EU-SICHERHEITSDATENBLATT Dieselkraftstoff ... - Schmierstoffe

Industrial -SU3 Dipping, immersion [CS4] Daily; >4 hours, product Local exhaust ventilation 13 -Treatment of
and pouring. [CS4]
temp. (ambient) at open surface; remove articles by dipping
spills as they occur, PPE and pouring
Industrial -SU3 Laboratory activities [CS36] small scale activities
15 - Use of
[CS36]
small amount, daily 15
laboratory
min
reagents in small
scale laboratories
Industrial -SU3 Material transfers [CS3]. [CS8]. Daily; 15 min - 1 hour; wear goggles and gloves 9 -Transfer of
[CS3]. Drum/batch [CS22]. product temp;
chemicals into
transfers [CS8].
small containers
Transfer from/pouring
(dedicated filling
from containers [CS22].
line)
Industrial -SU3 Production of
[CS100]. Daily; 15 min - 1 hour; wear goggles and gloves 14 - Production of
preparations or articles
product temp (ambient);
preparations or
by tabletting,
articles by
compression, extrusion,
tabletting,
pelletisation [CS100].
compression,
extrusion,
Industrial - Clean down and CS39 Indoor, Daily; 1 - 4 Enclosed lines; retain PROC8a Nondedicated
SU3/ SU10 Maintenance
hours; product temp; wash down in sealed
collection of line waste storage pending disposal discharging to/from
in container
or use as recycled vessels
material for subsequent
formulation. PPE.
Industrial - Storage CS67 Daily; 8 hrs; product samples collected at PROC1/2 Closed
SU3/ SU10
temp;
dedicated sample point continuous process
(sometimes with
sampling)
Uses in Coatings Professional - Filling / preparation of [CS45] closed, continuous PROC8b
SU22 equipment (from drums
Dedicated
or containers). CS45]
discharging to/from
vessels
Professional - General exposures [CS15 ] Continuous; daily; 8hour Enclosed process; PROC1/2 Closed
SU22 (closed systems)
closed/semi-closed continuous process
[CS15]. Use in
sampling point
(with sampling)
contained systems
[CS38]
Professional - Preparation of material [CS 96].
closed, continuous 3 - Use in closed
SU22 for application. [CS 96]. [CS29].
batch process
Mixing operations
(synthesis or
(closed systems)
formulation)
[CS29].
Combined Professional - Film formation - air [CS95]. outdoor 4 - Use in batch
SU22 drying. [CS95]. Outdoor [OC9].
and other process
[OC9].
(synthesis) where
opportunity for
exposure arises
Professional - Film formation - air [CS95]. Daily; >4 hours, product Good general ventilation 4 - Use in batch
SU22 drying. [CS95]. Indoor [OC8]. temp (ambient); Indoor (equivalent to outdoors) and other process
[OC8].
supplemenetd with LEV (synthesis) where
opportunity for
exposure arises
Combined Professional - Preparation of material [CS 96] . indoor, outdoor with and batch, indoor. With and 5 -Mixing or
SU22 for application. [CS 66] [CS30]. without LEV, 1 - 4 hours without LEV.
blending in batch
Mixing operations (open [CS9]. [OC8].
processes
systems) [CS30].
(multistage and/or
Pouring from small
significant contact)
containers [CS9].
Indoor [OC8].
Professional - Preparation of material [CS 96] Outdoor; 1 - 4 hours 5 -Mixing or
SU22 for application. [CS 66] [CS30] [CS9]
blending in batch
Mixing operations (open [OC9]
processes
systems) [CS30].
(multistage and/or
Pouring from small
significant contact)
containers [CS9].
Outdoor [OC9].
Professional - Material transfers. [CS3] Daily; 15 mins - 1 hour; Pumped transfer from 8a -Transfer of
SU22 [CS3]. Pumped [CS107] product temp (ambient), drum to equipment. with chemicals from/to
Drum/batch transfers [CS8] indoor, outdoor and without LEV vessels/ large
[CS8].
containers at non
dedicated facilities
comined Professional - Roller, spreader, flow [CS98] [OC8] indoor, Daily, > 4 hours 10 - Roller
SU22 application. [CS69].
application or
Indoor [OC8].
brushing
Professional - Roller, spreader, flow [CS98]. outdoor, Daily, >4 hours PPE 10 - Roller
SU22 application. [CS69]. [OC9].
application or
Outdoor [OC9].
brushing
daily; ambient No LEV 1 0 1.0 6.86 80 1.37 0.01 0.47 0.49 Provide extract ventilation to points
temp.
where emissions occur E54 Wear
suitable gloves tested to EN374
PPE15 Avoid manual contact with wet
work pieces EI17 Clear up spills
immediately and dispose of waste
safely E19
>4 hours, ambient No LEV 0.5 0 0.5 0.34 0 0.34 0.01 0.12 0.12 No sppecial measures EI18 Handle in
temp.
