III 

Ordering Example Cavity Wall Ties L-form 

Type 

Length L [mm] 

Well – L 4/250 

Insulation Retainer, Water Barrier Disc, ISO-Clip 

Insulation Retainer Water Barrier Disc ISO-Clip 





SHEAR 


SHEAR 


FACADE 



Mounting Channels 

JM W 

Profile Material Price 

€/m 

Cutting Rate €/ 

Piece 

15.5 

12.9 

10.5 

5 

7.9 

33 

72 

48 

JM W 72/48 

Bolt: JA M 20–M 30 


5 JM W 55/42 

2.75 

6 

2.4 

26 

55 

22 

53 

22 

50 

18 

40 

42 

34 

30 

22 

Bolt: JB M 10–M 24 


JM W 53/34 



JM W 50/30 



JM W 40/22 

Bolt: JC M 10–M 16 


black 49.50 11.40 

hdg 73.75 11.40 

A2 – – 

A4 426.05 23.25 

black 44.45 11.40 

hdg 67.20 11.40 

A2 – – 

A4 – – 

black 27.90 11.40 

hdg 42.40 11.40 

A2 – – 

A4 244.25 13.05 

black 18.75 7.20 

hdg 29.55 7.20 

A2 – – 

A4 189.30 9.25 

black 12.65 4.50 

hdg 19.30 4.50 

A2 – – 

A4 112.20 7.20 

JXM W 


€/m 


Piece 

 

 

 

5.5 

 

2.5 

5 

3 

 

 

 

 

18 

38 

29 

14 

 

 

23 

20 

JXM W 64/44 

Bolt: JXE M 20–M 24 


JXM W 53/34 

Bolt: JXB M 16–M 20 


JXM W 38/23 

Bolt: JXH M 12–M 16 

JH M 10–M 16 


JXM W 29/20 

Bolt: JXD M 12 

JD M 6–M 12 


black 72.65 16.35 

hdg 108.45 16.35 

A2 – – 

A4 


black 49.50 11.40 

hdg 73.95 11.40 

A2 – – 

A4 426.05 23.25 

black 18.75 7.20 

hdg 29.55 7.20 

A2 – – 

A4 189.30 9.25 

black 12.65 4.50 

hdg 19.30 4.50 

A2 – – 

A4 – – 


JM K 


€/m 


Piece 

 

8 

 

7.4 

6 

JM K 72/48 

4.5 

7 

5.5 

 

 

3 

2.5 

 

2.5 

2.75 

 

 

 

22 

53 

 

 

22 

50 

22 

48 

22 

41 

18 

40 

 

 

 

 

34 

 

 

30 

26 

41 

25 

 

 

1 ) available 6,000 mm only 

Bolt: JA M 20–M 30 


JM K 53/34 



JM K 50/40 1 ) 



JM K 50/30 



JM K 48/26 1 ) 



JM K 41/41 1 ) 

Channel Nuts: JAM (F) 22 

M 6–M 12 


JM K 40/25 



JM K 40/22 



JM K 38/17 

Bolt: JH M 10–M 16, 


black 45.05 11.40 

hdg 65.35 11.40 

A2 – – 

A4 305.75 13.20 

black 16.85 7.20 

hdg 28.20 7.20 

A2 – – 

A4 136.25 11.40 

black 15.60 – 

hdg 27.40 – 

A2 – – 

A4 – – 

black 12.75 4.50 

hdg 22.30 4.50 

A2 – – 

A4 111.80 7.20 

black 11.65 – 

hdg 18.60 – 

A2 – – 

A4 – – 

black 11.40 – 

hdg 19.20 – 

A2 – – 

A4 – – 

black 9.20 4.50 

hdg 15.65 4.50 

A2 58.00 7.20 

A4 75.50 7.20 

black 6.35 4.50 

hdg 11.95 4.50 

A2 – – 

A4 – – 

black 7.85 3.25 

hdg 12.95 3.25 

A2 47.70 5.00 

A4 61.85 5.00 

Ordering Example Framing Channel JM 

Type 

Profile 

Size 

Channel 

Length 

Material 

JM W 50/30 – 6,000 – hdg 

Associated Bolts: see pages 16-21. 


