EU-SICHERHEITSDATENBLATT Dieselkraftstoff ... - Schmierstoffe

Industrial - Tabletting,
CS100 Indoor; daily; 8 hours; LEV, PPE PROC14
SU3/ SU10 compression, extrusion
product temp.
Production of
or pelletisation
preparation by
tabletting,
compression,
Industrial - Drum and small CS6 Indoor, Continuous; Enclosed transfers, PROC9 Transfer
SU3/ SU10 package filling
daily; 8 hour; product vented transfer points of
temp.
substance/mixture
into small
containers
Industrial - Clean down and CS39 Indoor, Daily; 1 - 4 Enclosed lines; retain PROC8a Nondedicated
SU3/ SU10 Maintenance
hours; product temp; wash down in sealed
collection of line waste storage pending disposal discharging to/from
in container
or use as recycled vessels
material for subsequent
formulation. PPE.
Industrial - Storage CS67 Daily; 8 hrs; product samples collected at PROC1/2 Closed
SU3/ SU10
temp;
dedicated sample point continuous process
(sometimes with
sampling)
Uses in Coatings Industrial -SU3 General exposures CS15 ] Continuous; daily; 8hour Enclosed process; 1/2 -Use in closed,
(closed systems) CS15 [CS56]
closed/semi-closed continuous
] with sample collection
sampling point
process with occasional
controlled
[CS56].
exposure (e.g.
sampling)
Industrial - Bulk transfers CS14 Daily; 15 min - 1 hour; Enclosed transfers, PROC8b
SU3/ SU10
product temp; collection vented transfer points; Dedicated
of line waste in container clear lines prior to discharging to/from
decoupling
vessels
Industrial -SU3 Film formation - force [CS 94] enclosed in situ in 2 -Use in closed,
drying (50 - 100°C).
workplace
continuous
Stoving (>100°C).
process with occasional
controlled
UV/EB radiation curing.
[CS 94]
exposure (e.g.
sampling)
Industrial -SU3 Film formation - air [CS95] 4 - Use in batch
drying. [CS95]
and other process
(synthesis) where
opportunity for
exposure arises
Industrial -SU3 Preparation of material [CS 96]
liquid/ powder products) - 5 - Mixing or
for application. [CS 96] [CS30]
batch, indoor/ outdoor. blending in batch
Mixing operations (open
processes for
systems) [CS30]
formulation of
preparations and
combine Industrial -SU3 Spraying
[CS97] Daily; >4 hours, product Enclosed. Vented spray 7 -Industrial
(automatic/robotic).
temp (ambient) booth; specific workforce spraying
[CS97]
education, PPE
Industrial -SU3 Spraying
[CS97] Daily; >4 hours, product Enclosed. Vented spray 7 -Industrial
(automatic/robotic).
temp (ambient) booth; specific workforce spraying
[CS97] vapours
education, PPE
combine Industrial -SU3 Manual spraying. [CS24] Open , Air supplied 7 -Industrial
[CS24]
masks, respirator. spraying
Industrial -SU3 Manual spraying. [CS24] Open , Air supplied 7 -Industrial
[CS24] vapours
masks, respirator. spraying
Industrial -SU3 Material transfers. CS3 Daily; 15 min - 1 hour; Enclosed transfers, 8b -Transfer of
[CS3].
product temp (ambient); vented transfer points; chemicals from/to
collection of line waste clear lines prior to vessels/ large
in container. outdoor/ decoupling
containers at
indoor.
dedicated facilities.
Industrial -SU3 Roller, spreader, flow [CS69] Daily; >4 hours, product Local exhaust ventilation 10 - Roller
application. [CS69]
temp. (ambient); Range at rollers; remove spills application or
from 2-3% upto 40-50% as they occur, PPE. brushing
Large scale (open
equipment)
daily; ambient
temp.
daily; ambient
temp.
daily; ambient
temp.
daily; ambient
temp.
>4 hours, ambient
temp.
daily; ambient
temp.
>4 hours, ambient
temp.
daily; ambient
temp.
>4 hours, ambient
temp.
daily; ambient
temp.
daily; ambient
temp.
> 4 hours; daily;
ambient temp.
> 4 hours; daily;
ambient temp.
daily; ambient
temp.
> 4 hours; daily;
ambient temp.
