SPG10 PC-Software Manual - elmed

More documents

Recommendations

Info

Mitterweg 25 – Via di Mezzo ai Piani 25 I-39100 Bozen – Bolzano Tel.:0471 977236 – Fax:976525 e-mail: info@elmed.it http://www.elmed.it 6.5.5 Speed The speed is shown here, which should be driven while spraying. Small speed changes during the ride are automatically balanced with an appropriate control. 6.5.6 Water Expense/ha In this field you see the recommended water expense per hectares, which is used for the spraying. This value is included in the calculation and it determines the total amount of water. 20
Mitterweg 25 – Via di Mezzo ai Piani 25 I-39100 Bozen – Bolzano Tel.:0471 977236 – Fax:976525 e-mail: info@elmed.it http://www.elmed.it 6.6 Spray Program – Sbr South Tyrol Setting Important: This chapter is only relevant if you have selected under the menu item „settings“ the calculation variant „Sbr South Tyrol“, otherwise continue with chapter „6.5 Spray Program Settings - Standard“. in the lower area o the window you see the fields for the display and input of the parameters of the spray program. The data are applied immediately, so you don't need to save them. Img. 19: Parameter of the spray program 6.6.1 Designation Spray Program In the field „designation spray program“ to every program can be given an individual name. So that in each spray program a particular plot and at least one active substance is assigned, it is recommended to choose the name so, that the plot and the type of injection are seen. So that the programs in the subsequent selection list (also on sprayer) are sorted alphabetically, it is recommended to name all spray programs with the same pattern: o e.g. first the land, then the spray type („meadow scab“). So, all spray programs are sorted by plot. o Oher way around („scab meadow“). So, all spray programs are sortey by spray type. 6.6.2 Choice Plot In the field „plot“ plot is assigned to a program (edit plot, create plot ect. see chapter „5 Plots Of Land “). The key data of the chosen plot are shown in the lower window area. (e.g. row width, tree height, total water expense...) 6.6.3 Comment In this field you can enter any text. 6.6.4 Surface to be edit The surface to be edit is taken from the data of the assigned plot. The surface can also be changed here, if only a part of the plot needs to be edited. 21
Page 1 and 2: Mitterweg 25 - Via di Mezzo ai Pian
Page 19: Mitterweg 25 - Via di Mezzo ai Pian

SPG10 PC-Software Manual - elmed

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?