■ black = mill finish 1.0038/1.0044 


■ A2 = stainless steel 1.4301/1.4541 


■ W 

■ K 

= hot rolled 

= cold formed 



SHEAR 


SHEAR 


FACADE 



JM K 


€/m 


Piece 

2.5 

2.25 

 

2.3 

 

36 

18 

36 

18 

 

 

28 

12 

 

 

36 

20 

 

15 

 

21 

1.6 12 

11 


JM K 36/36 1 ) 



JM K 36/20 1 ) 



JM K 28/28 1 ) 

Bolt: JD M 6–M 12 


JM K 28/15 



JM K 28/12 



JM K 21/12 1 ) 

Bolt: JG M 6–M 8 


black 9.40 – 

hdg 16.30 – 

A2 – – 

A4 72.90 – 

black 6.35 – 

hdg 10.75 – 

A2 – – 

A4 – – 

black 6.05 – 

hdg 9.40 – 

A2 – – 

A4 48.85 – 

black 4.90 3.25 

hdg 7.95 3.25 

A2 29.80 5.00 

A4 39.40 5.00 

black 4,25 3.25 

hdg 6.60 3.25 

A2 24.80 5.00 

A4 39.25 5.00 

black – – 

sv 4.80 – 

A2 – – 

A4 – – 

Toothed Framing Channels JZM K 


€/m 


Piece 

7.5 

2.5 

22 

41 

22 

JZM K 41/22 

Bolt: JZS M 12–M 16 


black 14.50 4.50 

hdg 22.10 4.50 

A2 – – 

A4 88.85 7.20 

■ All prices incl. Foamfilling and nailholes 


■ Fixed length: L < 6,000 mm 

■ Weight per metre for mill finish version (for galvanized 

profiles: weight per metre +10 %) 


Slotted Back Channel Type JML K 


€/m 

Cutting Rate 

€/Piece 

JML K 50/40 1 ) 



 

 

LL 11 × 40 mm 

JML K 41/41 1 ) 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Channel Nuts: JAM (F) 22 

M 6–M 12 


LL 11 × 40 mm 

JML K 40/25 



LL 11 × 40 mm 

JML K 36/36 1 ) 

 

 

 

 

 

 

Bolt: JH M 10–M 16 


LL 11 × 40 mm 

JML K 28/28 1 ) 



LL 11 × 40 mm 

JML K 28/15 



LL 9 × 25 mm 

black 16.85 – 

hdg 28.60 – 

A4 – – 

black 12.95 – 

hdg 20.75 – 

A4 – – 

black 11.40 4.50 

hdg 17.85 4.50 

A4 78.65 7.20 

black 10.50 – 

hdg 17.35 – 

A4 75.85 – 

black 6.90 – 

hdg 11.40 – 

A4 51.85 – 

black 6.05 3.25 

hdg 9.15 3.25 

A4 42.65 5.00 


LL = Slot Size 

Toothed Slotted Back Channel JZML K 

 

 

 

 

 

JZML K 41/22 

Bolt: JZS M 12–M 16 

Weight: 1,74 kg/m 

LL 11 × 40 mm 

black 18.55 4.50 

hdg 24.10 4.50 

A4 92.15 7.20 

LL = Slot Size 


■ black = mill finish version 1.0038/1.0044 


■ sv 

= pre-galvanized 

■ A2 = stainless steel 1.4301/1.4541 


■ W 

■ K 

= hot rolled 

= cold formed 

■ Spacing of the slotted hole centres on perforated 

channel for installation: 60 mm (other slotted holes 

on request) 

Ordering Example Slotted Back Channel JML 

Type 

Profile 

Size 

Channel 

Length 

Material 

JML – K 40/25 – 6,000 – hdg 

Associated Bolts: see pages 16-21. 



