ENI ROTRA GEAR TEC HY - TransDiesel
ENI ROTRA GEAR TEC HY - TransDiesel
ENI ROTRA GEAR TEC HY - TransDiesel
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
eni rotra gear tec <strong>HY</strong> (series)<br />
P R O D U C T D A T A S H E E T<br />
eni rotra gear <strong>HY</strong> is a gear oil series with EP characteristics, recommended for hypoid gears operating<br />
under normal conditions<br />
It can also be used in conventional gear-boxes and steering-boxes on cars and trucks, and in gear-boxes,<br />
final drives and power take-offs on farm and earth-moving machinery.<br />
It can thus be used for lubricating all gears, whatever they are made of, for which the manufacturer<br />
recommend an EP lubricant where API GL-5 level is not required.<br />
CHARACTERISTICS (TYPICAL FIGURES)<br />
eni rotra gear tec <strong>HY</strong><br />
SAE Grade 80W-90 85W-140<br />
Viscosity at 100°C mm²/s 15.6 28.0<br />
Viscosity at 40°C mm²/s 135 400<br />
Viscosity Index - 95 95<br />
Flash Point COC °C 170 200<br />
Pour Point °C -27 -12<br />
Mass density at 15°C kg/l 0.896 0.806<br />
PROPERTIES AND PERFORMANCE<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Its superior EP additives ensure a continuous lubricant film even on gears operating under the severest<br />
conditions involving heavy dynamic and shock loads, and very high, or intermittent sliding speeds<br />
between the teeth.<br />
Its outstanding antiwear properties and its oiliness, markedly reduce gear-tooth and bearing wear.<br />
Its particularly good oxidation stability prevents any deterioration even when in contact with<br />
components operating at high temperatures. Thus any tendency for viscosity to increase or for sludge<br />
to form is inhibited.<br />
eni rotra gear tec <strong>HY</strong> can therefore be kept in use for the long oil-service periods specified by car<br />
manufacturers.<br />
eni rotra gear tec <strong>HY</strong> is noncorrosive to steel, copper and other metals and alloys, and thus helps<br />
keep lubricated parts in first-class condition.<br />
Its antirust properties effectively prevent rust on gears and in bearings even when moisture is present.<br />
Its antifoam qualities minimize the formation of air bubbles which could adversely affect lubricant<br />
film continuity.<br />
ITALCO (Far East) Pte Ltd 101 Thomson Road #26-02<br />
United Square, Singapore 307591<br />
Phone +65 6659 1250<br />
www.italco.com.sg<br />
(IS0091~2.09/2012)<br />
Page 1 of 1
eni rotra gear tec <strong>HY</strong> (series)<br />
P R O D U C T D A T A S H E E T<br />
SPECIFICATIONS<br />
eni rotra gear tec <strong>HY</strong> is officially approved by or meets the requirements of the following service and<br />
manufacturer specifications:<br />
- API GL-4<br />
- MAN 341 type N (Z-1) (SAE 80W90)<br />
- MB 235.1 Level (SAE 80W90)<br />
- MIL-L-2105 Level<br />
- ZF TE-ML 02A, 16A, 17A, 19A (SAE 80W90)<br />
- ZF TE-ML 02A, 16A, 17A LEVEL ( SAE 85W140)<br />
Disclaimer Clause:<br />
ITALCO reserves the right to vary the specifications, claim and any of the information documented in this datasheet<br />
without prior notice. The information contained in this document is for general information purposes only. ITALCO makes<br />
no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability<br />
or availability with respect to the information contained on the datasheet.<br />
ITALCO (Far East) Pte Ltd 101 Thomson Road #26-02<br />
United Square, Singapore 307591<br />
Phone +65 6659 1250<br />
www.italco.com.sg<br />
(IS0091~2.09/2012)<br />
Page 1 of 1
Change language