EU-SICHERHEITSDATENBLATT Dieselkraftstoff ... - Schmierstoffe
EU-SICHERHEITSDATENBLATT Dieselkraftstoff ... - Schmierstoffe EU-SICHERHEITSDATENBLATT Dieselkraftstoff ... - Schmierstoffe
Industrial -SU3 Remanufacture of CS19 Daily; 1-4 hours; Retain drainings in PROC9 - Transfer reject articles ambient temp; sealed storage pending of chemicals into disposal. PPE. small containers Industrial -SU3 Storage CS67 Daily; 8 hrs; ambient samples collected at PROC1/2 Closed temp; dedicated sample point continuous process (sometimes with sampling) Use as a lubricant Professional - General exposures CS15 Continuous; daily; Closed processes PROC1 and SU22 from enclosed ambient temp. PROC2 Closed processes process Combine with row Professional - General exposures CS15 Continuous; daily; Enclosed process; ; PROC3 Closed above in narrative SU22 from closed processes ambient temp. closed/semi-closed batch process (with sampling point sampling) Professional - Operation of equipment CS26 Daily; >4 hours, ambient None. Fluid inside PROC 20 Heat SU22 containing engine oils equipment and pressure and similar transfer fluids (closed systems) PROC4 not in ATIEL Professional - General exposures CS16 Continuous; daily; Enclosed transfers, PROC4 Batch mapping SU22 from open processes ambient temp. process with exposure Combine in narrative Professional - General exposures CS16 Continuous; daily; Enclosed transfers, PROC4 Batch SU22 from open processes ambient temp. process with (vapour phase) exposure Professional - Bulk transfers (e.g. CS14 Daily; 1-4 hour; ambient Enclosed transfers, clear PROC8b SU22 deliveries to temp. lines prior to decoupling Dedicated dealerships) Discharging to/from vessels Professional - Filling preparation of CS45, CS81 Daily; 15 mins - 1 hour; Pumped transfer or use PROC8b SU22 equipment from drums ambient temp of dedicated container. Discharging or containers - Eye protection, Gloves, to/from vessels dedicated facility Apron (dedicated) Professional - Filling preparation of CS45, CS82 Daily; 15 mins - 1 hour; Pumped transfer or use PROC8a Nondedicated SU22 equipment from drums ambient temp of dedicated container. or containers - non Eye protection, Gloves, discharging dedicated facility Apron Combine in narrative Professional - Operation and CS17, OC8 Continuous; daily; Restrict area of PROC 17 SU22 lubrication of high (indoor) ambient temp. Indoors openings; extract Lubrication at high energy open equipment ventilation to emission energy conditions points Professional - Operation and CS17, OC8 Continuous; daily; Restrict area of PROC 17 SU22 lubrication of high ambient temp. openings; extract Lubrication at high energy open equipment ventilation to emission energy conditions (vapour phase) points Combine in narrative Professional - Operation and CS17, OC8 Continuous; daily; Restrict area of PROC 18 - SU22 lubrication of high ambient temp. openings; extract Greasing at high energy open equipment ventilation to emission energy conditions points Professional - Operation and CS17, OC8 Continuous; daily; Restrict area of PROC 18 - SU22 lubrication of high ambient temp. openings; extract Greasing at high energy open equipment ventilation to emission energy conditions (vapour phase) points Covers total loss Professional - Operation and CS17, OC9 Continuous; daily; Total loss systems PROC 17 equipment with spray SU22 lubrication of high (outdoor) ambient temp. Outdoors Lubrication at high potential, e.g. chain energy open energy conditions saws equipment, e.g. chain saw Professional - Operation and CS17, OC9 Continuous; daily; Total loss systems PROC 17 SU22 lubrication of high ambient temp. Lubrication at high energy open equipment energy conditions (vapour phase) Combine in narrative Professional - Maintenance and CS77 Daily; 1-4 hours; Enclosed PROC8b SU22 machine set-up ambient temp; transfers,vented transfer Dedicated points;; clear lines prior discharging to/from to decoupling vessels daily; ambient temp. daily; ambient temp. >4 hours, ambient temp. >4 hours, ambient temp. > 4 hours; daily; ambient temp. >4 hours, ambient temp. >4 hours, ambient temp. 4 hours, ambient temp. >4 hours, ambient temp. 1-4 hours, ambient temp. 1-4 hours, ambient temp. 1-4 hours daily; ambient temp. No LEV 5 0 5 6.86 80 1.372 0.07 0.47 0.55 Provide a good standard of controlled ventilation (10 to 15 air changes per hour). E11 Retain drain downs in sealed storage pending disposal or for subsequent recycle. ENVT4 Wear suitable gloves tested to EN374 PPE15 outdoor activity 0.5 0 0.5 0.14 0 0.14 0.01 0.05 0.06 Store substance within a closed system. E84 Transfer via enclosed lines. E52 Avoid dip sampling E42 No LEV 3 0 3 1.37 80 0.274 0.04 0.09 0.14 Handle substance within a closed system E47 Provide GV E40 Wear gloves when breaching PPE15 No LEV 3 0 3 0.34 0 0.34 0.04 0.12 0.16 Handle substance within a closed system E47 Provide GV E40 Wear gloves when breaching PPE15 No LEV 5 0 5 1.71 0 1.71 0.07 0.59 0.66 No special measures EIi18 Use in enclosed systems and restrict area of openings E49 Provide GV E11 With LEV 5 0 5 6.86 80 1.372 0.07 0.00 0.07 Provide extract ventilation to points where emissions occur E54 Wear suitable gloves tested to EN374 PPE15 With LEV 10 70 3 Enhanced GV 6.86 80 1.37 0.43 0.47 0.90 Provide a good standard of controlled ventilation (10 to 15 air changes per hour) E40 Provide extract ventilation to points where emissions occur E54 Wear suitable gloves tested to EN374 PPE15 No LEV 5 0 3 (
Professional - Maintenance and CS77 Daily; 1-4 hours; Enclosed transfers, PROC8b 1-4 hours daily; SU22 machine set-up Elevated temp (30o vented transfer points; Discharging elevated temp. above ambient) clear lines prior to to/from vessels decoupling (dedicated) Professional - Draining equipment CS18 Daily; 1-4 hours; Retain drainings in PROC8a 1-4 hours daily; SU22 (small items) e.g. Elevated temp (30o sealed storage pending Discharging elevated temp. engine drains above ambient) disposal. PPE. to/from vessels non dedicated Professional - Engine lubricant service CS78 Daily; 1-4 hours; None PROC9 - Transfer daily; ambient SU22 - to cover small ambient temp; of chemicals into temp. additions of oil to small containers engines Combine in narrative Professional - Manual roller CS13 Indoor, Daily; 8 hours, PPE. If LEV applied (to PROC 10 Roller or >4 hours, ambient 1. LEV SU22 application or brushing product temp (ambient); provide options for RMM) brush application temp. of coatings CS13 Automated replenishment of roller or brush 2. General ventilation Professional - Manual roller CS13 Indoor, Daily; 8 hours, PPE PROC 10 Roller or >4 hours, ambient SU22 application or brushing product temp (ambient), brush application temp. of coatings CS13 Automated replenishment of roller or brush 3. RPE Professional - Manual roller CS13 Indoor, Daily; 8 hours, PPE. If ventilation PROC 10 Roller or >4 hours, ambient SU22 application or brushing product temp (ambient), inadequate and RPE brush application temp. of coatings CS13 Automated applied (to provide replenishment of