SHEAR 


SHEAR 


FACADE 



Service 

Technical Advice 

In addition to the technical information in our brochures 

and on our website, our engineers will make static calculations 

and provide technical advice on request. 

Installation Instructions / Videos 

In order to achieve optimum results from the use of 

JORDAHL ® products, various installation instructions 

and videos are available to download. 

Tender Texts 

For all of the JORDAHL ® product ranges completed tender 

texts are available. These contain all of the relevant 

technical information with regard to material, bearing 

capacity and sizes together with notes on installation. 

The data can be exported, e. g. in GAEB-format, and sent 

as an e-mail attachment or stored as a data file. 

Information at www.jordahl.de. 

Queries/orders on +49-30-68283-433 or info@jordahl.de. 

Additional ordering information 

All deliveries are made solely in accordance with the 

Terms of Delivery and Payment dated October 2012 

(see page 46). 


The list prices are ex works, excluding packaging, plus 

the applicable statutory rate of VAT. 

Surcharges for Small Quantities 

For consignments with a value of less than € 150,– we 

charge a small quantities surcharge of € 25,–. 

For incomplete pack.-units we charge a handling fee of 

20 % of Netto value. 

Surcharges 

In addition, the list prices are subject to the alloy 

surcharges, steel surcharges and other surcharges 

applicable on the date of delivery. 

Return of Goods 

Goods may only be returned by agreement and in resaleable 

condition. A Re-stocking fee of 15 % of net value 

will be invoiced. 

Standard Freight Charges for Deliveries 

within Germany 

Delivery of all JORDAHL ® products with a net value starting 

from € 2.000,– are carriage free. 

■ Parcel service (max. 30 kg): € 12,– 

■ Shipping items (< € 1.000,– net contract value) € 90,– 

■ Shipping items (> € 1.000,– up to € 2.000,– net 

contract value) € 50,– 

■ Fixed-date/express shipments: priced on a time and 

materials basis 

■ Long and oversized shipments: priced on a time and 

materials basis 

Note 

When using our materials, please observe the installation 

instructions or the relevant notes on how to use them 

in our catalogues. 


Advice 

The JORDAHL Experts 

You are always well advised when you choose JORDAHL 

products. Whether from the point of view of static 

calculations, general technical advice/service or the 

development of customised solutions – competent 

and experienced JORDAHL product specialists offer you 

state-of-the-art, flexible and customised solutions for all 

your needs. 

Throughout Europe and around the world 

JORDAHL products have proven themselves in use 

around the world because German quality standards are 

in demand everywhere. We can also guarantee perfect 

delivery of our products to you thanks to our reliable 

logistics partners and a perfectly functioning logistics 

chain (certified in accordance with DIN EN ISO 9001), 

because personalised, high-quality, customer-focused 

service is essential to us when it comes to delivery, too. 

Design Software 

Easy-to-use design software is available to help in 

identify the best products for individual installation 

situations. This software is available to download free 

of charge. 

Tender texts available on www.jordahl.de 



SHEAR 


SHEAR 


FACADE 



Terms of Delivery and Payment 

The General Terms and Conditions of Business in their latest version always 

apply. The following Terms of Delivery and Payment are an integral part of all 

the vendor‘s supply contracts. If the purchaser has any conditions of purchase, 

these do not form part of the contract. The conditions also apply to any followup 

business, even if it has not been explicitly agreed that they should apply. 

Section 1: Subject of the Contract 

a) Our proposals, plans, drawings and sketches are subject to alteration. Any 

settlements or other agreements are not binding unless confirmed in writing 

by us. 

b) We are not bound by any errors made in quotations, invoices etc. - especially 

typing errors - and we are not obliged to provide compensation. This does 

not affect our liability for intent or gross negligence. 

c) Any proposals, plans, drawings and samples or other material subject to copyright 

must not be made available to third parties, and the vendor retains 

the ownership and proprietary rights. 

