EU-SICHERHEITSDATENBLATT Dieselkraftstoff ... - Schmierstoffe

Professional - Maintenance and
CS77 Daily; 1-4 hours; Enclosed transfers, PROC8b 1-4 hours daily;
SU22 machine set-up
Elevated temp (30o vented transfer points; Discharging elevated temp.
above ambient) clear lines prior to to/from vessels
decoupling
(dedicated)
Professional - Draining equipment CS18 Daily; 1-4 hours; Retain drainings in PROC8a 1-4 hours daily;
SU22 (small items) e.g.
Elevated temp (30o sealed storage pending Discharging elevated temp.
engine drains
above ambient) disposal. PPE.
to/from vessels
non dedicated
Professional - Engine lubricant service CS78 Daily; 1-4 hours; None PROC9 - Transfer daily; ambient
SU22 - to cover small
ambient temp;
of chemicals into temp.
additions of oil to
small containers
engines
Combine in narrative Professional - Manual roller
CS13 Indoor, Daily; 8 hours, PPE. If LEV applied (to PROC 10 Roller or >4 hours, ambient
1. LEV
SU22 application or brushing
product temp (ambient); provide options for RMM) brush application temp.
of coatings CS13
Automated
replenishment of roller
or brush
2. General ventilation Professional - Manual roller
CS13 Indoor, Daily; 8 hours, PPE PROC 10 Roller or >4 hours, ambient
SU22 application or brushing
product temp (ambient),
brush application temp.
of coatings CS13
Automated
replenishment of roller
or brush
3. RPE Professional - Manual roller
CS13 Indoor, Daily; 8 hours, PPE. If ventilation PROC 10 Roller or >4 hours, ambient
SU22 application or brushing
product temp (ambient), inadequate and RPE brush application temp.
of coatings CS13
Automated
applied (to provide
replenishment of roller options for RMM)
or brush; Solvent
concentration 95% or
greater for cleaners/
Combine in Professional - Spraying CS10 CS10 Indoor or outdoor, Daily; Respiratory protection, PROC 11 Spraying >4 hours, ambient
narrative.
SU22
15 min - 1 hour, product eye protection, gloves. If - non-industrial temp.
1. LEV
temp (ambient), LEV applied (to provide
selection of spray options for RMM)
nozzles to avoid small
droplet size to minimise
product losses
Vapour phase Professional - Spraying CS10 >4 hours, ambient
Value for low SU22
temp.
volatility liquid
applied
Combine in narrative Professional - Spraying CS10 CS10 Indoor or outdoor, Daily; Respiratory protection, PROC 11 Spraying >4 hours, ambient
with 'alternative' SU22
15 min - 1 hour, product eye protection, gloves - non-industrial temp.
phrases
temp (ambient),
2. General ventilation
selection of spray
and RPE
nozzles to avoid small
droplet size to minimise
product losses
Vapour phase Professional -
>4 hours, ambient
Value for low SU22
temp.
volatility liquid
applied
Professional - Treatment of articles by CS35 Indoor, Daily; 8 hours, Cabinet to allow the PROC 13 Dipping >4 hours, ambient
SU22 dipping and pouring
ambient temp, automatic dipping and the dripping and pouring temp.
(CS35)
dipping in a bath of the pieces. PPE
Professional - Storage CS67 Daily; 8 hrs; ambient samples collected at PROC1 Closed daily; ambient
SU22
temp;
dedicated sample point continuous process temp.
(sometimes with
Metal working Industrial -SU3 General exposures CS15 Indoor, Daily; 8 hour; Closed processes PROC1 and >4 hours, ambient
fluids / rolling oils
(closed systems)
ambient temp.
PROC2 Closed temp.
process
Industrial -SU3 General exposures CS15 Indoor, Daily; 8 hour; Enclosed process; ; PROC3 Closed >4 hours, ambient
(closed systems) ,
ambient temp. closed/semi-closed batch process (with temp.
including closed EDM
sampling point
sampling)
processes
No LEV 25 80 5 1-4 hours daily 0.69 80 0.14 0.07 0.05 0.12 Provide extract ventilation to emission
(0.6x); E67
points when contact with warm
conveys 90%
(>50oC) lubricant is likely) E67 Clear
efficiency
transfer lines prior to decoupling E39
Wear suitable gloves tested to EN374
PPE15
Provide a good standard of general
No LEV 50 80 7 SOP re drain
13.71 90 1.37 0.10 0.47 0.58 downs (E81);
ventilation (3 to 5 air changes per
Good general
hour) E11 Drain or remove substance
ventilation
from equipment prior to break-in or
(0.7x);
maintenance E81. Wear chemically
resistant gloves (tested to EN374) in
combination with ‘basic’ employee
training.. PPE16 Retain drain downs in
sealed storage pending disposal or for
subsequent recycle. ENVT4.
No LEV 5 0 5 6.86 90 0.69 0.07 0.24 0.31 Provide a good standard of general
ventilation (3 to 5 air changes per
hour) E11 Wear suitable gloves tested
to EN374 with basic training PPE16
No LEV 5 0 5 27.43 95 1.37 0.07 0.47 0.55 Provide a good standard of general
ventilation (3 to 5 air changes per
hour) E11 Provide extract ventilation
to points where emissions occur E54
Wear chemically resistant gloves
(tested to EN374) in combination with
specific activity training . PPE17
No LEV 5 0 5 27.43 95 1.37 0.07 0.47 0.55 Provide a good standard of general
ventilation (3 to 5 air changes per
hour) E11 Provide extract ventilation
to points where emissions occur E54
Wear chemically resistant gloves
(tested to EN374) in combination with
specific activity training . PPE17
No LEV 5 0 5 27.43 95 1.37 0.07 0.47 0.55 Provide a good standard of general
ventilation (3 to 5 air changes per
hour) E11 Provide extract ventilation
to points where emissions occur E54
Wear chemically resistant gloves
(tested to EN374) in combination with
specific activity training . PPE17
With LEV 20 80 4 2.14 80 0.43 0.06 0.15 0.21 Carry out in a vented booth or
extracted enclosure E57 Wear
suitable gloves tested to
EN374.PPE15 Provide a good
standard of general ventilation (3 to 5
air changes per hour) E11
With LEV 100 90 5.95 90% effic LEV
2.14 90 0.21 0.85 0.07 0.92 Minimise exposure by enclosing the
required (= E60)
operation or equipment and provide
: additional GV
extract ventilation at openings E60
(E11) ; trained
Provide GV E11 Wear chemically
personnel
resistant gloves (tested to EN374) in
(0.85x)
combination with ‘basic’ employee
training PPE16 Ensure operatives are
trained to minimise exposures EI19
Segregate the activity away from other
operations E63
No LEV 20 90 2 RPE APF 10
64.2 98 1.28 0.03 0.44 0.47 If technical measures not practical:
(x0.05)
G16 Provide a good standard of
controlled ventilation (10 to 15 air
changes per hour). E11 Limit the
substance content in the product to 25
% OC18 Wear a respirator conforming
to EN140 with Type A filter or better
PPE22. Wear chemically resistant
gloves (tested to EN374) in
combination with intensive
management supervision
controls.PPE18 Cover skin PPE 27
Segregate the activity away from other
operations E63
No LEV 100 95 3 RPE APF 20
64.2 98 1.28 0.43 0.44 0.87 Provide a good standard of controlled
(x0.05) ;