Crocus SHDSL Repeater 2P - Route 66 Communications
Crocus SHDSL Repeater 2P - Route 66 Communications Crocus SHDSL Repeater 2P - Route 66 Communications
40 Crocus SHDSL Repeater 2P Chapter 4 User manual Monitor interface 4.3 Main menu The main menu looks as follows: Crocus SHDSL Repeater ID HW Rev. B1 SW Rev. 1.8.0.0 FW Rev. R1.7 Copyright (C) 2001 by Telindus ------------- Main Menu ----------------- 1. Performance management (PM) 2. Fault and maintenance management (FMM) 3. Configuration management (CM) 5. Exit ----------------------------------------- RR_03_MM>Select [1..5]: To select a sub-menu, type 1, 2 or 3. To exit, type 5. Each command has to be terminated by a carriage return.
Crocus SHDSL Repeater 2P Chapter 4 41 User manual Monitor interface 4.4 Common commands The common commands are commands that are available in every sub-menu. These commands are the following: HELP Typing “H” and hitting the enter key, displays all available commands of the selected sub-menu. Typing H gives additional information on the . MAIN Typing “M” and hitting the enter key, redirects you to the main menu. CONNECT This command opens a monitor interface session on a remote Crocus SHDSL Repeater 2P. During such a remote session, the local Crocus SHDSL Repeater 2P can not be accessed anymore until you close the remote session using the DISCONNECT command or by selecting "Exit" in the main menu (of the remote Crocus SHDSL Repeater 2P). To connect to the remote unit, add the parameter "R" or type the repeater number (1 to 8). In case of a remote session, some commands are unavailable for safety reasons. DISCONNECT This command closes a monitor interface session on a remote Crocus SHDSL Repeater 2P.
- Page 1 and 2: Crocus SHDSL Repeater 2P Crocus SHD
- Page 3 and 4: Crocus SHDSL Repeater 2P User manua
- Page 5 and 6: Crocus SHDSL Repeater 2P User manua
- Page 7 and 8: Crocus SHDSL Repeater 2P User manua
- Page 9 and 10: Crocus SHDSL Repeater 2P 1 User man
- Page 11 and 12: Crocus SHDSL Repeater 2P Chapter 1
- Page 13 and 14: Crocus SHDSL Repeater 2P Chapter 1
- Page 15 and 16: Crocus SHDSL Repeater 2P Chapter 1
- Page 17 and 18: Crocus SHDSL Repeater 2P Chapter 2
- Page 19 and 20: Crocus SHDSL Repeater 2P Chapter 2
- Page 21 and 22: Crocus SHDSL Repeater 2P Chapter 2
- Page 23 and 24: Crocus SHDSL Repeater 2P Chapter 2
- Page 25 and 26: Crocus SHDSL Repeater 2P Chapter 2
- Page 27 and 28: Crocus SHDSL Repeater 2P Chapter 2
- Page 29 and 30: Crocus SHDSL Repeater 2P Chapter 2
- Page 31 and 32: Crocus SHDSL Repeater 2P Chapter 2
- Page 33 and 34: Crocus SHDSL Repeater 2P Chapter 2
- Page 35 and 36: Crocus SHDSL Repeater 2P Chapter 2
- Page 37 and 38: Crocus SHDSL Repeater 2P Chapter 3
- Page 39 and 40: Crocus SHDSL Repeater 2P Chapter 3
- Page 41 and 42: Crocus SHDSL Repeater 2P Chapter 3
- Page 43 and 44: Crocus SHDSL Repeater 2P Chapter 3
- Page 45 and 46: Crocus SHDSL Repeater 2P Chapter 4
- Page 47: Crocus SHDSL Repeater 2P Chapter 4
- Page 51 and 52: Crocus SHDSL Repeater 2P Chapter 4
- Page 53 and 54: Crocus SHDSL Repeater 2P Chapter 4
- Page 55 and 56: Crocus SHDSL Repeater 2P Chapter 5
- Page 57 and 58: Crocus SHDSL Repeater 2P Chapter 5
- Page 59 and 60: Crocus SHDSL Repeater 2P Chapter 5
- Page 61 and 62: Crocus SHDSL Repeater 2P Chapter 5
- Page 63 and 64: Crocus SHDSL Repeater 2P Chapter 5
- Page 65 and 66: Crocus SHDSL Repeater 2P 57 Annex A
- Page 67 and 68: Crocus SHDSL Repeater 2P Annex A: 5
- Page 69 and 70: Crocus SHDSL Repeater 2P Annex Inde
40 <strong>Crocus</strong> <strong>SHDSL</strong> <strong>Repeater</strong> <strong>2P</strong> Chapter 4<br />
User manual<br />
Monitor interface<br />
4.3 Main menu<br />
The main menu looks as follows:<br />
<strong>Crocus</strong> <strong>SHDSL</strong> <strong>Repeater</strong><br />
ID<br />
HW Rev. B1<br />
SW Rev. 1.8.0.0<br />
FW Rev. R1.7<br />
Copyright (C) 2001 by Telindus<br />
------------- Main Menu -----------------<br />
1. Performance management (PM)<br />
2. Fault and maintenance management (FMM)<br />
3. Configuration management (CM)<br />
5. Exit<br />
-----------------------------------------<br />
RR_03_MM>Select [1..5]:<br />
To select a sub-menu, type 1, 2 or 3. To exit, type 5.<br />
Each command has to be terminated by a carriage return.