Section 2: Prices and Terms of Payment 

a) Our prices are ex works in Berlin or from the distribution centre, exclusive of 

packaging. VAT at the legal rate will be added to these prices. The final price 

is determined by prices on the date of delivery. Where the invoiced amount 

is less than €150, we charge a small quantity surcharge of €25. 

b) We give a 2 % discount for payment within 14 days of the date of invoice, 

with the date of payment being the date on which the payment arrives in the 

vendor‘s account. Where we accept bills of exchange or cheques, this is subject 

to their safe receipt, minus expenses, and with the value date being that 

on which the remittance becomes available to us. In the case of payment by 

cheque or bill of exchange, the reservation of ownership described in Section 

3 does not expire until the cheque or bill of exchange is finally cashed 

on the due date. 

c) In the event of delayed payment, the vendor is entitled to charge the legal 

rate of interest on arrears or at least 9 % p.a. This does not affect the right to 

prove differing losses - if the legal rate of interest is not being applied. 

If the purchaser is in arrears with one payment, then all the vendor‘s claims, 

including those deferred or not yet due, become due immediately. 

This also applies where a payment is stopped or where an application has 

been made to open bankruptcy proceedings. In the event of delayed payment, 

the vendor is entitled to make future deliveries dependent on settlement 

of the outstanding claims. If payment is delayed, any reductions or 

discounts that were given no longer apply. 

d) If the purchaser fails to comply with the terms of payment, we are entitled, 

in addition to all our other rights, to forbid the selling on or processing of 

the goods that have been delivered, and to demand that they be returned 

or that the possession in law of the delivered goods be transferred at the 

purchaser‘s expense, and to cancel the authorisation to collect payment as 

described in Section 3e. The purchaser hereby agrees to the delivered goods 

being taken away in such cases. 

e) We are entitled to claim the usual type and scope of securities for our claims, 

even where these are conditional or limited in time. 

f) Where the goods are sold in a diff erent currency, the purchaser bears the 

exchange rate risk from the time when the contract is signed. 

Section 3: Reservation of Ownership 

a) The delivered goods remain the property of the vendor until completion of 

full payment of the purchase price and of any other, including subsequent, 

claims arising and due to the vendor from the purchaser as a result of this 

business relationship. 

b) The purchaser is only entitled and authorised to process or sell on goods 

subject to retention of title in the proper course of business and only on condition 

that the provisions under letters c) and d) are observed. The purchaser 

is not entitled to use the goods subject to retention of title in any other way, 

or the claims which he has assigned or has to assign to the vendor under 

letter d). 

c) If the delivered goods are processed by the purchaser to make a new 

product, then the further processing shall be on the vendor‘s behalf. The 

purchaser is not entitled to acquire ownership under Section 950 BGB (German 

Civil Code). If the product is processed with other goods not belonging 

to the vendor, then the vendor acquires co-ownership of the new product in 

proportion to its value. The new product is regarded as an article subject to 

retention of title. 

d) The purchaser hereby assigns to the vendor his claims arising from any onward 

sale of the goods subject to retention of title, up to the sum corresponding 

to the value of the goods subject to retention of title. The value of the 

goods subject to retention of title, for the purpose of these provisions, is the 

value on the vendor‘s invoice plus a security charge of 20 %. 

e) The vendor authorises the purchaser to collect claims arising from the onward 

sale, retaining the right to revoke this authorisation. The vendor will not 

make use of their own authorisation to collect, provided that the purchaser 

meets his payment obligations. On request, the purchaser must give the 

vendor the names of the debtors for the assigned claims and tell the latter 

that the claim has been assigned. The vendor is hereby authorised to notify 

the debtors of the assignment process on behalf of the purchaser. 

f) If the value of the securities given to the vendor exceeds the claims by more 

than 20 %, then the vendor is obliged, at the request of the purchaser, to 

reassign or release them, at his discretion. 

g) The purchaser must inform the vendor promptly of any enforcement proceedings 

or other measures by third parties which could have a detrimental eff 

ect on the vendor‘s rights over the goods subject to retention of title or to 

assigned claims, in law or in fact, and hand over the materials that are necessary 

for an intervention. In the event of any attachment or other seizure, 

the purchaser is obliged to point out the vendor‘s ownership of the goods 

to the enforcement officers and to notify the vendor within three days, by 

sending a copy of the record of attachment. The purchaser bears the costs of 

defending the vendor‘s rights of ownership. 

h) The provisions of these paragraphs apply equally if the purchaser disposes 

of the goods not by a sale but under a service contract or a contract for 

works, labour and materials. 

