IMPORTANT NOTES! WARNING - Ramsey Winch

STEP 5
Place roller fairlead over holes in mounting plate. Install (2) 3/8-16 NC X 1 lg. capscrews #11 through
(2) 3/8” lockwashers #20, then through inside holes in mounting plate and into the threaded holes in
bottom of roller guide. Install (2) 3/8-16 NC X 1-1/2 lg. capscrews #12 through outside holes of
mounting plate and roller guide and secure using (2) 3/8 lockwashers #20, and (2) nuts #18. Tighten
hardware to proper torque value (see Torque value chart, page 6).
SEE PAGE 2 OF WINCH OWNER’S MANUAL FOR CABLE INSTALLATION, PAGE 3 FOR
HYDRAULIC SCHEMATICS, AND PAGE 14 (VIEW A-A) FOR HYDRAULIC LINES INSTALLATION.
REFER TO WINCH OWNER'S MANUAL FOR PROPER OPERATIONS.
5