roller options for RMM) or brush; Solvent concentration 95% or greater for cleaners/ Combine in Professional - Spraying CS10 CS10 Indoor or outdoor, Daily; Respiratory protection, PROC 11 Spraying >4 hours, ambient narrative. SU22 15 min - 1 hour, product eye protection, gloves. If - non-industrial temp. 1. LEV temp (ambient), LEV applied (to provide selection of spray options for RMM) nozzles to avoid small droplet size to minimise product losses Vapour phase Professional - Spraying CS10 >4 hours, ambient Value for low SU22 temp. volatility liquid applied Combine in narrative Professional - Spraying CS10 CS10 Indoor or outdoor, Daily; Respiratory protection, PROC 11 Spraying >4 hours, ambient with 'alternative' SU22 15 min - 1 hour, product eye protection, gloves - non-industrial temp. phrases temp (ambient), 2. General ventilation selection of spray and RPE nozzles to avoid small droplet size to minimise product losses Vapour phase Professional - >4 hours, ambient Value for low SU22 temp. volatility liquid applied Professional - Treatment of articles by CS35 Indoor, Daily; 8 hours, Cabinet to allow the PROC 13 Dipping >4 hours, ambient SU22 dipping and pouring ambient temp, automatic dipping and the dripping and pouring temp. (CS35) dipping in a bath of the pieces. PPE Professional - Storage CS67 Daily; 8 hrs; ambient samples collected at PROC1 Closed daily; ambient SU22 temp; dedicated sample point continuous process temp. (sometimes with Metal working Industrial -SU3 General exposures CS15 Indoor, Daily; 8 hour; Closed processes PROC1 and >4 hours, ambient fluids / rolling oils (closed systems) ambient temp. PROC2 Closed temp. process Industrial -SU3 General exposures CS15 Indoor, Daily; 8 hour; Enclosed process; ; PROC3 Closed >4 hours, ambient (closed systems) , ambient temp. closed/semi-closed batch process (with temp. including closed EDM sampling point sampling) processes No LEV 25 80 5 1-4 hours daily 0.69 80 0.14 0.07 0.05 0.12 Provide extract ventilation to emission (0.6x); E67 points when contact with warm conveys 90% (>50oC) lubricant is likely) E67 Clear efficiency transfer lines prior to decoupling E39 Wear suitable gloves tested to EN374 PPE15 Provide a good standard of general No LEV 50 80 7 SOP re drain 13.71 90 1.37 0.10 0.47 0.58 downs (E81); ventilation (3 to 5 air changes per Good general hour) E11 Drain or remove substance ventilation from equipment prior to break-in or (0.7x); maintenance E81. Wear chemically resistant gloves (tested to EN374) in combination with ‘basic’ employee training.. PPE16 Retain drain downs in sealed storage pending disposal or for subsequent recycle. ENVT4. No LEV 5 0 5 6.86 90 0.69 0.07 0.24 0.31 Provide a good standard of general ventilation (3 to 5 air changes per hour) E11 Wear suitable gloves tested to EN374 with basic training PPE16 No LEV 5 0 5 27.43 95 1.37 0.07 0.47 0.55 Provide a good standard of general ventilation (3 to 5 air changes per hour) E11 Provide extract ventilation to points where emissions occur E54 Wear chemically resistant gloves (tested to EN374) in combination with specific activity training . PPE17 No LEV 5 0 5 27.43 95 1.37 0.07 0.47 0.55 Provide a good standard of general ventilation (3 to 5 air changes per hour) E11 Provide extract ventilation to points where emissions occur E54 Wear chemically resistant gloves (tested to EN374) in combination with specific activity training . PPE17 No LEV 5 0 5 27.43 95 1.37 0.07 0.47 0.55 Provide a good standard of general ventilation (3 to 5 air changes