Section 4: Delivery Times, Delivery Deadlines 

a) Delivery times start from the date of our order confirmation. They are nonbinding 

and are subject to the vendor himself being supplied correctly and 

on time. Other conditions apply only if the vendor guarantees binding delivery 

times in writing. The time and date of delivery is regarded as being 

the time at which the goods are dispatched from the factory or distribution 

centre. 

b) Delivery times and deadlines shall be extended - regardless of our other 

rights arising from arrears - by the length of time for which the purchaser is 

in arrears with payment to us. 

c) Our compliance with delivery times presupposes that our working processes 

are uninterrupted and that our systems of dispatch and delivery are unimpeded. 

Incidences of force majeure, strikes, traffic disruption, shortages of 

transportation, heating oil, raw or auxiliary materials or operational stoppages 

of any kind at our own works or at works connected with fulfilling the 

terms of the contract, or problems caused by official decrees which make 

delivery difficult exempt the vendor from meeting his delivery obligations for 

as long as they take effect, without the purchaser being entitled to withdraw 

from the contract. 

d) If we fall into arrears, then the purchaser may, following the expiry of a suitable 

period of grace which they grant us, withdraw from the contract if we have not 

reported that the goods are ready for dispatch by the end of that period. 

Section 5: Dispatch and Transfer of Risk 

a) Goods reported as being ready for dispatch must be requested promptly. 

b) Goods are delivered on a freight collect basis from the factory in Berlin or the 

distribution centre, unless agreed otherwise. Packaging costs will be charged 

for. Delivery by post will be solely as a parcel or with postage paid, and 

postage costs will be charged to the purchaser. 

c) Once the goods are handed over to the carrier or transport company, or at 

the latest when they leave the factory or warehouse, the risk transfers to the 

purchaser. 

Section 6: Faults 

a) Whether the goods are in the condition required by the contract is determined 

at the time at which they leave the factory or warehouse. 

b) We must be notified promptly in writing of any defects, and any further processing 

must cease immediately, certainly no later than within five days of 

receipt of the goods. 

c) If the goods are faulty, the vendor complies with the guarantee by rectifying 

these faults free of charge and/or supplying a free replacement, at his 

discretion (to remedy the defect). Provided that the vendor fulfills their 

obligations to remedy the defect, the purchaser does not have the right to 

demand any reduction in the payment or cancellation of the contract, unless 

the attempted remedy fails. 

d) In the event of any breach of obligations for which the vendor is responsible, 

claims for compensation, whether contractual or non-contractual, can only 

be made where there was intent or gross negligence. This does not apply 

where there is injury to life and limb or health, provided the purchaser is not 

a corporate entity. 

Section 7: Place of Performance / Place of Jurisdiction / Right of Off Set 

a) The place of performance and place of jurisdiction for both contracting parties 

is the headquarters of JORDAHL GmbH (Berlin), provided the purchaser 

is a registered trader. 

b) The purchaser‘s right to offset claims with counter-claims is only permissible 

in the case of legally confirmed or undisputed claims. 

Section 8: Miscellaneous 

a) Excess quantities 

The purchaser is obliged to accept any excess quantity of goods up to 10 % 

of any particular item, at the contractual price. 

b) Part-deliveries 

We are entitled to make part-deliveries. This does not affect the price. Each 

partdelivery is regarded as a separate transaction. 

c) Application of German law 

All legal relationships between ourselves and the purchaser are governed 

exclusively by German law. UN Sales Law cannot be applied. 

d) Written form 

There are no verbal side agreements. All agreements made in the context of 

this business relationship must be made in writing. The same applies to the 

waiver of the requirement for written form. 

e) Partial ineffectiveness 

If certain provisions of these terms and conditions of delivery and payment 

are wholly or partially ineffective, this does not affect the effectiveness of the 

remaining provisions. The ineffective provision should be replaced by one 

coming closest to its intended economic purpose. 