a fume cupboard or under extract
ventilation E83 Wear suitable gloves
tested to EN374 PPE15
>4 hours, ambient No LEV 5 0 5.0 Use of drum
6.86 80 1.37 0.07 0.47 0.55 Use drum pumps or carefully pour from
temp.
pumps
container E64. Wear suitable gloves
tested to EN374 PPE15 Avoid spillage
when withdrawing pump C&H16
Ensure material transfers are under
containment or extract ventilation E66
>4 hours, ambient No LEV 5 0 5.0 3.43 0 0.34 0.07 0.12 0.19 No specific measures identified EI18
temp.
Provide extract ventilation to points
where emissions occur E54 Wear
suitable gloves tested to EN374
PPE15
daily; ambient No LEV 10 80 2 LEV
13.71 90 1.37 0.03 0.47 0.50 Drain down system prior to equipment
temp.
effectiveness
break-in or maintenance. E65 Wear
assumed to
chemically resistant gloves (tested to
equate to SOP
EN374) in combination with ‘basic’
relating to
employee training PPE16 Wear
draining etc
suitable coveralls to prevent exposure
prior to
to the skin PPE27 Retain drain downs
maintence
in sealed storage pending disposal or
daily; ambient outdoor activity 1 0 1 1.37 0 1.37 0.01 0.47 0.49 Store
for s bseq
substance
ent rec
within
cle
a
ENVT4
closed
temp.
system. E84 Transfer via enclosed
lines. E52 Avoid dip sampling E42
>4 hours, ambient No LEV 5 0 5 6.86 80 1.37 0.07 0.47 0.55 Use drum pumps or carefully pour from
temp.
container [E64]. Ensure material
transfers are under containment or
extract ventilation [E66]. Wear suitable
gloves tested to EN374 [PPE15]
provide GV E11
>4 hours, ambient No LEV 1 0 1 1.37 0 1.37 0.01 0.47 0.49 Handle substance within a closed
temp.
system [E47]. Provide extract
ventilation to points where emissions
occur [E54]. [Wear suitable gloves
tested to EN374] [PPE15].
daily; ambient No LEV 1 0 1 0.34 0 0.34 0.01 0.12 0.13 No special measures EI18 GV E40
temp.
{Clear up spills immediately and
dispose of waste safely [EI9]}. {Wear
suitable gloves tested to EN374
[PPE15]}.
8 hrs No LEV 5 0 5 6.86 80 1.37 0.07 0.47 0.55 Ensure operation is undertaken
outdoors [E69]. Wear suitable gloves
tested to EN374 [PPE15]. Ensure
operatives are trained to minimise
exposures EI19 [Avoid manual contact
with wet work pieces] [EI17]
daily; ambient No LEV 5 0 5 6.86 80 1.37 0.07 0.47 0.55 Provide GV [E40]. Wear suitable
temp.
gloves tested to EN374 [PPE15]
Ensure operatives are trained to
minimise exposures EI19 [Avoid
manual contact with wet work pieces]
[EI17]
>4 hours, ambient No LEV 5 0 5 13.71 90 1.37 0.07 0.47 0.55 Provide a good standard of general or
temp.
controlled ventilation (5 to 15 air
changes per hour) (E11] Wear
chemically resistant gloves (tested to
EN374) in combination with ‘basic’
employee training. [PPE16].
>4 hours, ambient No LEV 5 0 5 13.71 90 1.37 0.07 0.47 0.55 Ensure operation is undertaken
temp.
outdoors (E69] Wear chemically
resistant gloves (tested to EN374) in
combination with ‘basic’ employee
training. [PPE16].
daily; ambient No LEV 5 0 5 13.71 90 1.37 0.07 0.47 0.55 Provide GV E40 or outdoors E69 Use
temp.
drum pumps or carefully pour from
container E64 Wear chemically
resistant gloves (tested to EN374) in
combination with ‘basic’ employee
training. [PPE16].
> 4 hours; daily; With LEV 5 0 5 16.46 90 1.65 0.07 0.57 0.64 Use ventilation to extract vapours from
ambient temp;
freshly coated articles/objects and
4 hours; daily; No LEV 5 0 5 16.46 90 1.65 0.07 0.57 0.64 Use ventilation to extract vapours from
ambient temp.
freshly coated articles/objects and
surfaces[E56]}. Wear chemically
resistant gloves (tested to EN374) in
combination with ‘basic’ employee
training. [PPE16].Limit the substance
content in the product to 25 % OC18
Ensure operatives are trained to
minimise exposures EI19 Use long
handled brushes and rollers where
gloves
gloves