No LEV 5 0 5 3.43 80 0.69 0.07 0.24 0.31 Provide extract ventilation to points
where emissions occur E54 Wear
suitable gloves tested to EN374
PPE15
No LEV 5 0 5 6.86 80 1.372 0.07 0.47 0.55 Fill containers/cans at dedicated fill
points supplied with local extract
ventilation E51 Clear spills
immediately C&H13 Wear suitable
gloves tested to EN374 PPE15 Put lids
on containers immediately after use E9
No LEV 10 80 2 LEV
13.71 90 1.371 0.03 0.47 0.50 Apply vessel entry procedures
effectiveness
including use of forced supplied air.
assumed to
AP15 Drain down system prior to
equate to SOP
equipment break-in or maintenance
relating to
E65 Transfer via enclosed lines E52
draining etc
Wear suitable gloves tested to EN374
prior to
PPE16 Wear suitable coveralls to
maintence
prevent exposure to the skin PPE27
Retain drain downs in sealed storage
pending disposal or for subsequent
recycle. ENVT4
outdoor activity 1 0 1 1.37 0 1.37 0.01 0.47 0.49 Store substance within a closed
system. E84 Transfer via enclosed
lines. E52 Avoid dip sampling E42
No LEV 1 0 1.0 0.03 0 0.03 0.01 0.01 0.02 Handle substance within a closed
system E47 Ensure material transfers
are under containment or extract
ventilation E66 Wear suitable gloves
tested to EN374 PPE15
No LEV 5 0 5 6.86 80 1.37 0.07 0.47 0.55 Handle substance within a closed
system. E47 Operate activity from
way from sources of substance
emission or release E77 Ensure
material transfers are under
containment or extract ventilation.
E56. Wear chemically resistant gloves
(tested to EN374) PPE15 Avoid
splashing C&H15
No LEV 10 30 7.0 1.37 0 1.37 Handle substance within a closed
Good GV 0.10 0.47 0.57 system E47 Provide a good standard
of general ventilation (3 to 5 air
changes per hour) E11 Provide extract
ventilation to point where emissions
occur E54 Wear suitable gloves tested
to EN374 PPE15
No LEV 5 0 5.0 6.86 80 1.37 0.07 0.47 0.55 Provide a good standard of general
ventilation (3 to 5 air changes per
hour) E11. Avoid manual contact with
wet work pieces EI17. Wear suitable
gloves tested to EN374 PPE15.
No LEV 5 0 5.0 13.71 90 1.371 0.07 0.47 0.55 Provide extract ventilation to points
where emissions occur E54. Wear
chemically resistant gloves (tested to
EN374) in combination with ‘basic’
employee training PPE16
With LEV. 20 95 1.0 E60 = 95% 2.14 0 2.14 0.01 0.74 0.75 Minimise exposure by partial enclosure
of the operation or equipment and
provide extract ventilation at openings
E60 Wear suitable gloves tested to
EN374 PPE15. Provide GV E11
With LEV. 100 95 5.0 E60 = 95% 2.14 80 0.43 0.71 0.15 0.86 Minimise exposure by partial enclosure
of the operation or equipment and
provide extract ventilation at openings
[E60]. {Wear suitable gloves tested to
EN374 [PPE15]}. Provide GV E11
No LEV 20 90 2.0 RPE (APF=10)) 21.85 95 1.09 0.03 0.38 0.41 Provide enhanced GV E48 Wear a
respirator conforming to EN140 with
Type A filter or better. PPE22 Wear
chemically resistant gloves (tested to
type EN374) in combination with
specific activity training PPE17 Ensure
operatives are trained to minimise
exposures EI19 Segregate the activity
away from other operations E63
No LEV 100 90 4.2 RPE (APF=10)) 21.85 95 1.09 0.60 0.38 0.98 Provide good GV E11 Wear a
operator training
respirator conforming to EN140 with
(reduces
Type A filter or better. PPE22 Wear
exposure by
chemically resistant gloves (tested to
15%) : good GV
type EN374) in combination with
(0.7x)
specific activity training PPE17 Ensure
operatives are trained to minimise
exposures EI19 Segregate the activity
away from other operations E63
No LEV 5 0 5.0 6.86 80 1.37 0.07 0.47 0.55 Provide general ventilation E11 Wear
suitable gloves tested to EN374
PPE15 Ensure material transfers are
under containment or extract
ventilation E66 Clear lines prior to
decoupling E39 Use drum pumps or
carefully pour from container E64
With LEV. 5 0 5.0 27.43 95 1.37 0.07 0.47 0.55 Wear chemically resistant gloves
(tested to EN374) in combination with
specific activity training. PPE17
Provide GV E11 Avoid splashing
C&H15 Avoid manual contact with wet
work pieces EI17.