per hour) E11 Provide extract ventilation to points where emissions occur E54 Wear chemically resistant gloves (tested to EN374) in combination with specific activity training . PPE17 With LEV 20 80 4 2.14 80 0.43 0.06 0.15 0.21 Carry out in a vented booth or extracted enclosure E57 Wear suitable gloves tested to EN374.PPE15 Provide a good standard of general ventilation (3 to 5 air changes per hour) E11 With LEV 100 90 5.95 90% effic LEV 2.14 90 0.21 0.85 0.07 0.92 Minimise exposure by enclosing the required (= E60) operation or equipment and provide : additional GV extract ventilation at openings E60 (E11) ; trained Provide GV E11 Wear chemically personnel resistant gloves (tested to EN374) in (0.85x) combination with ‘basic’ employee training PPE16 Ensure operatives are trained to minimise exposures EI19 Segregate the activity away from other operations E63 No LEV 20 90 2 RPE APF 10 64.2 98 1.28 0.03 0.44 0.47 If technical measures not practical: (x0.05) G16 Provide a good standard of controlled ventilation (10 to 15 air changes per hour). E11 Limit the substance content in the product to 25 % OC18 Wear a respirator conforming to EN140 with Type A filter or better PPE22. Wear chemically resistant gloves (tested to EN374) in combination with intensive management supervision controls.PPE18 Cover skin PPE 27 Segregate the activity away from other operations E63 No LEV 100 95 3 RPE APF 20 64.2 98 1.28 0.43 0.44 0.87 Provide a good standard of controlled (x0.05) ;
- Page 101 and 102: Vacuum Gas Oils, Hydrocracked Gas O
- Page 103 and 104: Vacuum Gas Oils, Hydrocracked Gas O
- Page 105 and 106: Vacuum Gas Oils, Hydrocracked Gas O
- Page 107 and 108: Vacuum Gas Oils, Hydrocracked Gas O
- Page 109 and 110: Vacuum Gas Oils, Hydrocracked Gas O
- Page 111 and 112: Vacuum Gas Oils, Hydrocracked Gas O
- Page 113 and 114: Vacuum Gas Oils, Hydrocracked Gas O
- Page 115 and 116: Vacuum Gas Oils, Hydrocracked Gas O
- Page 117 and 118: Vacuum Gas Oils, Hydrocracked Gas O
- Page 119 and 120: Vacuum Gas Oils, Hydrocracked Gas O
- Page 121 and 122: Vacuum Gas Oils, Hydrocracked Gas O
- Page 123 and 124: Gas Oils (Vacuum) 4 DNEL (inhalatio
- Page 125 and 126: Industrial - Tabletting, CS100 Indo
- Page 127 and 128: Combined Professional - Manual spra
- Page 129 and 130: Industrial - Bulk transfers CS14 Da
- Page 131 and 132: Professional - Maintenance and CS77
- Page 133 and 134: Note: differentiated Industrial -SU
- Page 135 and 136: Professional - Treatment and dispos
- Page 137 and 138: Industrial - operation of open CS16
- Page 139 and 140: Vacuum Gas Oils, Hydrocracked Gas O
- Page 141 and 142: Vacuum Gas Oils, Hydrocracked Gas O
- Page 143 and 144: Vacuum Gas Oils, Hydrocracked Gas O
- Page 145 and 146: Gas Oils (Vacuum) 4 DNEL (inhalatio
- Page 147 and 148: Industrial - Tabletting, CS100 Indo
- Page 149 and 150: Combined Professional - Manual spra
- Page 151: Industrial - Bulk transfers CS14 Da
- Page 155 and 156: Note: differentiated Industrial -SU
- Page 157 and 158: Professional - Treatment and dispos
- Page 159 and 160: Industrial - operation of open CS16
- Page 161 and 162: Vacuum Gas Oils, Hydrocracked Gas O
- Page 163 and 164: Vacuum Gas Oils, Hydrocracked Gas O
- Page 165 and 166: This tool is provided for informati
- Page 167 and 168: An Evaluation of the Persistence, B
- Page 169 and 170: Table of Contents Executive Summary
- Page 171 and 172: 2.0 Outline of PBT/vPvB Assessment
- Page 173 and 174: 3.0 Persistence Assessment of Petro
- Page 175 and 176: 100.0 Half-life predicted (days) 10
