Modular Step-in Cold Rooms - Porkka

New Unique Porkka Shelving System
Porkka has designed a totally new shelving system for our standard range of
rooms. We have focused on improved hygiene features, flexibility and greater
surface area, for more storage space. The support pilasters are fixed to the
insulated wall panels, which are positioned to allow easy all round cleaning of
the floor.
Four (4) tier shelving is supplied as standard. In rooms with a width up to
1500mm, shelving is supplied to two (2) walls and in rooms with greater
width, shelving is fitted to three (3) walls.
Installation is simple and quick. Place shelf support brackets at desired height,
fit support bars horizontally into the ready made openings and place shelving
inserts between the bars. The tough, strong inserts are produced from plastic
that is approved for use with foodstuffs. Even the largest shelving insert 300 x
462mm can fit into most commercial dishwashers.
It is also possible to purchase additional shelves which can be easily added at
a later date to facilitate further storage space.
The depth of rear wall shelving will be 488mm and dependent on room
model, the total depth of side wall shelving will be either 398 or 488mm.
The shelving can be evenly loaded with up to 70Kg per meter run i.e. 280 Kg
per 4 tier shelving meter run.
Shelf support brackets
together with horizontal
bars are simple and quick to
install and are designed to
be strong and durable
under heavy loads.
Shelf inserts have been
produced from high density,
durable plastic, which is
approved for use with
foodstuffs. They can be easily
taken out and washed in a
dishwasher or by hand for
improved hygiene.
Pilasters affixed to wall.
Note that shelving can now
be placed much closer to
the floor level than in the
previous range. Sufficient
space is still available to
allow cleaning of the floor.
10
Easy-to-adjust shelves are strong and machine washable.