Room units and controllers - Domat International
Room units and controllers - Domat International
Room units and controllers - Domat International
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MODBUS UI01x User interface V3<br />
latch enable 7 MSB R, W RAM after setting to 1, the latched value<br />
(register 10 MSB) for a particular bit<br />
changes to 0 <strong>and</strong> stays so until a<br />
new value is registered at the input;<br />
after power reset the complete<br />
register is set to 0<br />
time<br />
programme<br />
output<br />
password<br />
8 LSB<br />
8 MSB<br />
9 LSB<br />
9 MSB<br />
R<br />
R,W,<br />
EEPROM<br />
time scheduler output (the output<br />
value depends on the time schedule<br />
type, see the settings register<br />
password to access the protected<br />
items (e.g. party mode) –<br />
customized function<br />
inputs 10 LSB R readout of digital inputs (DI1, DI2,<br />
PUSH)<br />
latched values 10 MSB R catched values<br />
0 – since latch enable there was no<br />
change on the bit<br />
1 - since latch enable the bit value<br />
has changed its state<br />
set temp<br />
11 LSB<br />
11 MSB<br />
R,W<br />
EEPROM<br />
temperature set by user<br />
e.g. 21.5°C reads 2150<br />
(UX... read-only, blinds up)<br />
bit 2 ... DO 3<br />
(only for UX..., read-only,<br />
blinds down)<br />
to reset the individual set<br />
bits in the latched value<br />
register, set the particular<br />
bit to 1 (= disable <strong>and</strong><br />
enable latch)<br />
1) multistate scheduler:<br />
0x01, 0x02, 0x04<br />
(presence / day/night<br />
mode)<br />
2) analogue scheduler:<br />
directly the value<br />
saved in the time<br />
schedule registers<br />
default = 0x0000<br />
bit 0 ... DI 1<br />
bit 1 ... DI 2<br />
bit 2 ... PUSH button<br />
bit 0 ... DI 1<br />
bit 1 ... DI 2<br />
bit 2 ... PUSH button; to<br />
reset the bits, disable <strong>and</strong><br />
enable latch - see latch<br />
enable<br />
recalculate:<br />
set temperature =<br />
read value / 100<br />
set day<br />
/comfort temp<br />
set night /<br />
precomfort<br />
temp<br />
12 LSB<br />
12 MSB<br />
13 LSB<br />
13 MSB<br />
R,W<br />
EEPROM<br />
R,W<br />
EEPROM<br />
(default = 23 °C)<br />
day mode temperature setpoint<br />
set by user (when editing, the<br />
symbols thermometer <strong>and</strong> sun are<br />
active)<br />
(default = 23 °C)<br />
night mode temperature setpoint<br />
set by user (when editing, the<br />
symbols thermometer <strong>and</strong> moon<br />
are active)<br />
(default = 18 °C)<br />
0 … 0<br />
199.99 … 19999<br />
-0.01 … 0FFFFhex<br />
-199.99 … 0B1E1hex<br />
recalculate:<br />
set temperature =<br />
read value / 100<br />
0 … 0<br />
199.99 … 19999<br />
-0.01 … 0FFFFhex<br />
-199.99 … 0B1E1hex<br />
recalculate:<br />
set temperature =<br />
read value / 100<br />
0 … 0<br />
199.99 … 19999<br />
-0.01 … 0FFFFhex<br />
-199.99 … 0B1E1hex<br />
6