- Page 177 and 178: 2,3-dimethylheptane 9 7.7 6.2 7.4 2
- Page 179 and 180: ioHCwin half-life (days) 10000.0 10
- Page 181 and 182: criterion. It can be concluded that
- Page 183 and 184: ioHCwin half-life (days) 100000.0 1
- Page 185 and 186: Hydrocarbon C nr BioHCwin Predicted
- Page 187 and 188: ioHCwin half-life (days) 1000000.0
- Page 189 and 190: ioHCwin half-life (days) 1000.0 100
- Page 191 and 192: Hydrocarbon C nr BioHCwin Predicted
- Page 193 and 194: enzo[a]pyrene 20 421.6 16.5 Table 1
- Page 195 and 196: (see Appendix 2). Since BCF predict
- Page 197 and 198: 10000 BCF (Arnot) 1000 100 10 1 n-P
- Page 199 and 200: exhibit BMFs near unity (Figure 28)
- Page 201 and 202: 2,2,4,4,6,8,8- heptamethyl nonane 1
Industrial -SU3 Remanufacture of CS19 Daily; 1-4 hours; Retain drainings in PROC9 - Transfer<br />
reject articles<br />
ambient temp; sealed storage pending of chemicals into<br />
disposal. PPE.<br />
small containers<br />
Industrial -SU3 Storage CS67 Daily; 8 hrs; ambient samples collected at PROC1/2 Closed<br />
temp;<br />
dedicated sample point continuous process<br />
(sometimes with<br />
sampling)<br />
Use as a lubricant Professional - General exposures CS15 Continuous; daily; Closed processes PROC1 and<br />
SU22 from enclosed<br />
ambient temp.<br />
PROC2 Closed<br />
processes<br />
process<br />
Combine with row Professional - General exposures CS15 Continuous; daily; Enclosed process; ; PROC3 Closed<br />
above in narrative SU22 from closed processes<br />
ambient temp. closed/semi-closed batch process (with<br />
sampling point<br />
sampling)<br />
Professional - Operation of equipment CS26 Daily; >4 hours, ambient None. Fluid inside PROC 20 Heat<br />
SU22 containing engine oils<br />
equipment<br />
and pressure<br />
and similar<br />
transfer fluids<br />
(closed systems)<br />
PROC4 not in ATIEL Professional - General exposures CS16 Continuous; daily; Enclosed transfers, PROC4 Batch<br />
mapping<br />
SU22 from open processes<br />
ambient temp.<br />
process with<br />
exposure<br />
Combine in narrative Professional - General exposures CS16 Continuous; daily; Enclosed transfers, PROC4 Batch<br />
SU22 from open processes<br />
ambient temp.<br />
process with<br />
(vapour phase)<br />
exposure<br />
Professional - Bulk transfers (e.g. CS14 Daily; 1-4 hour; ambient Enclosed transfers, clear PROC8b<br />
SU22 deliveries to<br />
temp.<br />
lines prior to decoupling Dedicated<br />
dealerships)<br />
Discharging<br />
to/from vessels<br />
Professional - Filling preparation of CS45, CS81 Daily; 15 mins - 1 hour; Pumped transfer or use PROC8b<br />
SU22 equipment from drums<br />
ambient temp<br />
of dedicated container. Discharging<br />
or containers -<br />
Eye protection, Gloves, to/from vessels<br />
dedicated facility<br />
Apron<br />
(dedicated)<br />
Professional - Filling preparation of CS45, CS82 Daily; 15 mins - 1 hour; Pumped transfer or use PROC8a Nondedicated<br />
SU22 equipment from drums<br />
ambient temp<br />
of dedicated container.<br />
or containers - non<br />
Eye protection, Gloves, discharging<br />
dedicated facility<br />
Apron<br />
Combine in narrative Professional - Operation and<br />
CS17, OC8 Continuous; daily; Restrict area of PROC 17<br />
SU22 lubrication of high (indoor) ambient temp. Indoors openings; extract Lubrication at high<br />
energy open equipment<br />
ventilation to emission energy conditions<br />
points<br />
Professional - Operation and<br />
