Crocus SHDSL Repeater 2P - Route 66 Communications
Crocus SHDSL Repeater 2P - Route 66 Communications
Crocus SHDSL Repeater 2P - Route 66 Communications
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Crocus</strong> <strong>SHDSL</strong> <strong>Repeater</strong> <strong>2P</strong> Chapter 4 41<br />
User manual<br />
Monitor interface<br />
4.4 Common commands<br />
The common commands are commands that are available in every sub-menu. These commands are the<br />
following:<br />
HELP<br />
Typing “H” and hitting the enter key, displays all available commands of the selected sub-menu. Typing<br />
H gives additional information on the .<br />
MAIN<br />
Typing “M” and hitting the enter key, redirects you to the main menu.<br />
CONNECT<br />
This command opens a monitor interface session on a remote <strong>Crocus</strong> <strong>SHDSL</strong> <strong>Repeater</strong> <strong>2P</strong>. During such<br />
a remote session, the local <strong>Crocus</strong> <strong>SHDSL</strong> <strong>Repeater</strong> <strong>2P</strong> can not be accessed anymore until you close<br />
the remote session using the DISCONNECT command or by selecting "Exit" in the main menu (of the<br />
remote <strong>Crocus</strong> <strong>SHDSL</strong> <strong>Repeater</strong> <strong>2P</strong>).<br />
To connect to the remote unit, add the parameter "R" or type the repeater number (1 to 8).<br />
In case of a remote session, some commands are unavailable for safety reasons.<br />
DISCONNECT<br />
This command closes a monitor interface session on a remote <strong>Crocus</strong> <strong>SHDSL</strong> <strong>Repeater</strong> <strong>2P</strong>.