EU-SICHERHEITSDATENBLATT Dieselkraftstoff ... - Schmierstoffe

Industrial - Bulk transfers CS14 Daily; 15 min - 1 hour;
SU3/ SU10
product temp; collection
of line waste in container
Combine in narrative Industrial -SU3 Filling preparation of CS45 Daily; 15 mins - 1 hour;
equipment from drums
ambient temp
or containers
Industrial -SU3 Filling preparation of CS45 Daily; 15 mins - 1 hour;
equipment from drums
ambient temp
or containers
Industrial -SU3 Initial Factory fill of CS75 Continuous; 8 hours;
equipment
daily; ambient temp.
Combine in narrative Industrial -SU3 Operation and
CS17 Indoor, Daily; 8 hours;
lubrication of high
ambient temp.
energy open equipment
Industrial -SU3 Operation and
CS17 Continuous; daily;
lubrication of high
ambient temp.
energy open equipment
(vapour phase)
Industrial -SU3 Operation and
CS17 Continuous; daily;
lubrication of high
ambient temp.
energy open equipment
Industrial -SU3 Operation and
CS17 Continuous; daily;
lubrication of high
ambient temp.
energy open equipment
(vapour phase)
Industrial -SU3 Manual roller
CS13 Indoor, Daily; 8 hours,
application or brushing
ambient temp,
Automated
replenishment of roller
or brush
Industrial -SU3 Treatment of articles by CS35 Indoor, Daily; 8 hours,
dipping and pouring
ambient temp, automatic
dipping in a bath
Combine in narrative Industrial -SU3 Spraying CS10 Indoor, Daily; 8 hours,
ambient temp,
automated spraying
Industrial -SU3 Spraying (vapour CS10 automatic spraying at
phase)
room temperature
continuous
Combine in narrative Industrial -SU3 Maintenance (of larger CS77 Daily; 1-4 hours;
plant items) and
ambient temp;
machine set-up
Industrial -SU3 Maintenance (of larger CS77 Daily; 1-4 hours;
plant items) and
Elevated temp (30o
machine set-up
above ambient)
Industrial -SU3 Draining equipment CS18 Daily; 1 - 4 hours;
(small items)
ambient temp.
Enclosed transfers, PROC8b
daily; ambient
vented transfer points; Dedicated temp.
clear lines prior to discharging to/from
decoupling
vessels
Manual filling of PROC8a Nondedicated
temp.
4 hours, ambient
openings; extract Lubrication at high temp.
ventilation to emission energy conditions
points; PPE
Restrict area of PROC 17 >4 hours, ambient
openings; extract Lubrication at high temp.
ventilation to emission energy conditions
points; PPE
Restrict area of PROC 18 - >4 hours, ambient
openings; extract Greasing at high temp.
ventilation to emission energy conditions
points; PPE
Restrict area of PROC 18 - >4 hours, ambient
openings; extract Greasing at high temp.
ventilation to emission energy conditions
points; PPE
PPE PROC 10 Roller or >4 hours, ambient
brush application temp.
Cabinet to allow the PROC 13 Dipping >4 hours, ambient
dipping and the dripping and pouring temp.
of the pieces. PPE
LEV, Spraying cabinet PROC 7 >4 hours, ambient
with capture of the
temp.
aerosols, PPE
spraying cabinet with PROC 7 >4 hours, ambient
capture of the aerosols
temp.
Enclosed
PROC8b >4 hours, ambient
transfers,vented transfer Discharging temp.
points; clear lines prior to to/from vessels
decoupling; PPE (dedicated)
Enclosed transfers, PROC8b >4 hours, ambient
vented transfer points; Discharging temp.
clear lines prior to to/from vessels
decoupling; PPE (dedicated)
Retain drainings in PROC8a 50oC) lubricant is likely) E67 Clear
transfer lines prior to decoupling E39
Wear suitable gloves (tested to
EN374) PPE15
No LEV 5 0 5 13.71 90 1.371 0.07 0.47 0.55 Provide a good standard of controlled
ventilation (10 to 15 air changes per
hour). E11 Wear chemically resistant
gloves (tested to EN374) in
combination with ‘basic’ employee
training. PPE16 Avoid manual contact
with wet work pieces EI17 Retain drain
downs in sealed storage pending
disposal or for subsequent recycle.
ENVT4