CS17, OC8 Continuous; daily; Restrict area of PROC 17<br />
SU22 lubrication of high<br />
ambient temp. openings; extract Lubrication at high<br />
energy open equipment<br />
ventilation to emission energy conditions<br />
(vapour phase)<br />
points<br />
Combine in narrative Professional - Operation and<br />
CS17, OC8 Continuous; daily; Restrict area of PROC 18 -<br />
SU22 lubrication of high<br />
ambient temp. openings; extract Greasing at high<br />
energy open equipment<br />
ventilation to emission energy conditions<br />
points<br />
Professional - Operation and<br />
CS17, OC8 Continuous; daily; Restrict area of PROC 18 -<br />
SU22 lubrication of high<br />
ambient temp. openings; extract Greasing at high<br />
energy open equipment<br />
ventilation to emission energy conditions<br />
(vapour phase)<br />
points<br />
Covers total loss Professional - Operation and<br />
CS17, OC9 Continuous; daily; Total loss systems PROC 17<br />
equipment with spray SU22 lubrication of high (outdoor) ambient temp. Outdoors<br />
Lubrication at high<br />
potential, e.g. chain<br />
energy open<br />
energy conditions<br />
saws<br />
equipment, e.g. chain<br />
saw<br />
Professional - Operation and<br />
CS17, OC9 Continuous; daily; Total loss systems PROC 17<br />
SU22 lubrication of high<br />
ambient temp.<br />
Lubrication at high<br />
energy open equipment<br />
energy conditions<br />
(vapour phase)<br />
Combine in narrative Professional - Maintenance and<br />
CS77 Daily; 1-4 hours; Enclosed<br />
PROC8b<br />
SU22 machine set-up<br />
ambient temp; transfers,vented transfer Dedicated<br />
points;; clear lines prior discharging to/from<br />
to decoupling<br />
vessels<br />
daily; ambient<br />
temp.<br />
daily; ambient<br />
temp.<br />
>4 hours, ambient<br />
temp.<br />
>4 hours, ambient<br />
temp.<br />
> 4 hours; daily;<br />
ambient temp.<br />
>4 hours, ambient<br />
temp.<br />
>4 hours, ambient<br />
temp.<br />
4 hours, ambient<br />
temp.<br />
>4 hours, ambient<br />
temp.<br />
1-4 hours,<br />
ambient temp.<br />
1-4 hours,<br />
ambient temp.<br />
1-4 hours daily;<br />
ambient temp.<br />
No LEV 5 0 5 6.86 80 1.372 0.07 0.47 0.55 Provide a good standard of controlled<br />
ventilation (10 to 15 air changes per<br />
hour). E11 Retain drain downs in<br />
sealed storage pending disposal or for<br />
subsequent recycle. ENVT4 Wear<br />
suitable gloves tested to EN374<br />
PPE15<br />
outdoor activity 0.5 0 0.5 0.14 0 0.14 0.01 0.05 0.06 Store substance within a closed<br />
system. E84 Transfer via enclosed<br />
lines. E52 Avoid dip sampling E42<br />
No LEV 3 0 3 1.37 80 0.274 0.04 0.09 0.14 Handle substance within a closed<br />
system E47 Provide GV E40 Wear<br />
gloves when breaching PPE15<br />
No LEV 3 0 3 0.34 0 0.34 0.04 0.12 0.16 Handle substance within a closed<br />
system E47 Provide GV E40 Wear<br />
gloves when breaching PPE15<br />
No LEV 5 0 5 1.71 0 1.71 0.07 0.59 0.66 No special measures EIi18 Use in<br />
enclosed systems and restrict area of<br />
openings E49 Provide GV E11<br />
With LEV 5 0 5 6.86 80 1.372 0.07 0.00 0.07 Provide extract ventilation to points<br />
where emissions occur E54 Wear<br />
suitable gloves tested to EN374<br />
PPE15<br />
With LEV 10 70 3 Enhanced GV 6.86 80 1.37 0.43 0.47 0.90 Provide a good standard of controlled<br />
ventilation (10 to 15 air changes per<br />
hour) E40 Provide extract ventilation<br />
to points where emissions occur E54<br />
Wear suitable gloves tested to EN374<br />
PPE15<br />
No LEV 5 0 3 (