October 2012 


Index 

A 

Additional Component 37 

Anchor Channels JTA, JXA, JZA 9, 10, 15 

Anchor Channel Pricing 11 

Angled Bracket JW 34 

Angled Support Brackets L-DN / L-DF / L-F 36 

Assembly Aid JDA-Q 30 

Attic Brick Anchor JAV 37 

B 

Bolts JA, JB, JE, JC, JH, JD, JG 16 – 21 

Bracket Bolt 38 

Brick Tie Anchor JMA 28 

Brick Tie Channels Kt 28 

Brickwork Support Brackets JVA 34 – 39 

C 

Cavity Wall Ties 39 

Channel Nuts JAM 22 

Clamp Connections JSV 24 

Clamping Claw and Adaptor SKU 26 

Clamping Plates 26 

Clamping Plate (U-plate), Insulation Retainer 39 

Curved Anchor Channels JTA, JXA, JM, JXM 15 

Compensating Bracket 38 

Coupling Sleeve Round 23 

D 

Depth Adjustment 37 

Double-Notch Toothed Bolts JKB, JKC 21 

Double Shear Connector JDSD/JDSDQ 32 

Dowels 39 

E 

Edge Protection Angle JKW 14 

End Anchors for Anchor Channels 25 

End Anchor for Profiled Metal Sheet 

Channels JTB-EA, JTB-EB 12 

Eyelet Sockets ÖM 24 

F 

Fire Protection Collar JBRM, JBRMQ 32, 33 

Frame Shoe JG 27 

G 

Grout-in Brackets JMK+ 37 

H 

Hammer-head Locking Plates 22 

Hexagonal Coupling Sleeves 23 

Hexagon Bolts 23 

Hook-head Locking Plates 22 

I 

Iso-Clip 39 

L 

Locking Plates JGM 22 

Loop Channels JSA 10 

M 

Mounting and Framing Channels 

JM, JXM, JML, JZML 15, 40 – 42 

N 

Notch Toothed Bolts 22 

P 

Prefabricated Part Holder JFT 36 

Pressure Bolts JDS 24 

Profile Brackets JK 14 

Profiled Metal Sheel Channels JTB 12 

R 

Railing Fastening JGB 13 

Ring Bolt / Frame Eyelet FIG 38 

Ring Nuts RM 24 

S 

Scaffold Anchor JGA+Q, JGA+Z 38 

Self Locking Nut with Serrated Bearing 23 

Shear Reinforcement JDA-S 30 – 31 

Sliding Sleeve 28 

Spacers AH-DA, FBA, AH-FT 31 

Spring Washer 23 

Stainless Steel Wire ESD 35 

Studrails JDA, JDA-S 30 – 31 

Suspension Loop JRH 35 

T 

Thin-Bed Brick Tie Anchors JMA-D 28 

Threaded Loop JGS 36 

Threaded Rods GS 24 

Timber Fixing Strap JNA 29 

Toothed Bolts JXB, JXD, JXH, JZS, JXE, JKC 20 

Toothed Channels JXA, JXA-PC, JZA 8, 10 

Toothed Straps JVB-Z, JVB-ZS 25 

Turnbuckles SP 24 

W 

Washer 23 

Water Barrier Disc 39 

Wedge Adjuster 39 



SHEAR 


SHEAR 


FACADE 



JORDAHL GmbH 

Nobelstr. 51 

12057 Berlin 

Germany 

Tel + 49 30 68283-02 

Fax + 49 30 68283-497 

www.jordahl.de 

info@jordahl.de 

LIT-PL2013-EN / 1. / 01-2013

PDF Price list JORDAHL Pricelist 2013 - J & P â Bautechnik ...

Create successful ePaper yourself

Delete template?

Save as template?

PDF Price list JORDAHL Pricelist 2013 - J & P â Bautechnik ...