IMPORTANT NOTES! WARNING - Ramsey Winch
IMPORTANT NOTES! WARNING - Ramsey Winch
IMPORTANT NOTES! WARNING - Ramsey Winch
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
STEP 1<br />
Unfasten plastic splashguard from radiator support bracket. Remove vehicle tow hooks and vehicle<br />
bumper. Remove and discard shims hanging from front of vehicle frame.<br />
Enlarge rectangular cutout in bumper bracket by 1/2" at top and 1/4” at bottom. See REAR VIEW OF<br />
BUMPER below.<br />
Attach nut plate #4 to inside of bracket assembly #7 & #8 using (2) 1/2-13NC x 1-1/4 lg. capscrews<br />
#16 with lockwashers #21, and flatwashers #22, in the two front holes each side.<br />
You will need assistance for this step.<br />
While holding bumper in place, install end of R.H. and L.H. bracket assemblies through bumper and<br />
bumper brackets and into ends of R.H. and L.H. vehicle frame. Secure brackets to front of frame<br />
using (2) 1/2-13NC x 1-1/2 lg. capscrews #13, with lockwashers #21, nuts #19 and nut strips #1, each<br />
side. DO NOT TIGHTEN HARDWARE COMPLETELY.<br />
1
Change language