congress brochure - Cendres & Métaux SA
congress brochure - Cendres & Métaux SA congress brochure - Cendres & Métaux SA
+ Cendres+Métaux Your reliable partner for precision superstructures on implants. See us at booth B 22 + Dalbo ® -PLUS: the only individually adjustable overdenture attachment + Dolder ® System: the reference for implant supported bar restorations + SFI-Bar ® : a new unique stress-free bar system on implants + Esteticor Implant ® : especially developed precious metal alloys for restorations with accurate fit on implants Dental
- Page 2 and 3: Dalbo ® -PLUS: the only individual
- Page 4: Dolder ® System: the reference for
+ <strong>Cendres</strong>+<strong>Métaux</strong><br />
Your reliable partner for<br />
precision superstructures<br />
on implants.<br />
See us at booth B 22<br />
+ Dalbo ® -PLUS:<br />
the only individually adjustable<br />
overdenture attachment<br />
+ Dolder ® System:<br />
the reference for implant<br />
supported bar restorations<br />
+ SFI-Bar ® :<br />
a new unique stress-free bar<br />
system on implants<br />
+ Esteticor Implant ® :<br />
especially developed precious<br />
metal alloys for restorations<br />
with accurate fit on implants<br />
Dental
Dalbo ® -PLUS:<br />
the only individually adjustable overdenture attachment<br />
+ Individually adjustable retention in seconds<br />
+ The mostly used overdenture attachment<br />
+ Compensation of divergence<br />
+ Easily exchangeable inserts<br />
Dalbo ® -PLUS<br />
Dalbo ® -PLUS elliptic<br />
It would be hard to imagine the field of implantology without ball<br />
anchor systems. They are cost effective, easy to clean for the<br />
patient and they have a long lifetime. A great number of patients<br />
found their quality of life significantly improved by this type of<br />
therapy.<br />
The 2.25 mm diameter ball anchor introduced by <strong>Cendres</strong>+<strong>Métaux</strong><br />
almost 50 years ago has become a benchmark. Several implant<br />
systems e.g. Straumann, Nobel Biocare, Camlog, 3i and many<br />
more, feature this ball diameter.<br />
The Dalbo ® -PLUS – the most widely used implant overdenture<br />
attachment – can be identified by the titan-coloured edge of its gold<br />
yellow lamellae retention insert.<br />
It is activated with a special screwdriver.<br />
Dalbo ® -PLUS elliptic with adjustable<br />
gold lamellae retention insert.<br />
Activation: The Dalbo ® -PLUS offers the unique feature that the<br />
retention can be easily adjusted according to the patient’s mouth<br />
situation and requirements. Retention strength can be increased<br />
from 200 g to 2’200 g (see diagram).<br />
Real compensation of implant divergence: Diverging implants /<br />
abutments can be compensated up to 40° depending on the implant<br />
system. Thanks to the gold lamellae retention insert, durable<br />
denture retention is ensured.<br />
(Ludwig K.; Kern M.; Hartfill H.: Analysis of the wear of ball attachments<br />
with 50’000 fitting-withdrawal cycles in a water bath and eccentric end<br />
loading. Quintessence Journal of Dental Technology, 02.2006).<br />
Easy replacement<br />
Inserted – activated – READY!
SFI-Bar ® :<br />
a new unique stress-free bar system on implants<br />
+ Maximum adaptation to mouth situation with stress-free fit<br />
+ Simple processing reduces working time up to 90 %<br />
+ Profitable for dentist, dental technician and patient<br />
+ Scientifically proved<br />
The fully prefabricated titanium parts require no critical procedures<br />
like casting, soldering, laser welding or milling.<br />
Highly sophisticated parts and instruments allow safe and easy<br />
processing.<br />
Due to the telescopic design of the bar joints no lateral stress is<br />
applied to the implants. The risk of implant failure is therefore<br />
significantly reduced.<br />
SFI-Bar ® titanium female part<br />
with replaceable retention inserts<br />
SFI-Bar ® asymmetrical gold<br />
female part requires minimum<br />
space for integration!<br />
max. 26.00<br />
min.10.00<br />
15° 15°<br />
100°–150°<br />
SFI-Bar ® for 4 implants:<br />
individually adjustable tube<br />
lengths and angles<br />
SFI-Bar ® for 2 implants:<br />
individually adjustable tube length
Dolder ® System:<br />
the reference for implant supported bar restorations<br />
+ New micro female part in titanium (milled) with replaceable<br />
friction inserts<br />
+ Individual and precise setting of the retention force thanks to<br />
3 friction strenghts smooth, normal and strong<br />
+ Unique guide grooves allow easy reduction and customizing of the<br />
female part in titanium<br />
+ New male part micro in burnout plastic<br />
+ High-quality gold bar attachment<br />
Bar attachment with gold<br />
female part<br />
Mouth situation<br />
Micro female part in titanium<br />
with replaceable friction inserts<br />
Cutting the female part to the<br />
required length<br />
Esteticor Implant ® :<br />
especially developed precious metal alloys for restorations with<br />
accurate fit on implants<br />
+ 3 Esteticor Implant ® alloys containing either 76 %, 58 %<br />
or 32 % of gold<br />
+ Absolute accuracy of fit<br />
+ Highest corrosion resistance<br />
With Esteticor Implant ® , the new precious metal alloys from<br />
<strong>Cendres</strong>+<strong>Métaux</strong>, the specific challenge can be mastered easily.<br />
Especially developed for restorations on implants the Esteticor<br />
Implant ® alloys allow absolute accuracy of fit and offer the highest<br />
corrosion resistance at an interesting price / performance ratio.<br />
Accurate marginal fit<br />
Perfect castings<br />
10.2007<br />
<strong>Cendres</strong>+<strong>Métaux</strong> <strong>SA</strong><br />
Rue de Boujean 122<br />
CH-2501 Biel/Bienne<br />
Phone +41 32 344 22 11<br />
Fax +41 32 344 22 12<br />
info@cmsa.ch<br />
For more details and to order online,<br />
please visit:<br />
www.cmsa.ch/dental